212 files
-
Sand camo for my BMP-2 vehicle
By wingwiner
This is a new graphic layers for my BMP-2 offensive vehicle. 'Sand" camo without UN insignia. Read info.txt how to install new skin.
102 downloads
-
Humvee M1025 Weapon Carrier
Humvee M1025 Weapon Carrier (SF-1 gen)
Thank you very much to Steve S for the excellent 3D-Model of Browning M2
Original 3D model and skin, taken from the blog http://gratis3darg.blogspot.com/
Used under license GNU
Tested by: FALLSCHIRMJAGER
To use this model you only have to release the contents of the GroundObjects folder inside the folder the same name in your game...
Greetings
221 downloads
-
M113 Fighting
By wingwiner
This is a mod of oryginal Strike Figters 1 M113 vehicle. It has a working new gun, some changes in model, and new textures.
137 downloads
(3 reviews)0 comments
Updated
-
Tiger_Tanks.zip
By RAVEN
Tiger_Tanks.zip
V1.0
For WOX ETO, MTO 06 patch level installs:
PzKpfw VI TIGER I Ausf.E
Sturmmörserwagen 606/4 mit 38 cm RW 61.
JagdSturmTiger mit 88mm L56 (No Hard data on this tank)
Each with Two skins, Gray and Desert
Nation Names are set to "Axis Germany"
---------------------------------------------------------------------------------
To Install: unzip and place the Tiger1,SturmTiger And JagdSturmTiger into the GroundObjectfolder.
Weapons to the weapons folder.
-----------------------------------------
Adding Weapons and Guns: You need to use the SF1 06 patch level weapons editor to add weapons, SF1 Gun editor to add Guns.
Note: Check GunData.ini for the 88MM_L56,You may have it installed.
--------------------------------------------------------------------------------
Credits:
TW
3D Models,Textures Myself.
Monty CZ for the working artillery data.
.
This Mod is Freewear and not to be sold!
Raven
10/30/12
152 downloads
(1 review)0 comments
Submitted
-
Stryker ICV 1.1
By EricJ
Read the README
For those who downloaded the vehicle prior, change the values in the DATA.ini with these:
Armor[FRONT].Thickness=60
Armor
.Thickness=30
Armor
.Thickness=30
Armor[REAR].Thickness=30
Armor[TOP].Thickness=40
289 downloads
-
Upgrade to BMP-2 vehicle : low poly LODs
By wingwiner
If you have my BMP-2 vehicle : upgrade contains three _lod files. It allows to increase number of units you can put on the mission without FPS degradation.
And BONUS : new moro camouflage skin. View the screenshot.
85 downloads
(1 review)0 comments
Submitted
-
(0 reviews)0 comments
Updated
-
ASTROS-3
By rebel ryder
ASTROS-3
Para deixar um pouco de Sherman. Saudações à comunidade brasileira.
329 downloads
(1 review)0 comments
Submitted
-
GEPARD_LEOPARD
By gerald14
Put the files in your GroundObjects.folder and the lastest weapons pack!!
:-)
I Had put this files for SP4
Files:
Soviet Leopard.ini by me
Model by Gabilon
Germany Leopard.ini by me
Model by Gabilon
Gepard.ini by USAFMTL
This file was by Gerald14 (ini)
Models:Gepard
Gebilon ini.by USAFMTL
And thanks to gepard for the great models!!!
Update!!!!!
Must have the old file of this because you will need the data.ini
550 downloads
(2 reviews)0 comments
Updated
-
Ba_349B Natter (Viper) Launch Site
By RAVEN
Ba_349B Natter (Viper) Launch Site
Terrain target objects for any WWII ETO terrain.
Unzip and drop the contents of the ‘Add to Terrain’ folder into a Terrain folder then add data to the Targets.ini and Types.ini files. I have supplied ‘Reference Data only’.
-----------------------------------------------------------------
Zip includes:
4 Ba-349B Natters.
1 on a Trailer.
1 on Trailer with a T-20 Komsomolets armored tractor (Captured).
1 Engine maintenance and repair station.
1 Field type Pinepole launch gantry.
And Destroyed models for each.
Templates.
Credits:
Models, Textures Myself
Legal BS: By Wrench
This is freeware; it CAN be distrubuted if the original readmes and all other pieces of the package remain intact.
The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
This package may NOT in any way, shape or form be used in any payware additions.
Raven
09/22/13
86 downloads
(1 review)0 comments
Submitted
-
NATO Vehicle Depot v1.1
By ignacioc91
This is a NATO Vehicle Depot. This is an enhanced version. If you have the old one, just delete it and install this one. Instructions in the README pdf included.
It has SAMs, but for a dark reason, the may not appear. I hope you enjoy it!!!!
There are some new requirements:
Stryker M-1113 CV by SUICIDAL: http://combatace.com/files/file/11031-stryker-m-1113-cv/
Stryker M-1134 ATGM by SUICIDAL: http://combatace.com/files/file/11033-stryker-m-1134-atgm/
Stryker M-1128 MGS by SUICIDAL: http://combatace.com/files/file/11047-stryker-m1128-mgs/
M2/M3 Bradley by Kesselbrut: http://combatace.com/files/file/2747-m2m3-bradly/
Forgot to say in the README: The original author of the platte is Mitch. This depot must be placed on a flat area, as the plate is a flat objets, the same as with air bases. You should choose a flat area of the terrain, or a previously flattened area using Third Wire's Terrain Editor.
Regards,
Ignacioc91
184 downloads
(0 reviews)0 comments
Updated
-
(1 review)0 comments
Updated
-
Alvis Stormer HVM & Starstreak Missile v1.1
By winterhunter
The British Starstreak SAM and the Alvis Stormer HVM launcher.
Starstreak is a British short range surface-to-air missile manufactured by Thales Air Defence Limited (originally Shorts Missile Systems), in Belfast. It is also known as Starstreak HVM where HVM stands for "High Velocity Missile". After launch the missile accelerates to approximately Mach 3.5, at which point it launches three laser beam riding submunitions. The use of three submunitions increases the likelihood of a successful hit on the target. Starstreak has been in service with the British Army since 1997.
(Source: http://en.wikipedia.org/wiki/Starstreak_missile)
Now in version V1.1 with some small corrections:
+ The optronics turret does not "crash" into the missile turret anymore.
+ The visual detection range has been somewhat bettered.
+ The thrust curve of the missile has been tweaked to improve the Pk.
+ The seeker FOV has been enlarged to ensure more frequent engagements in high angular velocity conditions.
422 downloads
(1 review)0 comments
Updated
-
TAM VCLM
By Zonda
TAM VCLM
Chasis Skin: TORNO (Banidos Team)
Torret Skin: ZONDA (Virtual Combat Squad "Cruz del Sur")
3D Model:SUICIDAL
To use this model you only have to release the contents of the
GroundObject folder inside the folder the same name in your game...
372 downloads
(0 reviews)0 comments
Submitted
-
Monty cz crater file
By Monty CZ
MontyCZ made this effect for bombing runs in SFP1, bunyap made an easy to use zip file for all
521 downloads
(0 reviews)0 comments
Updated
-
Bofors 40 mm L70 Antiaircraft gun
By ojcar
New Bofors 40 mm L70 Antiaircraft gun, using the 3D from Kesselbruth's Bofors 40mm L60 Antiaircraft gun. New version with radar and new gundata to make it useful for NF4+ and SF2V/WOV air and ground expansion pack (normal difficult for russian aaa guns).
Also, alternate Bofors L60 Antiaircraft gun and alternate Cold War Antiaircraft guns GUNDATA.INI, simulating Shrapnel. This alternate data is lighter than NF4+ and SF2V/WOV air and ground expansion pack (normal difficult for russian aaa guns), but heavier than the out of the box Thirdwire AAA.
Please, read the Readme.
Good flying to Red mudmovers!
Thank you, Kesselbruth, for your wonderful work, and all Thirwire
Community (the best modding community ever).
Be free to use or mod these files in any freeware mod.
240 downloads
(0 reviews)0 comments
Updated
-
Humvve
By SUICIDAL
Humvve (SF-1 gen) by BANIDOS TEAM
3D Model:SUICIDAL
Skins: TORNO
To use this model you only have to release the contents of the
GroundObject folder inside the folder the same name in your game...
-This Model is FREEWARE . Feel free to use this mod for any
future projects as long as proper credit is given..
321 downloads
-
(0 reviews)
0 comments
Submitted
-
TAM
By SUICIDAL
Tanque Argentino Mediano (SF-1 gen) by BANIDOS TEAM
Skins: TORNO
3D Model:SUICIDAL
To use this model you only have to release the contents of the
GroundObject folder inside the folder the same name in your game...
-This Model is FREEWARE . Feel free to use this mod for any
future projects as long as proper credit is given..
307 downloads
(1 review)0 comments
Submitted
-
Infantry Service Pack 4 with updated license information
By TeTeT
This Infantry mod has been repackaged for use with SP4.
The following guns have to be found in gundata.ini:
GunTypeName=40MM_M79
GunTypeName=50CAL_M2
GunTypeName=5.56mm_Assaultrifle
GunTypeName=66MM_LAW
GunTypeName=7.62MM_M60
GunTypeName=7.62mm_PKB
GunTypeName=7.62MM_Rifle
GunTypeName=84MM_AT-4
GunTypeName=Bazooka
GunTypeName=RPG-7
All of them should be found in the latest weapons pack.
The original license of this mod applies. You must not repackage this mod or use it without
permission of the original authors.
=== ORIGINAL Readme.txt ===
This is an Infantry mod for Strikefighters Project 1 from Thirdwire.
This mod is only testet with SFP1 SP, not with WOV, it is not supported by Thirdwire
The files made by me are freeware, if you want to use it, name me in the Disclamer.
If you want to distribute files made by Pasko Patak, you have to ask him first.
You are not free to charge for it or otherwise try to make money with it.
3D-Files in this Pack made by Pasko:
Platoon.lod
Soldier_AT-3.LOD
3D-Files from me:
US_Squad.LOD
US_Squad_early.LOD
M113_ACAV.LOD
VC_Squad.LOD
All *.ini's edited and balanced by me, so they should work.
All Gundata's are balanced, so they should me work proper ingame (the settings are not realistic so don't wonder, that a Bazooka firing with 800m/s)
Installation:
1.
Backup folowing files: BulletObject.ini, GroundObjectData.ini, Gundata.ini and Gundata.dat(in \Objects), Weapondata.ini and WeaponData.dat (in \Objects\Weapons)
2.
copy BulletObject.ini, GroundObjectData.ini, Gundata.ini and Gundata.dat and all the other Files into \objects
copy Weapondata.ini and WeaponData.dat into \Objects\Weapons
- latest Weaponpack form 19.Nov04 is included
3. open GroundObjectData.ini (found in \objects or extract it from ObjectData.cat)
Merge folowing entrys in it and correct the XXX with continuous numbers:
[Objectxxx]
ObjectName=M113_ACAV
ObjectFullName=M 113 ACAV w. US Special Forces
ObjectDataFile=M113_ACAV_Data.INI
[Objectxxx]
ObjectName=US_Squad
ObjectFullName=US Infantry Squad
ObjectDataFile=US_Squad_data.ini
[Objectxxx]
ObjectName=US_Squad_early
ObjectFullName=US Marines Squad
ObjectDataFile=US_Squad_early_data.ini
[Objectxxx]
ObjectName=Soviet_Squad
ObjectFullName=OPFOR Infantry Squad
ObjectDataFile=Soviet_Squad_data.ini
[Objectxxx]
ObjectName=VC_Squad
ObjectFullName=Vietcong Squad
ObjectDataFile=VC_Squad_data.ini
[Objectxxx]
ObjectName=NVA_Squad
ObjectFullName=North Vietnamese Squad
ObjectDataFile=NVA_Squad_data.ini
[Objectxxx]
ObjectName=Soldier_AT-3
ObjectFullName=Soviet AT-3 Sagger
ObjectDataFile=Soldier_AT-3_data.INI
to use the Units in Campaign, Yuo have to edit the "Campaignname"_Data.ini
in this Pack is a Mission for testing the new Groundobjects
Have fun
Kesselbrut, Munich Germany
227 downloads
-
(3 reviews)0 comments
Submitted
-
AMX-30B2
By Steve s
AMX-30B2 for WOI and Wings over Europe, patch Oct 2008
Installation:
Unzip to a temp director,than move the entire folder into the groundobjects folder.
That's it!!
Any suggestions are welcome
This addon is FREEWARE, feel free to use it in any mission / campaign / mod you suggest,BUT not in any PAYWARE!!!.
Stefano "Steve" S.
April 2009
360 downloads
(2 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
M-47 Patton European Army
By Steve s
The package contains four examples for many European armies.
Unzip to a temp director,than move the folder into groundobjects folder.
That's it!!
This addon is FREEWARE, feel free to use it in any mission / campaign / mod you suggest,BUT not in any PAYWARE.
321 downloads
(3 reviews)0 comments
Submitted
-
Infantry Pack Update
By Pappa Goat
This is an update for the infantry pack for the WOV Enhanced Ground war Campaign.
Thrilled ith a better ground war, yet unhappy with the lack of ground action I meshed parts of the object DATA files from the infantry pack with those of the superb Falklands mod. Result, you now have ground units that fire, including at you!
Instructions: Just drop the appropriate DATA file intot he folder of each unit in your Ground Objects folder.
Known Issues:
I find sometimes that the VC squad will be facing the opposite direction from the US squad and will nto rotate all the way around to engage in a firefight.
Next: Modding a special forces/ LRRP squad, and modding the M-113 ACAV squad to be a real ACAV squad and not special forces ith an ACAV which makes no sense. Also, to make the NVA Squad look like NVA.
253 downloads
(0 reviews)0 comments
Submitted
Sign in to follow this
Followers
0
-
Download Statistics
14,206
Files12,481
Comments26,857
Reviews