Jump to content

Spad Skins

Sign in to follow this  

Spad Skins for all Versions

48 files

  1. SPAD XIII 138th Aero Sq

    SPAD XIII C1. for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Former "Flag Bus" as was Flown by Major Maxwell Kirby commander of 5th Pursuit Group.Germany, Koblenz late, 1919.
    Major Maxwell Kirby achieved his sole victory, when serving with the 94th Aero squadron.
    When the 94th was returned to the United States, their aircraft went to the 138th AS while still wearing the "showbirds" colours. However the squadron insignia was removed by the pilots of the 94th, and this was replaced with that of the 138th. The emblem of the 138th was the "Charging Ram" within the 'V' signifying the FIFTH PURSUIT GROUP. The 138th Ultimately returned to the USA and disbanded in August-September 1919.
    Many of these aircraft then had a further lease on life then they were transferred to the new Polish Air Service.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "138th Aero Squadron" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "138th Aero Squadron" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=138th Aero Squadron
    Name=138th Aero Squadron
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    22 downloads

       (1 review)

    0 comments

    Submitted

  2. SPAD XIII Flag Bus

    SPAD XIII C1. "Flag Bus" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Captain Reed Chambers of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Captain Reed Chambers achieved 7 confirmed victories in WW1, flying with 94th Aero Squadron. 
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Flag Bus" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Flag Bus" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Flag Bus" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Flag Bus
    Name=Flag Bus
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    16 downloads

       (1 review)

    0 comments

    Submitted

  3. SPAD XIII Barber Pole

    SPAD XIII C1. "Barber Pole" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1 
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Dudley "Red" Outcalt of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Barber Pole" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    This Aircraft flew probablly with Marlin guns, and not with Vickers.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Barber Pole" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Barber Pole" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Barber Pole
    Name=Barber Pole
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000 
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    known issues:
    Painting the stripes in spirals was a problem because at the end of the tail's aircraft, there is a distortion that pulls all the lines back. I connected the stripes with each other as far as was possible; so you may notice imperfections in the bottom side. 
    ________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    18 downloads

       (1 review)

    0 comments

    Submitted

  4. SPAD XIII Little Joe

    SPAD XIII C1. "Little Joe" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Leo H. "Joe" Dawson of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lt. Leo Dawson achieved 4 victories in WW1, flying with 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Little Joe" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    This Aircraft flew probablly with Marlin guns, and not with Vickers.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Little Joe" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Little Joe" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Little Joe
    Name=Little Joe
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    I'm adding another (SPAD13_001.bmp) with the front bottom, painted in full green colour as an option.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    18 downloads

       (1 review)

    0 comments

    Submitted

  5. SPAD XIII Zig-Zag

    SPAD XIII C1. "Zig-Zag" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Ben "Casey" Jones of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Zig-Zag" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Zig-Zag" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Zig-Zag" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Zig Zag
    Name=Zig Zag
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    19 downloads

       (1 review)

    0 comments

    Submitted

  6. SPAD XIII Checkerboard

    SPAD XIII C1. "Checkerboard" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1 
    Historical notes:
    This skin depict the SPAD XIII C1. flown by Lieutenant Robert W. Donaldson of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919. Lt. Robert W. Donaldson achieved one shared victory in WW1, flying with the 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Checkerboard" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Checkerboard" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Checkerboard" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Checkerboard
    Name=Checkerboard
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.

    I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

     

    20 downloads

       (1 review)

    0 comments

    Submitted

  7. SPAD XIII Diamond Dick

    SPAD XIII C1. "Diamond Dick" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant William H. Palmer of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lt. William W. Palmer achieved 3 victories in WW1, flying with the 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Diamond Dick" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Diamond Dick" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Diamond Dick" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Diamond Dick
    Name=Diamond Dick
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    I'm adding one optional (SPAD13_001.bmp) with a red star painted on the wheels.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

    26 downloads

       (2 reviews)

    0 comments

    Submitted

  8. SPAD XIII Lightning Bolt

    SPAD XIII C1. "Lightning Bolt" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Harvey Weir Cook of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lieutenant Harvey Weir Cook achived 7 confirmed victories in WW1, flying with 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Lightning Bolt" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Lightning Bolt" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Lightning Bolt" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Lightning Bolt
    Name=Lightning Bolt
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000 
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

    21 downloads

       (2 reviews)

    0 comments

    Submitted

  9. SPAD XIII Easter Egg

    SPAD XIII C1. "Easter Egg" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Samuel Kaye of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lieutenant Samuel Kaye achieved 4 victories in WW1, flying with the 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Easter Egg" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Easter Egg" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Easter Egg" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Easter Egg
    Name=Easter Egg
    Nation=USAS
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

    19 downloads

       (2 reviews)

    0 comments

    Submitted

  10. SPAD XIII Sunbeam

    SPAD XIII C1. "Sumbeam" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant John Jeffers of 94th Aero Squadron. Ft. Alexander, Koblenz, Germany. April of 1919.
    Lt. John Jeffers achieved 2 victories in WW1, flying with 94th Aero Squadron. 
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Sumbeam" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Sumbeam" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Sumbeam" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Sunbeam
    Name=Sunbeam
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 
     

     

    24 downloads

       (2 reviews)

    0 comments

    Submitted

  11. Castillac SPAD XII

    Hi
     
    and now something completely different!
     
    Taken out of a comic strip (btw, highly recomendet ->
    ). 
    A rather special skin for the SPAD XII (the one with the cannon, which can be found here on combatace).
     
    Installation:
    - Drop whole folder 'Edelweiss' in the SPAD_XII folder (..\objects\Aircraft\SPAD_XII)
    - Add the lines below into your SPAD_XII.ini at the bottom, of course change the XXX to the next number
     
    [TextureSetXXX] <-- Change number
    Directory=Edelweiss
    Name=Castillac
    Nation=FRANCE
    Squadron=unknown
    Specular=0.400000
    Glossiness=0.300000
    Reflection=0.100000
     
     
    cheers
    gterl

    81 downloads

       (1 review)

    0 comments

    Submitted

  12. Flyable Spad 7 IRAS Skin Set

    Flyable Spad 7 for Eastern Front Campaign & FE2
     
    This is a skin set and data/ini file mod to permit the stock Fe2 Spad 7 to be a flyable plane, using the TW quality LOD's and bump maps of the FE2 Spad 7. The only Spad 13 piece is the stock Spad 13 cockpit with minor adjustments. There are several skin sets for various IRAS units, including two of the leading aces, Kazakov and Smirnoff. The skins are a joint effort with Stephen1918. I could not do the Beta testing without doing skins! The FM is entirely my fault, a revised Peter01 FM, with adjustments for Russian service, but it could also be used for other nations. The Leprieur rockets are not part of the loadout packages, as I saw no reports of the Russians using them on the Spad 7. Only the 150 HP FM is included because that is the version used by the Russians (there were very few of the others, even in France). The original files are included in case you want to revert to them without expanding the entire Fe2 fileset.
     
    I have not tested this mod in any version other than Fe2, but I see no reason why the skins and cockpit mod should not work in the various forms of FE1, provided you tinker a bit. You may or may not have to delete the bump maps.
     
    IMHO the Jones Soft Mode enabler is the way to get this and other mods in and out of the game, but you can certainly do it all manually if you prefer.
     
    There are also hangar and loading screens (apologies to Frank Luke) to help with immersion in Stephen1918s excellent Eastern Front Campaign.
     
    Enjoy.

    140 downloads

       (0 reviews)

    0 comments

    Updated

  13. Updated Spad 7 serial decals

    My thanks to Panama Red for pointing out a placement problem with my Spad 7 tail decals. This is the corrected version. See the readme for complete installation instructions.

    103 downloads

       (0 reviews)

    0 comments

    Submitted

  14. Spad 7 Serial decals

    These are some serial numbers that I created for one of my favorite planes; the Spad 7. Both 150hp and 180hp versions are included. As a bonus, I've included a couple of .png files for creating decals, one for Spads, the other for Belgian Camel serials. A readme with full installation instructions is included. I hope you enjoy.
     
    Heck

    64 downloads

       (0 reviews)

    0 comments

    Submitted

  15. RFC SPAD VII with Lewis gun

    Nothing fancy just extra firepower.

    166 downloads

       (2 reviews)

    0 comments

    Submitted

  16. Spad VII Skins and Misc

    Little Spad VII hop up
     
     
    Cockpit.ini and Spad7_180.ini
    Hanger Screen
    Widescreen and normal loading Screen
    Default tan textureset (replacement for stock if you wish)
    Escadrille 103 (Les Cigones) textureset and decals (Tan)
    Escadrille 31 (Hoplite Archer) textureset and decals (Tan)
    Escadrille 48 (Rooster) textureset and decals (Tan)
    Escadrille 65 (Dragon) textureset and decals (Tan)
    Escadrille 81 (Grayhound) textureset and decals (Camo)
    Escadrille 94 (Running Reaper) textureset and decals (Camo)
    Escadrille 3 (Les Cigones) textureset and decals (Tan)
    Escadrille 3 (Les Cigones) Alternative with Stripe textureset and decals (Tan)
     
    Escadrille 3 is skinned to a higher degree than the other Escadrille with personal markings and semi accurate paint jobs/numbers
     
    The French seemed to paint all their aircraft individually so many compromises were necessary
     
    The Folder structure is a little unusual (trying to save space)
    Straight under the SPAD7_180 folder there is a Decal folder (combined for all the new decals) and Folders for all the new Texturesets
    The main Tan Skins live straight in the SPAD7_180 folder as well so all the tan textureset’s can access then (some textureset folders have replacements depending on Escadrille)
     
    If you haven’t already done so you will need to extract the Spad XIII cockpit from the ObjectData.CAT into a separate cockpit folder under the SPAD7_180 folder if you wish to fly the SPAD7_180 (the two .ini’s provided point to a cockpit folder and make a few changes to the 13’s cockpit but they are not necessary if you have already done this)
     
    If you will need to use the provided SPAD7_180.ini if you wish to use the provided hanger and loading screen (or alter your own ini)
    There’s a wide screen version of loading screen in the folder “widescreen loading pic” just copy it over the existing pic or delete it depending on your needs
     
    I suggest you unzip this Download to a temp folder first and take what you need to the SPAD7_180 folder.
    Please remember to back up any files that may be overwritten in the SPAD7_180 folder first
    These Skins should work fine for the SPAD7_150 as well but the .ini files will be different
     
    Please feel free to use these skins and decals for your own work (non-profit only)
     
    Hope you enjoy them
     
    Vernon

    563 downloads

       (4 reviews)

    0 comments

    Submitted

  17. SPAD XIII "WhiteKnight"

    My personal SPAD XIII skin.once again you get to kick my ass.

    213 downloads

       (1 review)

    0 comments

    Submitted

  18. SPAD VII "Whiteknight"

    This is my personal SPAD VII now when I piss someone off you can shoot me down.

    152 downloads

       (1 review)

    0 comments

    Submitted

  19. RFC SPAD VII 2

    Another semi-fictional skin based on pics.

    165 downloads

       (1 review)

    1 comment

    Submitted

  20. RFC Tan SPAD VII

    semi-fictional based on a No 19sq pic I saw.

    209 downloads

       (1 review)

    0 comments

    Submitted

  21. RFC Brown/green SPAD 7

    Generic RFC SPAD 7

    191 downloads

       (1 review)

    0 comments

    Submitted

  22. Grey SPAD 7

    Generic early light grey SPAD 7

    186 downloads

       (0 reviews)

    0 comments

    Submitted

  23. Camo SPAD VII

    just a plain french camo Spad VII

    191 downloads

       (1 review)

    0 comments

    Submitted

  24. SPAD XIII Barraca

    hello
    this is the SPAD XIII of Francesco Baracca the Italian ace in June 1918
    to see more on him:CLICK HERE

    265 downloads

       (3 reviews)

    0 comments

    Submitted

  25. SPAD XIII in British service

    A generic RFC camo skin for the SPAD XIII, for either of the two RFC squadrons which operated this machine (No.19 and No.23 Sqn).
    An adaptation of the stock French camo skin, with RFC insignia and codes added.

    388 downloads

       (1 review)

    0 comments

    Updated

Sign in to follow this  


×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..