56 files
-
Geezer Austro-Hungarian pilots for FE2
Geezer Austro-Hugarian pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2
This pack presents some Austro-Hugarian Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find several options for Austro-Hugarian uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew1" with the historical pilots names (ex: Godwin Brumowski) or generic names such as AUSTRO-HUNGARIANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this Austro-Hugarian pilots skin Pack:
- 3 Austro-Hugarian Aces:
- Godwin Brumowski (Geezer wwiPilotNew5)
- Josef Kiss (Geezer wwiPilotNew5)
- Franz Graser (Geezer wwiPilotNew5)
- 4 Austro-Hugarian pilots with a generic face and several options for Austro-Hugarian uniforms and different scarf colors at your choice.
- AUSTRO-HUNGARIANPILOT1 (Geezer wwiPilotNew5)
- AUSTRO-HUNGARIANPILOT2 (Geezer wwiPilotNew8)
- AUSTRO-HUNGARIANPILOT3 (Geezer wwiPilotNew5)
- AUSTRO-HUNGARIANPILOT4 (Geezer wwiPilotNew6)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "AUSTRO-HUNGARIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (AUSTRO-HUNGARIAN PILOTS INSTALLATION README) with installation instructions for the majority of Austro-Hugarian aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (AviatikD1) Aircraft folder and find the "AviatikD1_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with AviatikD1
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=AUSTRO-HUNGARIANPILOT4 <------------------------------------ You must add this line
Position=0.00,-1.12,0.55 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Austro-Hugarian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew5), (wwiPilotNew6) & (wwiPilotNew8).
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
21 downloads
(0 reviews)0 comments
Submitted
-
Geezer French pilots for FE2
Geezer French pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some french Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
You will find several options for french uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew1" with the historical pilots names (ex: Jean Navarre) or generic names such as FRENCHPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this French pilots skin Pack:
- 6 French Aces:
- Georges Guynemer (Geezer wwiPilotNew5)
- René Fonck (Geezer wwiPilotNew5)
- Jean Navarre (Geezer wwiPilotNew5)
- Charles Nungesser (Geezer wwiPilotNew5)
- Michel Coiffard (Geezer wwiPilotNew5)
- Gabriel Guérin (Geezer wwiPilotNew5)
- 7 French pilots with a generic face and several options for french uniforms and different scarf colors at your choice.
- FRENCHPILOT1 (Geezer wwiPilotNew5)
- FRENCHPILOT2 (Geezer wwiPilotNew7)
- FRENCHPILOT3 (Geezer wwiPilotNew4)
- FRENCHPILOT4 (Geezer wwiPilotNew4)
- FRENCHPILOT5 (Geezer wwiPilotNew4)
- FRENCHPILOT6 (Geezer wwiPilotNew5)
- FRENCHPILOT7 (Geezer wwiPilotNew8)
- 3 French Aces: Georges Guynemer, Michel Coiffard & Charles Nungesser, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to french service colors.
- wwiPilotNew16 - Charles Nungesser - (Geezer wwiPilotNew1)
- wwiPilotNew27 - Michel Coiffard - (Geezer wwiPilotNew1)
- wwiPilotNew32 - Georges Guynemer - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "FRENCH PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (FRENCH PILOTS INSTALLATION README) with installation instructions for the majority of French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (Breguet14_FRANCE) Aircraft folder and find the "Breguet14_FRANCE_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with Breguet14_FRANCE
// Crew -----------------------
[Pilot]
PilotModelName=FRENCHPILOT2 <------------------------------------ You must add this line
Position=0.0,-1.07,0.88 <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for French pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
35 downloads
(0 reviews)0 comments
Submitted
-
Geezer Germans pilots for FE2
Geezer German pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2
This pack presents some German Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find several options for German uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew2", "wwiPilotNew3", "wwiPilotNew5", "wwiPilotNew6", "wwiPilotNew7" and "wwiPilotNew8", with the historical pilots names (ex: Kurt Wolff) or generic names such as GERMANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this German pilots skin Pack:
- 13 Germans Aces:
- Ernst Udet (Geezer wwiPilotNew5)
- Josef Jacobs (Geezer wwiPilotNew5)
- Josef Mai (Geezer wwiPilotNew5)
- Julius Buckler (Geezer wwiPilotNew5)
- Kurt Wolff (Geezer wwiPilotNew5)
- Kurt Wusthoff (Geezer wwiPilotNew5)
- Max Immelman (Geezer wwiPilotNew5)
- Oswald Boelcke (Geezer wwiPilotNew5)
- Otto Parchau (Geezer wwiPilotNew5)
- Paul Baumer (Geezer wwiPilotNew5)
- von Richthofen (Geezer wwiPilotNew5)
- von Schleich (Geezer wwiPilotNew5)
- Werner Voss (Geezer wwiPilotNew5)
- 4 fictional characters from films:
- Black Falcon (from Fly Boys film) (Geezer wwiPilotNew5)
- Bruno Stachel (from Blue Max film) (Geezer wwiPilotNew5)
- Willi von Klugermann (from Blue Max film) (Geezer wwiPilotNew5)
- Ernst Kessler (from The Great Waldo Pepper film) (Geezer wwiPilotNew5)
- 10 German Aces using a British long leather coat (Geezer wwiPilotNew1) that I adapted to German service colors.
- Josef Mai 2 (wwiPilotNew1)
- Julius Buckler 2 (wwiPilotNew1)
- Kurt Wolff 2 (wwiPilotNew1)
- Kurt Wusthoff 2 (wwiPilotNew1)
- Max Immelman 2 (wwiPilotNew1)
- Oswald Boelcke 2 (wwiPilotNew1)
- Paul Baumer 2 (wwiPilotNew1)
- von Richthofen 2 (wwiPilotNew1)
- von Schleich 2 (wwiPilotNew1)
- von Schleich 3 (wwiPilotNew1)
- 1 fictive character using a British long leather coat (Geezer wwiPilotNew1) that I adapted to German service colors.
- Bruno Stachel 2 (wwiPilotNew1)
- 6 Germans pilots with generic face and several options for different scarf colors & a German uniform at your choice.
- GERMANPILOT1 (Geezer wwiPilotNew6)
- GERMANPILOT2 (Geezer wwiPilotNew6)
- GERMANPILOT3 (Geezer wwiPilotNew7)
- GERMANPILOT4 (Geezer wwiPilotNew8)
- GERMANPILOT5 (Geezer wwiPilotNew2)
- GERMANPILOT6 (Geezer wwiPilotNew3)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "GERMAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (GERMAN PILOTS INSTALLATION README) with installation instructions for the majority of German aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (FokkerDr1) Aircraft folder and find the "FokkerDr1_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with FokkerDr1
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=von Richthofen <------------------------------------ You must add this line
Position=0.00,-0.75,0.65 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for German pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew2), (wwiPilotNew3), (wwiPilotNew5), (wwiPilotNew6), (wwiPilotNew7) & (wwiPilotNew8).
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
34 downloads
(0 reviews)0 comments
Updated
-
Geezer Italian pilots for FE2
Geezer italian pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some italian Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
You will find several options for italian uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew3" with the historical pilots names (ex: Ernesto Cabruna) or generic names such as ITALIANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this italian pilots skin Pack:
- 4 Italian Aces:
- Ernesto Cabruna (Geezer wwiPilotNew5)
- Francesco Baracca (Geezer wwiPilotNew5)
- Giovanni Ancillotto (Geezer wwiPilotNew5)
- Giovanni Nicelli (Geezer wwiPilotNew5)
- 10 Italian pilots with a generic face and several options for italian uniforms and different scarf colors at your choice.
- ITALIANPILOT1 (Geezer wwiPilotNew7)
- ITALIANPILOT2 (Geezer wwiPilotNew5)
- ITALIANPILOT3 (Geezer wwiPilotNew5)
- ITALIANPILOT4 (Geezer wwiPilotNew5)
- ITALIANPILOT5 (Geezer wwiPilotNew4)
- ITALIANPILOT6 (Geezer wwiPilotNew4)
- ITALIANPILOT7 (Geezer wwiPilotNew7)
- ITALIANPILOT8 (Geezer wwiPilotNew8)
- ITALIANPILOT9 (Geezer wwiPilotNew4)
- ITALIANPILOT10 (Geezer wwiPilotNew3)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "ITALIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (ITALIAN PILOTS INSTALLATION README) with installation instructions for the majority of ITALIAN French & British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SVA5) Aircraft folder and find the "SVA5_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with To use with SVA5
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=ITALIANPILOT2 <------------------------------------ You must add this line
Position=0.0,-0.60,0.55 <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Italian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
22 downloads
(0 reviews)0 comments
Updated
-
Geezer RFC-RAF pilots for FE2
Geezer RFC-RAF pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some RFC-RAF Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find several options for different scarf colors and a RFC-RAF uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew2", "wwiPilotNew3", "wwiPilotNew4", "wwiPilotNew5", "wwiPilotNew7" and wwiPilotNew8 with the historical pilots names (ex: Albert Ball) or generic names such as RFC-RAF PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this RFC-RAF pilots skin Pack:
- 7 RFC-RAF Aces:
- Albert Ball (Geezer wwiPilotNew5)
- Arthur Rhys-Davids (Geezer wwiPilotNew5)
- Cecil Arthur Lewis (Geezer wwiPilotNew5)
- Edward Mannock (Geezer wwiPilotNew5)
- James McCudden (Geezer wwiPilotNew5)
- Lanoe Hawker (Geezer wwiPilotNew5)
- William Barker (Geezer wwiPilotNew5)
- 1 Knowed pilot without the Ace status:
- Alan Bishop Jarvis (Geezer wwiPilotNew5)
- 7 RFC-RAF pilots with a generic face and several options for different scarf colors and a RFC-RAF uniform at your choice.
- RFC-RAF PILOT1 (Geezer wwiPilotNew5)
- RFC-RAF PILOT2 (Geezer wwiPilotNew1)
- RFC-RAF PILOT3 (Geezer wwiPilotNew2)
- RFC-RAF PILOT4 (Geezer wwiPilotNew3)
- RFC-RAF PILOT5 (Geezer wwiPilotNew4)
- RFC-RAF PILOT6 (Geezer wwiPilotNew8)
- RFC-RAF PILOT7 (Geezer wwiPilotNew7)
- 7 RFC-RAF pilots: James McCudden, Lanoe Hawker, Albert Ball, Arthur Rhys-Davids, Cecil Arthur Lewis, Alan Bishop Jarvis and Edward Mannock, using a British long leather coat (Geezer wwiPilotNew1).
- wwiPilotNew15 - James McCudden - (Geezer wwiPilotNew1)
- wwiPilotNew17 - Lanoe Hawker - (Geezer wwiPilotNew1)
- wwiPilotNew19 - Albert Ball - (Geezer wwiPilotNew1)
- wwiPilotNew26 - Arthur Rhys-Davids - (Geezer wwiPilotNew1)
- wwiPilotNew29 - Cecil Arthur Lewis - (Geezer wwiPilotNew1)
- wwiPilotNew30 - Alan Bishop Jarvis - (Geezer wwiPilotNew1)
- wwiPilotNew35 - Edward Mannock - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RFC-RAF PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (RFC-RAF PILOTS INSTALLATION README) with installation instructions for the majority of British & French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your ( SE5a ) Aircraft folder and find the "SE5a_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with SE5a
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=James McCudden <------------------------------------ You must add this line
Position=0.0,-1.150,0.699 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for RFC-RAF pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew2), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
39 downloads
(0 reviews)0 comments
Submitted
-
Geezer RNAS-RAF pilots for FE2
Geezer RNAS-RAF pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some RNAS-RAF Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find several options for different scarf colors and a RNAS-RAF uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew3", "wwiPilotNew4", "wwiPilotNew5", "wwiPilotNew7" and wwiPilotNew8 with the historical pilots names (ex: Robert Little) or generic names such as RNAS-RAF PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this RNAS-RAF pilots skin Pack:
- 6 RNAS-RAF Aces:
- Arthur Roy Brown (Geezer wwiPilotNew5)
- Bruno De Roeper (Geezer wwiPilotNew5)
- Geoffrey Siedle (Geezer wwiPilotNew5)
- Lawrence Coombes (Geezer wwiPilotNew5)
- Raymond Collishaw (Geezer wwiPilotNew5)
- Robert Little (Geezer wwiPilotNew5)
- 1 Knowed pilot without the Ace status:
- Colin MacLaren (Geezer wwiPilotNew5)
- 6 RNAS-RAF pilots with a generic face and several options for different scarf colors and a RNAS-RAF uniform at your choice.
- RNAS-RAF PILOT1 (Geezer wwiPilotNew1)
- RNAS-RAF PILOT2 (Geezer wwiPilotNew4)
- RNAS-RAF PILOT3 (Geezer wwiPilotNew7)
- RNAS-RAF PILOT4 (Geezer wwiPilotNew8)
- RNAS-RAF PILOT5 (Geezer wwiPilotNew5)
- RNAS-RAF PILOT6 (Geezer wwiPilotNew3)
- 4 RNAS-RAF pilots: Geoffrey Siedle, Colin MacLaren, Arthur Roy Brown & Robert Little, using a British long leather coat (Geezer wwiPilotNew1).
- wwiPilotNew18 - Geoffrey Siedle - (Geezer wwiPilotNew1)
- wwiPilotNew20 - Colin MacLaren - (Geezer wwiPilotNew1)
- wwiPilotNew23 - Arthur Roy Brown - (Geezer wwiPilotNew1)
- wwiPilotNew24 - Robert Little - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RNAS-RAF PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (RNAS-RAF PILOTS INSTALLATION README) with installation instructions for the majority of British & French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Arthur Roy Brown <------------------------------------ You must add this line
Position=0.00,-0.20,0.75 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for RNAS-RAF pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
29 downloads
(0 reviews)0 comments
Updated
-
Geezer Russian pilots for FE2
Geezer Russian pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents the Ukrainian/Russian Ace Alexander Kozakov and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find different options for scarf colors at your choice. The Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this Russian pilots skin Pack:
- 1 Ukrainian/Russian Ace:
- Alexander Kozakov (Geezer wwiPilotNew5)
- 3 Russian pilots with a generic face and different scarf colors at your choice.
- RUSSIANPILOT1 (Geezer wwiPilotNew6)
- RUSSIANPILOT2 (Geezer wwiPilotNew7)
- RUSSIANPILOT3 (Geezer wwiPilotNew8)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RUSSIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (RUSSIAN PILOTS INSTALLATION README) with installation instructions for the majority of Russian aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Alexander Kozakov <------------------------------------ You must add this line
Position=0.00,-0.20,0.75 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Russian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew5), (wwiPilotNew6) & (wwiPilotNew8).
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
27 downloads
-
Geezer United States pilots for FE2
Geezer United States pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some United States Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
You will find several options for different scarf colors and a United States uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8", "wwiPilotNew3" and "wwiPilotNew1" with the historical pilots names (ex: Frank Luke) or generic names such as US-PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this United States pilots skin Pack:
- 5 United States Aces:
- Douglas Campbell (Geezer wwiPilotNew5)
- Edward Rikenbacker (Geezer wwiPilotNew5)
- Frank Luke (Geezer wwiPilotNew5)
- Lawrence Callahan (Geezer wwiPilotNew5)
- Raoul Lufbery (Geezer wwiPilotNew5)
- 2 Knowed pilots whithout the Ace status:
- William Palmer (Geezer wwiPilotNew5)
- William Wellman (Geezer wwiPilotNew5)
- 3 United States pilots: Edward Rikenbacker, Frank Luke & William Wellman, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to United States service & french service colors.
- wwiPilotNew13 - Edward Rikenbacker (Geezer wwiPilotNew1)
- wwiPilotNew14 - Frank Luke (Geezer wwiPilotNew1)
- wwiPilotNew28 - William Wellman (Geezer wwiPilotNew1)
- 5 United States pilots with a generic face and several options for different scarf colors and a United States uniform at your choice.
- US-PILOT1 (Geezer wwiPilotNew5)
- US-PILOT2 (Geezer wwiPilotNew3)
- US-PILOT3 (Geezer wwiPilotNew4)
- US-PILOT4 (Geezer wwiPilotNew8)
- US-PILOT5 (Geezer wwiPilotNew7)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "UNITED STATES PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (UNITED STATES PILOTS INSTALLATION README) with installation instructions for the majority of United States, French and British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SPAD13_220) Aircraft folder and find the "SPAD13_220_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with SPAD13_220
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Edward Rikenbacker <------------------------------------ You must add this line
Position=0.00,-0.85,0.62 <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for United States pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
23 downloads
(0 reviews)0 comments
Updated
-
German pilot Skin pack textures
German pilot Skin pack textures (GerHelmetPilot) & (GerScarfPilot) for FE2, Gold and FE1.
This is a pack with new textures (Max Immelmann face), for Stephen1918's "GerHelmetPilot" and "GerScarfPilot", to be used in First Eagles 2, First Eagles Gold edition and First Eagles 1.
-There is two (2) options for "GerHelmetPilot" texture bmp just with different scarfs at your choice. To use the other, you must to rename it to "GerHelmetPilot".
-There is four (4) options "GerScarfPilot" texture bmp just with different scarfs at your choice. To use those, you must to rename anyone that you select to "GerHelmetPilot".
I'm Including as well JPG files for players that are using Hexaedited .LODs pointing to JPG format (This is only to FE2 users).
_________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR GerHelmetPilot:
*First make a back-up of your "GerHelmetPilot" Folder, just in case.
Copy or drop the "GerHelmetPilot.bmp" file in your game "GerHelmetPilot" folder.
_________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR GerScarfPilot:
*First make a back-up of your "GerScarfPilot" Folder, just in case.
Copy or drop the "GerHelmetPilot.bmp" file in your game "GerScarfPilot" folder.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira pilot texture.
- Thanks to Stephen1918 for the great GerHelmetPilot & GerScarfPilot 3D.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
41 downloads
-
GISTAND FE effects_enhancements Ver 1
By Guest
FE effects enhancements!......I Wanted more EFFECTS in this Fantastic WWI SIMS!!!!
1,138 downloads
(5 reviews)0 comments
Updated
-
Heck Mitchell's WW1 Poor Bloody Infantry Mod
By Heck
I've gotten permission from Kesselbrut to post a version of his WW2 infantry for use in First Eagles. Here's the laundry list of odd things:
1. They're WW2 lods, so one man in each squad has a bazooka that fires as a rifle.
2. All squads, French, British, German, and American, have lods that show a tripod mounted Browning type 30 cal machine gun, although each different nationality is armed with a machine gun from the gun data ini: French, Hotchkiss; Germans, Maxims; British, Vickers; and Americans, Colt-Brownings.
3. I had to increase the rifleman's rate of fire to 30 rpm just to get the little peckerwoods to fire at all.
4. I changed the French uniform color to as close to Horizon Blue as my color blind eyes would let me, but now the Frenchman are a little pasty, and seem to have a mild sunburn. I am not a graphic artist.
5. Although I've changed the data ini weapons and detection systems to say AIR_AND_GROUND, the little jerks still just fire at each other, and I don't know why, although it might be that because of the range at which they start they are already engaged with opposing forces. This mod will give you infantry squads blazing away at each other in single missions (Army Co-operation), especially if you change the data inis of your tanks to RARE, and VERY_RARE, availabilities. And, like me, you might enjoy running the little buggers down with your prop and landing gear.
Just put the folders into your ground object folder and the GUNDATA.INI into your object folder and it will work. Hopefully someone will make some real WW1 infantry.
831 downloads
(2 reviews)0 comments
Submitted
-
Industrial Objects
By Geezer
This pack contains a variety of large, medium, and small industrial objects - plus two urban housing blocks. They were originally developed at the request of FE map makers so their appearance is typical of WW1. Wrench then pointed out that they could also be used for other maps - 1930s, WW2, and even parts of the Cold War. A modest selection of complimentary 1930s civilian vehicles is in development, and will be added in the future.
THESE MODELS ARE ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL THEY BE USED, EVEN IN PART, OF ANYTHING THAT IS PAYWARE, IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT.
173 downloads
-
Infantry Units
By Stephen1918
I have created 10 new infantry units for First Eagles. They are all pretty much identical except for their helmets and uniform colors. Each unit is a five man squad (three riflemen and two runners.) The units will move around and the riflemen will aim and fire independently.
I have created a dust effect for when they are moving and I've created a gunshot sound for their rifles. The rifles are based on Peter01's rifle data, with my sound effect and a few other minor changes. All the Entente units use the Lee Enfield rifle, and all the Central units use the Mauser.
This download includes infantry units for: Britain, France, Germany, Italy, Austria, Belgium, Russia, America, Australia, and Turkey.
I couldn't bring myself to kill the poor guys, so they just disappear when they get shot.
Credits
My thanks to Heck and Geo for leading the way!
Thanks also to Peter01 for his original rifle data files.
Installation Instructions
Unzip the file and copy the units you want from my GroundObjects folder into your FirstEagles/Objects/GroundObjects folder. Copy the sound file "InfantryRifle.wav" from my Sounds folder into your FirstEagles/Sounds folder. Copy the dust effect "RunningInfantryEmitter.ini" from my Effects folder into your FirstEagles/Effects folder.
Follow the instructions for installing the guns and sound in the two other instruction files included with the download.
514 downloads
(4 reviews)0 comments
Updated
-
Longer Flyby View.
(S!) ALL hi ;-)
New Flyby & Chase views for FE!!!
Thread at CA Flyby & Chase views for FE!!!
The link;
http://forum.combatace.com/index.php?showt...amp;#entry87633
So what we have here is;
1 - Longer Flyby view with zoom in & out.
2 – Chase view F6 that stays where you put it & zoom in & out.
To install; go to your ( FLIGHT FOLDER ) put this Viewlist ini in your flight folder
It will ( NOT ) overwrite anything!, now go try it and have fun ;-)
If you don’t like it just delete the file and your back to normal again.
Enjoy… ;-)
your friend in the FE sky
v. Deutschmark
221 downloads
(3 reviews)0 comments
Submitted
-
MGAA Pit
By Tailspin
This is a mod to add sandbag pits to the AAMG gunners provided in both my AAMG mod and the Bridges for Verdun mod. This will work for both the original and Expansion Pack 1 versions of First Eagles. Please read and follow the enclosed read-me. I apologize in advance for the lengthy installation method but I cannot think of a way to do this without re-writing (and thus "breaking") any mods you may alread have done to your Targets .ini.
If you have any problems please contact me at CombatACE.com and I will help you out.
Have fun,
TS
A BIG THANKS to geo of www.geos-aircraft.com for providing the 3d model and the original skin, which I used as a basis for the one provided.
NO PAYWARE!!!
398 downloads
(0 reviews)0 comments
Updated
-
New formation for Attack aircraft
By quack74
This will show you how to create a new formation for all of your attack aircraft. It will create three Squads with six elements per flight. They will appear to be in somewhat of a Vee formation with slight differences in altitude from one another. This works for FEG and FE2.
Enjoy, Quack74
152 downloads
(2 reviews)0 comments
Submitted
-
New Formations
By quack74
This is my "Formation.ini" file for First Eagles Gold install. For FE2
look in the CombatAce.com First Eagles forums for help
It has three altered formation versions.
1. "Fighter" -- Used for German fighter and attack aircraft.
"Vee" flight formation with "Vee" Squadron formation.
2. "Fighter2" - Used for Allied fighters and attack aircraft.
"Echelon Left" flight formation with box like Squadron formation.
3. "Bomber" - I changed the spread of each flight of three. More space between.
Each flight is in a "Vee" formation with a slight altitude difference with each aircraft.
I included pics of each formation so you can see what I have described above.
A Readme file is also inside.
Enjoy, quack74
356 downloads
(0 reviews)0 comments
Submitted
-
New Pilots for First Eagles
By Jan Tuma
New Pilot repaint for First Eagles created by Jan (Honza) Tuma.
To install:
Drop the wwiPilotNew*.bmp into your Aircraft folder. (Default C:\Program Files\ThirdWire\WWI\Objects\Aircraft)
Jan
24.7.2009
460 downloads
-
Pfalz markings and Staaken formations
By quack74
This is a bit much I know. But if you like the Pfalz D.III types then this will be good for you. I've created a way to utilize the game generated National marking system (with marking changes for the Germans in March 1918) while using new "Pfalz" markings without the white boarders (for some Jasta's anyway).
I had to create new "Nations" for each Pfalz Jasta that uses different markings. Ex: Plain Silver Grey will use the "Germany_Pfalz" nation which will create black iron crosses (no white boarders). And for instance Jasta 77b will use the "Gemany_Pfalz_Lozenge_White" nation which will have white boarders on the wings but not on the fuselage and tail. All in all I think I made 4 new "Nations" for the Pfalz. You have to use the new decals that are in my "Decals" folder for this to work. Drop them into your "Decals" folder.
It just sounds complicated.... because it was :)
Anyway I've included folders with all the files you'll need. Really all it is is a copy and paste task for you. Just follow the folder structure thats in my download and follow the readme files. Ex: Create the new "Nations" folder. And put the new "Nations.ini" into it. Thats all.
*** Staaken & HP400 Formation ***
I've also created a "WWI_AIRFIELD1.ini" for the Staakens and HP400.
Their wingspan is too big to use the GothaGIV formations that I posted at CombatAce. I've created a new "Nation" for the Staaken called "Germany_Bombers" for the Staaken only. And I also created a new "RAF_Bombers" nation for the HP400. In the HP 400 and Staaken's DATA.ini and each of their skins' "TextureSet" the nation name should be changed from "Germany" to "Germany_Bombers" or "RAF" to "RAF_Bombers". This way the game will find the new formation setup (thats included in this download), for these particular bombers.
Enjoy, quack74
Edit: 9/11/10:
I added an "Italy2" to the Nations.ini and the Decals folder. It will make Italian markings with a green outer and red inner roundel. Any aircraft you want to use for ITALY just change the texture folder's TextureSet.ini to Nation=ITALY2. Now you have two Italian markings.
135 downloads
(1 review)0 comments
Updated
-
Polish-Russian War - Ford FT-B
By Stephen1918
The Ford FT-B (also know as the Ford Tf-c) was a Polish armored car built in Warsaw in 1920. It was built on a Model-T chassis using steel plate left by the Germans. The FT-B had a crew of two and was armed with a single Maxim machine gun in a rotating turret. It had a relatively high speed and a long range. Because it was light weight and easy to maneuver it was an effective fighter, and the Ford's small profile made it difficult to hit.
My Ford FT-B has a four color camo skin. I've made high and low poly LODs as well as a destroyed version. I backdated the data file to before the Polish-Russian War so the car can be used throughout; you can change the Service Start Date to June of 1920 if you want greater accuracy.
In First Eagles, the the Ford FT-B takes the role of a tank. Drop it into your ground object folder and First Eagles will randomly assign it to some of your Army Co-operation missions.
Installation Instructions
For both FE and FE2 - Unzip the file and open my "GroundObject" folder. Copy the folder named "FordFTB" and the file named "FTBDest.bmp" into your FirstEagles/Objects/GroundObject folder. Note that the "FTBDest.bmp" file should not be inside any other folder.
39 downloads
(0 reviews)0 comments
Updated
-
Polish-Russian War - Russian Tachanka
By Stephen1918
A tachanka was a horse drawn wagon or cart with a heavy machine gun mounted on the back. This made it possible to deploy machine guns quickly, especially on the wide, rapidly changing, Eastern Front. It was used by Russian cavalry in WWI and by Bolshevik, White Russian, Ukrainian, and Polish cavalry in the Russian Civil Wars. Germany used a similar vehicle on the Eastern Front during WWI.
My tachanka is a troika (three horse carriage) with a Vickers machine gun facing the rear. It functions in First Eagles as a Truck; drop it into your Ground Objects folder and First Eagles will assign it to some of your Armed Reconnaissance missions. The machine gun is set for AA and will fire at enemy planes that come within its field of fire.
The download includes three LODs and a destroyed version.
My thanks to Gepard for suggesting this interesting vehicle.
Installation Instructions
For both FE1 and FE2
Unzip the file and open my "GroundObject" folder. Copy the folder named "Tachanka" to your FirstEagles/Objects/GroundObject folder. Then copy the file named "TachankaDestroyed.bmp" into your GroundObject folder. Note that the "TachankaDestroyed.bmp" file should not be inside any other folder.
45 downloads
-
Schneider CA1
By Stephen1918
The Schneider CA1 was the first French built tank and was used for the first time in April, 1917. Only about 400 were built but they played an important role on the Western Front in late 1917 and early 1918. The Schneider had a short barreled 75mm gun in a turret on the front-right, and two Hotchkiss machine guns in turrets on the sides.
The tank was delivered from the factory painted grey, but a variety of camo schemes were applied in the field. My version includes both a standard grey and a four color camo skin. (You will need to change the ini file in order to change skins - open the ini file and change the TextureSet numbers to make the desired skin number 1.)
In First Eagles, the Schneider takes the role of a tank, drop it into your ground object folder and First Eagles will randomly assign it to some of your Army Co-operation missions.
Installation Instructions
Unzip the file and open my folder named "GroundObject". Copy the folder named "SchneiderCA" to your FirstEagles/Objects/GroundObject folder. The Schneider uses the same skin for damage as my armored cars. If you have already installed any of my armored cars, you may already have the file. If not, copy the file named "DestroyedArmoredCar.bmp" into your GroundObject folder. Note that the "DestroyedArmoredCar.bmp" file should not be inside any other folder.
161 downloads
-
Smoke effects
By Laton
This is a small effects pack to give First Eagles more intersting and longer lasting
smoke from damaged aircraft. The effects 'fill in' entries left empty in the release version
of the game.
To install, extract the files into your \Effects folder.
A quick thank you to Deuces for pointing me in the right direction on making these.
Have fun.
713 downloads
(3 reviews)0 comments
Updated
-
Smoke Effects Pack V2
By Laton
Pack Updated - Please ensure the readme files says Version 2A in the top line.
Smoke Effects Pack
New effects for:
General aircraft damage (pale grey smoke)
Aircraft fires (some flames - black/grey smoke)
Engine fire (small flames, brown/black smoke)
Fuel fires (intense, long flames & thick black smoke)
To install, extract the files into your \Effects folder.
Have fun.
1,434 downloads
(3 reviews)0 comments
Updated
-
Trucks for First Eagles
By Stephen1918
I have made two generic trucks for First Eagles. Both have cabs, so it isn't so obvious that they don't have drivers when you see them from the air.
The Russian Truck is loosely based on the Russian Garford-Putilov but is similar to the WFD and the Jeffrey. It had a high ground clearance and the engine was in the middle, under the bed, which made it good for driving on poor roads.
The Austrian Truck is loosely based on the German Daimler-Marienfelde but is similar to many other trucks of the era.
I have provided alternate skins, an olive color for the Russian, and a tan color for the Austrian, so you can convert them to use for other nations if you want.
Installation Instructions
You can install the trucks individually or both together. Unzip the file and move the folders you want into the FirstEagles/Objects/GroundObjects folder.
273 downloads
-
Download Statistics
14,206
Files12,483
Comments26,857
Reviews