First Eagles - WWI and Early Years - Add-On Aircraft

The Fokker Aircraft Company produced several biplanes during the time it was producing it's famous Eindeckers. Two of them, the M.7 and the M.10 were purchased by Austria-Hungary and were both designated the "B.I" My version is the M.7 (I believe Bwf/Bortdafarm's version is the M.10 since it has a wider lower wing.)
 
The M.7/B.I was a two seater plane for reconnaissance and carried no guns. The pilot was in the rear seat. Later in the war, when the B.I was used for training, some of them were fitted with dual controls.
 
Mine is unarmed, like most planes used in the early months of the war, but there is a loadout for a couple of handgrenades.
 
I have included two skins, one Austrian, the other German, with appropriate decals for each. I have included my skinning templates so others can make new skins if they want.
 
 
Historical Notes
The serial numbers are fictitious. The cockpit is based on the Eindecker cockpit, since I could find no photo's of the B.I cockpit.
 
 
Credits
My thanks to ojcar, who created the FM for the Fokker B.I.
 
My thanks also to Nix, who provided the sound for the Gnome 80hp engine. (This is the same sound file I uploaded with the Sikorsky. If you already have either of the Sikorsky's you won't need to install the sound.)
 
 
Installation instructions
Note: The name uses an "I", not a one. If you type it wrong, the game won't recognize the plane.
 
For FE1 - Unzip the file and move the folder named "FokkerM7BI" into the "Aircraft" folder in the FirstEagles/Objects folder. You may also need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "FokkerM7BI" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FokkerM7BI". Move the folder named "D" from the Aircraft/FokkerM7BI folder into the Decals/FokkerM7BI folder you just made. You may also need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

Several variations of the BE2 were produced by the Royal Aircraft Factory from 1912 until the end of World War 1. The BE2c was introduced in 1914 and was produced in large numbers. It was designed to be a very stable plane, which was desirable in a reconnaissance plane, but not very effective for a fighter. During its service, the BE2c was used mostly for recon missions, but it sometimes served as a fighter and as a light bomber.
 
I have included two skins, a stock linen, and a brown paint. A full set of number decals are included for each skin. My skinning templates are included in the download.
 
The gunner in the BE2c sat in front of the pilot and either had multiple guns, or was able to move the gun between multiple mounts. The game engine does not allow this, so I set up the data file to limit the gunner's aim to the upper rear of the plane. However, I provided alternate lines in the FM which will allow you to widen the gunner's aim, but that makes the gun pass through the struts, and sometimes shoot through the wing.
 
Instructions for changing the gunner's range of motion are included in the download.
 
Credits
Thanks to Ojcar for making the data file for the BE2c and for providing resources for the model.
Thanks also to 33Lima and Hansa who provided resources for the cockpit and help with details of the model.
Thanks to Mike Dora for identifying and helping me fix problems with the gunner.
Thanks to Nicholas Bell for correcting the hit box coordinates for this plane.
 
Installation Instructions
For FE1 - Unzip the file and move the folder named "RAFBE2C" into the FirstEagles/Objects/Aircraft folder.
 
For FE2 - Unzip the file and move the folder named "RAFBE2C" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "RAFBE2C". Move the folder named "D" from the Aircraft/RAFBE2C folder into the Decals/RAFBE2C folder you just made.

Stock AI RE8 made player-flyable, for FEG & FE2. See readme for installation etc. Loadout screen locks up in FE2; will upload fix if/when found.
 
OFF has a Harry Tate already, RoF is about to get one. Couldn't find an RE8 for FE so made this myself.

Morane-Saulnier N Monoplane version 1.3
18 May 2007
 
By Vernon "p10ppy" Bowden
 
Please read the Installation.txt for other notes and installation instructions

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
------------------------------------------------------------------------------------------------
 
AVRO 504C For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
 
notes;;;
fm- player version (hard)
slot car flyers need not apply!
 
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

So you all have the wonderful Pfalz DIII and DIIIa by the A-Team?
 
And the not least wonderful Peter01 FM for this bird?
 
Very well, I have tuned a little more the FM because I think it needed to be a little tuned down. The DIIIa in game was faster than an Albatros DVa (180Hp) (just the contrary to pilot
 
stories about it). No more!
The Pfalz D XII was the contrary case. It was a close competitor for the Fokker VII, but in game was slower than the old DIIIa, so it has a new FM as well.
I have made also an FM for the Roland DVIa, beacuse there is no Peter01 FM for this plane (I think so). It's fast and nimble, but doesn't climb very well. Probably needs more testing...
 
Besides, reading about the Mercedes DIII engine history I noticed that early Pfalz DIII had the Mercedes DIII engine and late Pfalz DIIIa had the Mercedes DIIIaü (180Hp), but this engine
 
was in service in March 1918 and the DIIIa were in the units in late 1917, so.....we were lacking an engine!
At the same time, Albatros DIII and DV were given the Mercedes DIIIa (170Hp), so I have made a 170 Hp Pfalz!

The A - Team has given me permission to release this to the forums and combat ace but that doesn't mean they endorse it yet. They may be sitting back laughing to hard to speak yet. Ya just never know.
 
Enough on that... its tuned for hard FM, Its a freak show to fly, its like riding on glass at times.... but if you work with it some you will find its a mean machine IMHO.
 
After being shown some articles from people who have been in the cockpits of a dr1, I tried to make the plane have the results they described. The plane seem to be washy and tends to be a bit un ruley but, if you can get hold of the reigns it's a blast.
 
This FM blows on normal, sorry
 
This is only version 1.0 trial runs. I have an account on CA and you can msg any useful info to me there for FM suggestions.
 
Installation :Go to wwi>objects>aircraft>dr1 Back up your dr1_Data.ini somewhere and drop this one in its place.
 
Firecage

This is just a mod of the original Nieuport 17 to represent the 17/23 familly
a C.1 model
early model with lewis wing gun "*"
model with 2 uper gun "*"
model with a uper gun and a fuselage gun"*"
model with 2 uper gun and fuselage gun"*"
 
"*" upgraded cockpits, so the gun on the fusselage must be carried out of sight
 
thanks to :
 
MontyCZ and Texmurphy for the original Nieuport 17
 
Whiteknight06604 for the N17 with uper gun
 
Aligator devil for is cockpit works and upgrade and hangar
 
peter01 for is flight model
 
please direct any questions about this mod to me at the below places.
 
 
instalation:
 
just drop the in your FirstEagles folder
 
and add all in the weapons folder in the weapon folder of your game and say ok to overwrite
 
 
if you add N17 in a campaing dont forget to add
 
Supply[001].WeaponType=lewis01
Supply[001].Quantity=240
 
a supply of the lewis in your squadron or the ghost lewis will come one more time
 
 
like this
 
[AirUnitxxx]
AircraftType=Nieuport17b
Squadron=139AS
ForceID=1
Nation=USAS
DefaultTexture=ESC124
StartNumber=1
BaseArea=Toul Aerodrome
RandomChance=100
BaseMoveChance=10
MaxAircraft=16
StartAircraft=16
MaxPilots=16
StartPilots=16
Experience=50
Morale=100
Supply=50
Intelligence=20
MissionChance[sWEEP]=90
MissionChance[CAP]=90
MissionChance[iNTERCEPT]=60
MissionChance[ESCORT]=70
MissionChance=10
MissionChance[CAS]=10
MissionChance[sEAD]=0
MissionChance[ARMED_RECON]=25
MissionChance[ANTI_SHIP]=0
MissionChance[RECON]=50
MissionChance[bALLOON_BUSTING]=15
MissionChance[bALLOON_DEFENSE]=10
UpgradeType=NEVER
Supply[001].WeaponType=lewis01
Supply[001].Quantity=240
 
 
Any questions or comments
Combatace handle christian59
 
hope you will have good time with this fighter

The much maligned SPAD A.2 was not nearly as dangerous as some people believe. It was actually a good idea in the days before the synchronized gun was perfected, and continued to be used on the Eastern Front throughout the war. The A.2 was SPAD's first fighter and was introduced in mid 1915.
 
My version is the Russian version which was built at the Dux factory in Moscow. The upper wing has a center panel above the fuselage, and the gunner is equipped with a Colt-Browning 30 caliber machine gun.
 
I have included four skinning options, identical except for the decals. There are skins for 3 Russian variations, and a skin for the French. I have included my templates and serial numbers for some of the skins, which will be applied randomly.
 
Historical Notes:
The serial numbers are fictitious.
 
Credits:
My thanks once again to Ojcar for making the excellent data.INI file for this plane.
My thanks to Nix for providing the engine sound for the LeRhone engine
Thanks also to Sinbad and Whiteknight06604 who provided resources for the SPAD A.2 and for the Colt-Browning machine gun.
 
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
 
 
Installation instructions:
For FE1: Unzip the file and move the folder named "SPADA2" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "rhone110bn4nC" into your FirstEagles/Sounds folder.
 
For FE2: Unzip the file and move the folder named "SPADA2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SPADA2". Move the folder named "D" from the Aircraft/SPADA2 folder into the Decals/SPADA2 folder you just made. You also need to move the sound file "rhone110bn4nC" into your FirstEagles/Sounds folder.
 
 
To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".

The Aviatik-Berg D.I had many variations, with different engines, different radiator configurations, different fuselage shapes, and different gun placements. This is a very early version, with a 185hp Daimler engine and a non-synchronized Schwarzlose machine gun mounted above the wing.
 
The machine gun is detachable and can be mounted or unmounted in the Loadout screen.
 
I have included one of Quack74's basic skins and decal sets with a set of serial numbers which will be applied randomly to each plane.
 
This plane has an extra piece that was not included in Quack's skins, I have included skins for the new part to match each of Quack's skins, which you will need to add to each skin folder.
 
Historical Notes
This version of the Aviatik did not have a cutout in the upper wing and the fuselage was higher in front of the fuselage. My model is converted from a later version and has not been corrected because I wanted to make sure that all of Quack's skins would still work with this plane.
 
 
Credits
My great thanks to Ojcar for making the FM and the Schwarzlose weapon data, and for teaching me how to make weapon stations.
Thanks to Quack 74 for making the skin and decal set for all the Aviatiks, and for allowing me use one as the default skin for this plane.
And thanks to Nix for making the engine sound file.
 
 
Installation Instructions
If you are using FE1, you will need to use the Weapons Editor available from the Thirdwire Downloads area. You will also need to use a CAT file extractor utility (SFP1E Extract Utility available in the CombatACE Downloads area.)
 
 
For FE1 - Unzip the file and move the folder named "AviatikD1_185" into the FirstEagles/Objects/Aircraft folder. This file uses the same sound file as the original AviatikD1. If you did not install that plane then you will also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
 
To install the gun - If you haven't already done so, extract the WeaponData.INI and the WeaponData.DAT files from the FirstEagles ObjectData.CAT file. Make a new folder named "Weapons" in the FirstEagles/Objects folder. Put the two extracted files into the new folder.
 
In my download, open the file named "Single_Schwarzlose_Angled_Data.INI," copy everything and paste it at the end of the "WeaponData.INI" you just extracted. Then change the number (WeaponData001) to the next consecutive number. Save the file.
 
In my downlaod, copy the files named "Schwarzlose.BMP" and "SchwarzloseAngle.LOD" and put them into the FirstEagles/Objects/Weapons folder.
 
Open the Weapons Editor, Open the WeaponsData.INI, make sure the new weapon (Single_Schwarzlose_Angled) is there, click "Save" and Close the editor.
 
 
For FE2 - Unzip the file and move the folder named "AviatikD1_185" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AviatikD1_185". Move the folder named "D" from the Aircraft/AviatikD1_185 folder into the Decals/AviatikD1_185 folder you just made. This file uses the same sound file as the original AviatikD1. If you did not install that plane then you will also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
 
To install the gun - From my download, copy the folder named "Single Schwarzlose Angled" into your Objects/Weapons folder.

Aviatik-Berg D.IDesigned by Julius von Berg for the Aviatik company, the D.I was the first fighter completely built in Austria. The Berg was light and maneuverable, and after structural problems in the early models were overcome, it became a good combat plane.
 
Although nimble, reasonably fast, and able to reach higher altitudes than many of the planes it fought, the Aviatik D.I was prone to overheating. Many pilots flew with the engine cover panels removed, so I built this plane without the engine cover.
 
Early versions of the plane had the two Schwarzlose machine guns mounted low on each side of the engine. Later versions put the guns higher and within reach of the pilot to make it easier to clear jammed guns. This is a later version with the guns firing through tubes under the manifolds and projecting through the radiator.
 
I have included a basic skin along with my skinning templates. I highly recommend the skins made by Quack74, available at CombatACE as a separate download.
 
Revision 1 - June 12, 2011It appears that I made the original about 20% too large. I have rescaled the plane to the correct size, this involved making some changes in and around the cockpit. Since I was revising the cockpit, I put the correct guns in this version (Schartzlose instead of Spandau.) I have also included the FM written by ojcar, and the sound for the Austro-Daimler engine made by Nix.This version includes all new LODs, new data file, new cockpit ini, and new decal ini. If you have downloaded the previous version, it would be easiest to just delete the whole folder and replace it with this version.
 
Revision 2 - September 20, 2011I have added a complete set of letter decals so you can set a flight letter in the Loadout screen, or the game will randomly assign a different letter to each plane. There will also be a different serial number randomly assigned to each plane as well.
 
Revision 3 - June 5, 2012I have made slight changes to the model, especially in the rigging. This revision has all new LODs. Ojcar has made changes to the FM to work with the new model. All the decals are the same as before.
 
Installation Instructions - New install
 
For FE1 - Unzip the file and move the folder named "AviatikD1" into the "Aircraft" folder in the FirstEagles/Objects folder. You also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "AviatikD1" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AviatikD1". Move the folder named "D" from the Aircraft/AviatikD1 folder into the Decals/AviatikD1 folder you just made.You also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
 
Installation Instructions - Update existing install
 
For both FE1 and FE2 - Delete the following files and replace them with the new versions: All the LOD files and OUT files - you are deleting three of each and replacing them with four of each. The OUT files are optional and not necessary for the game. AviatikD1.ini - the new one makes use of the extra LOD.AviatikD1_DATA.INI - The new one uses the new rigging and is slightly more compact than the original.Everything else is the same as in the Revision 2 download.

This version includes a new FM made by ojcar.
When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production of the Anatra DS was continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
The Anatra C.I was used mostly for training, but some were used for reconnaissance, as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
In version 2 - I have created a separate version for the Austrian plane, with a Schwarzlose machine gun and German bombs in the loadout. There are two Austrian skins, one with crosses painted over the Russian roundels, and one with standard insignia. (I have also included a postwar Yugoslav skin, because I like the insignia.) I have included my skinning templates for those who want make their own skins.
In version 3 - Ojcar has made a new FM for the plane. I have refined the wings and added some details. I created a new cockpit with German gauges and machine gun. I made two Austrian skins for the plane and I kept the Yugoslav skin, because I like the insignia. I have included my skinning templates for those who want make their own skins.
Historical Notes:
The serial numbers are fictitious. I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located.
Credits:
My thanks to Ojcar once again for making a new data.ini file for this plane.
Installation instructions:
This revision replaces previous versions. If you have an older version, please delete it, then install the new version.
For FE1: Unzip the file and move the folder named "AnatraC1" into the FirstEagles/Objects/Aircraft folder. 
For FE2: Unzip the file and move the folder named "AnatraC1" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AnatraC1". Move the folder named "D" from the Aircraft/AnatraC1 folder into the Decals/AnatraC1 folder you just made. 
 

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
OEF ALBATROS DII For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
Oeffag built Albatros DII
single SCHWARZLOSE machine gun
 
notes;;;
fm- player version (hard)
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The Airco DH9a, called the "Ninak" ("nine a") was introduced in June 1918 to replace the underpowered DH9. The 400hp Liberty engine required changes to the front of the fuselage, otherwise the plane was pretty much the same as the DH9. Although it was introduced late in the war, the DH9a did see service during the war, and was used extensively afterwards.
 
I have included two skins, a brown and an olive color. Both use the letter decals that come with First Eagles (which you can set in the loadout screen) and I have included a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads.
 
The skins are rather generic, I have included my skinning templates for those who wish to make better skins.
 
 
Credits
My thanks to Ojcar for once again making an excellent data file for the DH9a.
My thanks also to Sinbad for providing a great deal of resource information for this plane.
 
 
Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH9a" into the FirstEagles/Objects/Airplanes folder.
 
For FE2 - Unzip the file and move the folder named "AircoDH9a" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH9a". Move the folder named "D" from the Airplanes/AircoDH9a folder into the Decals/AircoDH9a folder you just made.
 
 
 
April 5, 2012 - Replaced data file with new version to fix problem with take offs and landings and making the plane fly better.

L63. A fictitious zeppelin for target practice. You can attempt to fly it if you wish, but don't start on the ground.

November-December 2007
 
Hanriot HD1 (Vickers MG in the middle)
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

Nieuport 24 v1.0
 
with 2 Vickers and own cockpit!
 
FM by TexMurphy
3D Models and textures by EmlD
 
To install extract the N24 folder to your
.../Aircrafts directory
 
Enjoy.
 
EmlD

Nieuport 28
Patch v 1.02
 
1.Cockpit added
2.Fuselage modeling edited
3.Made a couple mapping editions
 
Extract N28 folder to ../Aircrafts deirectory and overwrite
Dont forget to backup your additional skins
 
Enjoy
 
 
EmlD

The Airco D.H.5 was intended to be an improved version of the D.H.2, combining the power of a forward facing prop with the forward visibility of a pusher. The reverse stagger of the wings was an unusual configuration and the strange appearance of the plane may have contributed to false rumors of its bad performance. Although a slow climber, the D.H.5's strength and maneuverability made it excellent for ground attack and light bombing missions.
 
I have included two skins with decal ini's for both British and Australian markings. Both use the letter decals that come with First Eagles, which you can set in the Loadout screen. The British skin allows you to also set the squadron. (The Australians all used a white stripe on the tail instead of squadron markings.) I have included a set of serial numbers which will be applied randomly.
 
You can also choose a light bomb load in the Loadout screen.
 
Historical Notes
The serial numbers are fictious, but in the correct range for most D.H.5s.
 
Credits
My thanks to Ojcar for once again making an excellent data file for the D.H.5.
My thanks also to Nix for providing the realistic sound file for the Le Rhône engine.
 
 
Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH5". Move the folder named "D" from the Airplanes/AircoDH5 folder into the Decals/AircoDH5 folder you just made. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER EIV For FIRST EAGLES
 
revised model includes cockpit up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notice;;
gunproblem....Fixed thanks to "BWF"
 
other notes;;;11/04/07
revised model file and textures...
includes custom basic cockpit
 
 
other notes;
reversed rudder control on your system?;;;
open the FokkerEIV_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

Nieport 24bis v1.0
 
with 1 Vickers and own cockpit!
 
FM by TexMurphy
3D Models and textures by EmlD
 
To install extract the N24bis folder to your
.../Aircrafts directory
 
 
Enjoy.
 
EmlD

Fokker E.IIIa (two-gun variant of the E.III) Ver.1 14 May 2007
 
Model by by Andre (Laton) Simpson
Skins by v. Deutschmark
FM by peter01
 
Release pack also includes original bmp templates for anyone who wishes to make and distribute their own skins.
 
Check the Readme for installation instructions and any other notes

The French had three versions of the Strutter. The 1A2 for recon and artillery spotting, and two bombers, the 1B2, which carried a gunner, and the 1B1 which had only the pilot. The French prioritized delivery of the 1A2. The 1A2 Strutters, like the English 9400 series, had a fuel tank between the pilot and the observer. Consequently the 1A2 had greater range than the 1B2 and 1B1, which carried internal bomb bays in that same area.
 
France began building Strutters under license in April 1916 to replace obsolete Farmans and Caudron G-4s. As the first French built Strutters were tested ten months later in February 1917, a 1B2 Strutter broke up in mid air. The British insisted over stressing by the pilot caused the crash but the French demanded a total design review. The review resulted in few changes, but French built Strutters were not put into combat until the Spring of 1917, when they were significantly outclassed by enemy aircraft.
 
Bombing squadrons were routinely equipped with a mix of the 1B2 and 1B1 variants. and the 1B2 was often used to escort the 1B1. I find no evidence that the French mounted any external stores on the 1A2 or either of the 1B Strutters.
 
The French produced approximately 4,500 Strutters through April 1918. Some American units were provided with French built Strutters, which they intensely disliked, in part because they were initially delivered without weapons. All versions of the Strutter had air brakes on the inboard lower wings, which are not operational on the model; these brakes were often not favored by the aircrews because they created “mushy” handling. Many pictures of Strutters nosed over, perhaps document this characteristic.
 
The flight models attempt to reflect the known variations in the French aircraft.
 
The windscreens on French Strutters were different (some would say more graceful) than the British. That, unfortunately has not been modeled in this version. Dagaith, my original partner in this project left to join the army before the 1A2 model was started. Perhaps one day I will become sufficiently adept with 3dMax to make the adjustment, but that is not possible today. I'd love to have some help with that, if there is someone interested who can make 3dMax sing and dance.
 
 
 
We may eventually have a 1B1 Strutter, but, meanwhile there are production delays. . .
 
Thanks to Dagaith for the original model, Peter01 for the flight model, Laton for the additional LODs, , Gustav for conseils français, as well as beta testing by Southside Bucky (for the original English versions) Panama Red and Ojcar, who prompted me to get this bird out of the coop.
 
The included skin sets for the 1A2 depict aircraft flown by two French Escadrille, Sop 226, with silver dope and Sop 284, which operated 10 camo 1A2s from March 1918, the date the unit was formed, until the end of the war. Some sources incorrectly depict the Esc 226 aircraft in clear doped linen or light yellow dope, a mistake I made before discovering more recent and authoritative information. There are two files sets, on for FE2 and another for all previous versions of FE. Just drop them in and go.
 
 
 
 
sinbad 3 Nov 2010
 
 

This is a mod of the original Nieuport 11 to present:
 
Nieuport 16 C.1 110hp
Nieuport 16 C.1 130hp
Nieuport 16 RFC
Nieuport 16 C.1 Dual Lewis
Nieuport 16 C.1 Lewis Late
Nieuport 16 C.1 Vickers Late
 
thanks to :
 
MontyCZ and Texmurphy for the original Nieuport 11
Whiteknight06604 for the N17 with uper gun
peter01 for is flight model
 
instalation:
Recommend you back up your install first.
just drop in your main First Eagles directory
You will be prompted whether to overwrite files, confirm to overwrite
 
Any questions or comments
Combatace handle christian59
 
hope you will have good time with this fighter
 
 

Hope someone can make a better skin for Roland D.VIa