Jump to content
dtmdragon

McDonnell RF-4X Phantom II UPDATED w download

Recommended Posts

post-59028-0-60974400-1472725743_thumb.jpg


 


post-59028-0-33245700-1472725747_thumb.jpg


 


post-59028-0-11847800-1472725750_thumb.jpg


 


post-59028-0-13388400-1472725755_thumb.jpg


 


post-59028-0-17174800-1472725759_thumb.jpg


 


post-59028-0-72232000-1472725761_thumb.jpg


 


 


The F-4X and RF-4X were proposals for advanced F-4E derivatives designed by General Dynamics to carry the HIAC-1 long focal length camera as part of Project Peace Jack. This project was a joint Israel-USAF study for an advanced photo-reconnaissance aircraft capable of Mach 3+ performance.


 


The HIAC-1 camera was an advanced high-altitude reconnaissance camera that had a focal length of 66 inches which offered unparalled resolution at extreme ranges The HIAC-1 camera was originally so large and heavy that it could only be carried by the Martin/General Dynamics RB-57F. However, later versions were sufficiently slimmed down so that they could potentially be carried by smaller aircraft such as the F-4 Phantom.


 


Israel had always wanted the HIAC-1 camera for its own use in keeping track of its Arab neighbors, but its requests had always been turned down. However, in 1971, US attitudes towards export of the HIAC-1 camera changed and approval was given for the development of a pod (designated G-139) which could carry this camera on the belly of a Phantom. The prototype G-139 pod was over 22 feet long and weighed over 4000 pounds, and was first tested on an RF-4C in October of 1971.


 


Unfortunately, the G-139 was still so large and bulky that the performance of the Phantom when it was carrying the pod was unacceptably poor. The Peace Jack project originated in an attempt to improve the performance of the Phantom when carrying this camera. Both the USAF and the government of Israel contributed funds for the project.


 


Rather than trying to slim down the reconnaissance pod, the original goal of the General Dynamics team was to improve the performance of the Phantom that was carrying it. The improved performance was to be obtained by using water injection for pre-compressor cooling, which would provided increased engine thrust at high altitudes. A similar system had been used successfully in the past in various F-4 record attempts. The water was to be contained in a pair of gigantic 2500-gallon tanks which were to be attached conformally to the intersection joints of the fuselage spine and the engine nacelles. The water injection system promised to give a 150 percent increase in engine thrust at altitude. In order to accommodate the increased engine thrust that would now be available, new air intakes had to be designed. The area of the intakes was to be made much larger and they were to contain a sophisticated system of internal cowls, splitter plates, vortex generators and bleeds. With the new intakes and the water injection system, it was anticipated that maximum speeds of up to Mach 3.2 and cruising speeds of up to Mach 2.7 could be attained. The project came to be known as the F-4X, although this was not an official USAF designation.


 


Israel was clearly very interested in the F-4X, as it promised a a performance which would approach that of the USAF's SR-71. This would enable it to fly unimpeded anywhere it wanted to. However, the advanced performance of the F-4X clearly made it a possible candidate for a new interceptor. Consequently, the US State Department became more than a little worried about the export of such advanced technology overseas, since it promised to give Israel a potential interceptor which was more capable than anything currently in the US arsenal, one which might one day pose a threat to the SR-71. In addition, the Air Force was itself rather nervous about the F-4X project, since it might threaten to divert support away from the F-15 program which was just then getting underway. As a result, the State Department decided to disallow export of this technology to Israel.


 


This ordinarily would have been the end of the game. However, in the meantime, Israel had expressed concern about the amount of aerodynamic drag produced by the pod carrying the camera. In response to these concerns, General Dynamics decided to relocate the HIAC-1 camera to the nose, displacing the AN/APQ-120 radar. The project was redesignated RF-4X. The removal of the interceptor capability seems to have reassured the State Department, and Israel was once again allowed back into the Peace Jack program.


 


An ex-IDFAF F-4E (USAF serial 69-7576) was delivered to General Dynamics in December of 1974 to act as a mockup for the RF-4X. The nose was recontoured on the starboard side only, and a paper-mache coolant tank was fitted to one side of the upper fuselage. New intakes with revised variable ramps were fitted. However, in the meantime, the Air Force began to have second thoughts about the project, still fearful of the impact of the RF-4X on the F-15 project and nervous about the safety and reliability of pre-compressor cooling. The USAF withdrew from the project shortly thereafter, forcing Israel to go it alone. By itself, Israel could not afford to continue the project, and the RF-4X program quietly died.


 


The idea for the nose-mounted HIAC-1 camera was later revived to form the basis of the F-4E(S), which was first applied to F-4E 69-7576. The F-4E(S) pilot and systems officer wore full pressure suits from the David Clark Company which also made the pressure suits used by USAF U-2 and SR-71 crews as well as Space Shuttle crews.


 


 


[MissionData]

 

Ceiling=23800

 


 


[FlightControl]

 

MaxSpeedSL=1097.6

MachLimit=3.2

MachLimitDry=2.4

 

 

[Fuselage]

 


SystemName[027]=CFTR_fuel

SystemName[028]=CFTL_fuel

 

 

[Engine1]

 




AltitudeTableNumData=40

AltitudeTableDeltaX=609.6

AltitudeTableStartX=0.0

AltitudeTableData=1.000,0.952,0.906,0.860,0.816,0.773,0.731,0.691,0.652,0.614,0.578,0.543,0.578,0.614,0.652,0.691,0.731,0.773,0.816,0.860,0.906,0.952,0.1000,1.100,1.200,1.300,1.400,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,0.000

 




[Engine2]

 



AltitudeTableNumData=40

AltitudeTableDeltaX=609.6

AltitudeTableStartX=0.0

AltitudeTableData=1.000,0.952,0.906,0.860,0.816,0.773,0.731,0.691,0.652,0.614,0.578,0.543,0.578,0.614,0.652,0.691,0.731,0.773,0.816,0.860,0.906,0.952,0.1000,1.100,1.200,1.300,1.400,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,1.500,0.000


 




 

[CFTR_fuel]


SystemType=FUEL_TANK

FuelTankID=9

MaxFuelAmount=1133.98

SelfHealing=FALSE

FireSuppression=TRUE

MinExtentPosition= 3.98,-0.69, 0.25

MaxExtentPosition= 1.32, 2.12, 0.92

 

[CFTL_fuel]

SystemType=FUEL_TANK

FuelTankID=9

MaxFuelAmount=1133.98

SelfHealing=FALSE

FireSuppression=TRUE

MinExtentPosition=-3.98,-0.69, 0.25

MaxExtentPosition=-1.32, 2.12, 0.92

Edited by dtmdragon
  • Like 13

Share this post


Link to post
Share on other sites

Cool. plz release when can

 

You know he posted how to do it, right?

Share this post


Link to post
Share on other sites

Cool. plz release when can

 

 

You know he posted how to do it, right?

 

1, Download and install the Mirage Factory F-4E(s) Shablol Updated for SF2 1.0: http://combatace.com/files/file/13473-mirage-factory-f-4es-shablol-updated-for-sf2/
 
2, Go into your mods folder, navigate to the aircraft folder and rename the F-4E(s) Shablol's main folder 'F-4E(S)' to 'RF-4X'
 
3, Download and unpack the 7z file attached to this post: objects.7z
 
4, Copy and paste the 'Aircraft' and 'Pilots' folder into the 'objects' folder in your mods folder, IMPORTANT: make SURE you merge and overwrite the files when you do.
  • Like 1

Share this post


Link to post
Share on other sites

I've download, applied and tested to my F-4X Ace Combat Mod.. WOW! Now I have Pocket SR-71 arm to the teeth! :biggrin:  Thank you very much for your effort, Sir!

F-4X.jpg

Share this post


Link to post
Share on other sites

Hi,

Thanks a lot for your excellent design. Could you please tell me how I can download this plan? Do you have the link? Thanks a lot. 

Share this post


Link to post
Share on other sites
7 hours ago, Falcon1364 said:

Hi,

Thanks a lot for your excellent design. Could you please tell me how I can download this plan? Do you have the link? Thanks a lot. 

 

3, Download and unpack the 7z file attached to this post: objects.7z     <------ Just Click this undelined text above.. this should be auto download.

Share this post


Link to post
Share on other sites

Thank you for sharing this great mod. I did copy/paste the RF-4X into my aircraft folder, but it does not show in my plane list. Do you know what can cause this issue? Thanks a lot. 

Share this post


Link to post
Share on other sites
23 minutes ago, Falcon1364 said:

Thank you for sharing this great mod. I did copy/paste the RF-4X into my aircraft folder, but it does not show in my plane list. Do you know what can cause this issue? Thanks a lot. 

1, Download and install the Mirage Factory F-4E(s) Shablol Updated for SF2 1.0: http://combatace.com/files/file/13473-mirage-factory-f-4es-shablol-updated-for-sf2/
 
2, Go into your mods folder, navigate to the aircraft folder and rename the F-4E(s) Shablol's main folder 'F-4E(S)' to 'RF-4X'
 
3, Download and unpack the 7z file attached to this post: objects.7z
 
4, Copy and paste the 'Aircraft' and 'Pilots' folder into the 'objects' folder in your mods folder, IMPORTANT: make SURE you merge and overwrite the files when you do.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..