Other Entente Aircraft

Updated September 8, 2007

GauntletMk1

By Hinchinbrooke

She's not a WWI aircraft, but she's set up for FE. Definitely Beta, but if you want something with some zip against those Fokkers, well, try her out.

1,519 downloads

(7 reviews)

0 comments

Updated January 8, 2007

Caproni Ca.3

By Monty CZ

Add on plane for the First Eagles The Great Air War 1918
Patch No.1 compatible
your comments are welcome at tosovsky.pavel (at) seznam.cz
Readme included.
Enjoy Monty

2,430 downloads

(14 reviews)

0 comments

Updated September 8, 2007

Morane-Saulnier Type L Pack

By Laton

Morane-Saulnier Type L Variants Ver.2 15 May 2007

Model by by Andre (Laton) Simpson
Skins by v. Deutschmark & Andre Simpson
FM by peter01

Please check the Readme file for other notes and installation intructions

V.2 Incorporates the new V3 FM's by peter01

1,639 downloads

(10 reviews)

0 comments

Updated September 8, 2007

Morane-Saulnier Type H

By Laton

Morane-Saulnier Type H Monoplane Ver.2 15 May 2007

Model by by Andre (Laton) Simpson
Skins by v. Deutschmark
FM by peter01

Please check the Readme file for other notes and installation instructions

V.2 Incorporates the new V3 FM's by peter01

1,589 downloads

(9 reviews)

0 comments

Updated September 8, 2007

Savoia Pomilio SP.3

By Laton

Savoia Pomilio SP3 Ver.1 May 2007

Model & FM by Andre (Laton) Simpson
Skins by v. Deutschmark

**Thanks to the SFP1 Dev A-Team (capun, CB Productions, Charles, Kesselbrut & The Wrench) for kindly providing the front gunner 3D Mesh**

Please check the Readme for other notes and installation intructions.

1,332 downloads

(6 reviews)

0 comments

Submitted May 5, 2007

Avro504C

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.

Bwf.
------------------------------------------------------------------------------------------------

AVRO 504C For FIRST EAGLES

INSTALL TO THE AIRCRAFT FOLDER...

MADE WITH 3DS MAX
BY BORTDAFARM

feel free to fart about with the bits n bobs

single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...

notes;;;
fm- player version (hard)
slot car flyers need not apply!

other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE

to

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

838 downloads

(2 reviews)

Updated September 8, 2007

Avro504D

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.

Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

AVRO 504D For FIRST EAGLES

INSTALL TO THE AIRCRAFT FOLDER...

MADE WITH 3DS MAX
BY BORTDAFARM

feel free to fart about with the bits n bobs

single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...

notes;;;
fm- player version (hard)
slot car flyers need not apply!

other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE

to

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

1,225 downloads

(2 reviews)

0 comments

Updated September 8, 2007

Farman Pack

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.

Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

Farman Shorthorn 4 pack For FIRST EAGLES

4 versions two armed two unarmed both french and RFC

INSTALL TO THE AIRCRAFT FOLDER...

MADE WITH 3DS MAX
BY BORTDAFARM

feel free to fart about with the bits n bobs

1,170 downloads

(4 reviews)

0 comments

Updated September 8, 2007

Farman Pack2

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.

Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------

Farman Shorthorn/Longhorn Double pack For FIRST EAGLES

MF11c and MF7 both french

INSTALL TO THE AIRCRAFT FOLDER...

MADE WITH 3DS MAX
BY BORTDAFARM

feel free to fart about with the bits n bobs

Notes#
the shorthorn MF11c is equiped with a 360 degree mounted MG
operated by the standing observer

1,179 downloads

(3 reviews)

0 comments

Updated September 8, 2007

MartinsydeG100

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.

Bwf.
------------------------------------------------------------------------------------------------

MARTINSYDE G100 "elephant" For FIRST EAGLES

revised model includes skin pack and pit

INSTALL TO THE AIRCRAFT FOLDER...

MADE WITH 3DS MAX
BY BORTDAFARM

feel free to fart about with the bits n bobs

notes;;;
fm- player version (hard)

slot car flyers need not apply!

other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE

to

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

1,026 downloads

(4 reviews)

Updated September 8, 2007

Bristol M1c C flt 73sqn

By gambit168

Hi Guys, this is a skin i did a while back ,and put on my brothers website, i was going to upload it here also but forgot to , so here it is for any1 who doesn't have it already

420 downloads

(4 reviews)

0 comments

Submitted May 13, 2007

FE8

By 101tfs

.max file only

517 downloads

(3 reviews)

0 comments

Updated June 25, 2009

Hanriot HD1

By EmlD

November-December 2007

Hanriot HD1 (Vickers MG in the middle)

Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200

EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

985 downloads

(5 reviews)

Submitted December 31, 2007

Hanriot HD1 CAM (Italy)

By EmlD

November-December 2007

Hanriot HD1 CAM (Italy) (Vickers MG on the leftside)

Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200

EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

761 downloads

(6 reviews)

0 comments

Submitted December 31, 2007

Hanriot HD1 Dual

By EmlD

November-December 2007

Hanriot HD1 Dual (2x Vickers MG)

Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200

EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

1,412 downloads

(8 reviews)

Submitted December 31, 2007

Farman F.30

Russia was the only country that used the French designed Farman F.30. While no other allies adopted it, the F.30 was the primary plane of the Imperial Russian Air Service and the Russians built about 400 of them at the Dux factory near Moscow beginning in 1915. It was used throughout WWI and was used by both sides during the Russian Civil Wars.

The Farman F.30 was powered my a Salmson 150hp water-cooled engine, had a single machine gun for the observer, and was said to be able to maneuver as well as the Eindeckers it faced. It was a general purpose plane, used originally as a fighter, and later for recon, artillery spotting, and light bomber missions.

My plane includes a loadout for a light bomb load. Decals and my skinning templates are included in the download.

I have included ojcar's "DummyMachineGun" data, Peter01's Lewis Machine Gun data in the download.

Warning
The Farman F.30 has a wider wingspan than First Eagles expects so you should install my "Airfields for Large Planes" available in the Combat Ace downloads area. Otherwise, when starting on the runway, your wings may be touching the wings of the planes next to you. This will cause an immediate collision and you or other planes in your flight may lose their wingtips as soon as the game starts.

Credits
Thanks to Ojcar for making the data file for the Farman F.30 and for making the data for the dummy machine gun.

Thanks also to Peter01 who made the data for the Lewis Gun.

Thanks also to Crowford who provided resources for the Farman cockpits.

Installation Instructions
For FE1 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder.

For FE2 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FarmanF30". Move the folder named "D" from your Aircraft/FarmanF30 folder into the Decals/FarmanF30 folder you just made.

You may not need to install the guns, they have been used on other planes and you may already have them. Instructions for installing the guns, if you should need them, are in a separate file included in this download.

184 downloads

(3 reviews)

0 comments

Submitted July 9, 2015

Ansaldo SVA5

By Laton

Ansaldo S.V.A.5 Ver 1.1 30 April 2009

Model, Skin & FM by by Andre (Laton) Simpson

Please check the read-me for installation instructions.

Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes

**1.1 - Mesh fix and changed FM

875 downloads

(3 reviews)

0 comments

Updated April 29, 2009

DH4 USAS "Liberty"

In addition to the British built version, the DH4 was also produced by American manufacturers and was equipped with a Liberty 12 cylinder engine. Although slightly less powerful than the British version, The DH4 Liberty was popular with its crews and was produced in large numbers. After the war, it became the standard general purpose plane for the US Air Service.

This upload features the US version, with a new FM by Ojcar. The Liberty engine was slightly heavier than the British version and performance was reduced. To compensate, American DH4s carried a slighty lighter bomb load than the British built planes.

I have included a new skin using the number decals that come with First Eagles (which you can set in the loadout screen) and a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads.

The skins are rather generic, I have included my skinning templates for those who wish to make better skins.

Credits
My thanks to Ojcar for making the data file for the DH4 Liberty.
My thanks also to Sinbad for providing the motivation and a great deal of resource information for this plane.

Installation Instructions
For FE1 - Unzip the file and move the folder named "DH4_Liberty" into the FirstEagles/Objects/Airplanes folder.

For FE2 - Unzip the file and move the folder named "DH4_Liberty" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "DH4_Liberty". Move the folder named "D" from the Airplanes/DH4_Liberty folder into the Decals/DH4_Liberty folder you just made.

382 downloads

(4 reviews)

Updated August 11, 2013

MartinsydeS1

This is the last machine that Bort' built for 1st eagles that I'm aware of.
The S1 wasn't in the original upload because it hadn't been done untill
later, by which time the both of us had pretty much left the scene.
As Bortdafarms web page is long gone, I'm adding the S1 to the collection here at CombatACE.

Disclaimer: This zip file(MartinsydeS1.zip) is the sole work and property of Bortdafarm.

Uploaded by Bwf.

289 downloads

(1 review)

0 comments

Submitted April 24, 2011

Sikorsky S-16

The S-16 was designed by Igor Sikorsky as fighter escort for bombers and was the first Russian-built aircraft with a synchronized machine gun. The plane was small and highly maneuverable, but had a smaller engine than intended and was outclassed by German aircraft of the time.
The dual axle landing gear was designed for landings on rough ground. Several versions of the S-16 were produced with variations in engines and wing configurations. Relatively few S-16s were produced, but were used throughout the war and in the Russian Civil War.
This plane carries the markings of the Eskadra Vozdushnykh Korablei (Squadron of Air Ships), the world's first strategic bomber group.
I have included four skins, several plain linen, and one gray-green. I have included my skinning templates so others can make new skins if they want.
Credits
And my thanks to ojcar, who created the FM to reproduce the nimble characteristics of the plane.
My thanks to Nix, who provided the sound for the Gnome 80hp engine (and revised it until I was happy.)

Historical Notes
The Russian Banner with the yellow square and two-headed eagle was the imperial banner and was not used on aircraft, but the replica in Connecticut uses it, so I used it on mine. The gray-green version uses a more accurate fuselage marking. If historical accuracy is important to you, change the decals.ini for texture set 1 to use "EVKBanner" instead of "ImperialBanner".
Wings Palette shows the gray-green plane with a red triangle on the fuselage. I believe this was a Bolshevik plane in which red was painted over the standard Russian markings. I used the standard markings on mine.

Version 2 Notes
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.

Version 3 Notes
I have made all new LODs, with higher detail and lower poly count, and with all new skins. Ojcar has made a new FM for this plane.

Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16, delete it and replace it with this version, including the decals. The sound file remains the same.
For FE1 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16". Move the folder named "D" from the Aircraft/SikorskyS16 folder into the Decals/SikorskyS16 folder you just made. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

483 downloads

(4 reviews)

0 comments

Updated June 24, 2018

Sikorsky S-16 Flatdeck

Several versions of the S-16 were produced with slight variations in the fuselage and wing configurations. This version has a flat deck behind the pilot and ailerons on both wings. It is based on my earlier versions of the Sikorsky S-16, but is a completely new plane.
The download includes 4 skins - 3 linen and one green - with appropriate decals. This plane has a fully functional cockpit. I have included my skinning templates so others can make new skins if they want.

Credits
My thanks to ojcar, who made the FM for the Sikorsky S-16.
My thanks also to Nixou, who recorded the sound for the Gnome 80hp engine.

Version 2 Notes
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.
Version 3 Notes
This is a completely new plane with new LODs, skins, and cockpit. This version has higher detail and a lower poly count than the previous version. This model also includes better detail for battle damage to the wings.

Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16 flatdeck, delete it, including the decals, and replace it with this version. The sound file remains the same.

For FE1 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. If you have the previous version, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

For FE2 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16_var". Move the folder named "D" from the Aircraft/SikorskyS16_var folder into the Decals/SikorskyS16_var folder you just made.
If you have the previous version of the Sikorsky, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

419 downloads

(2 reviews)

0 comments

Updated July 3, 2018

Airco D.H.5

The Airco D.H.5 was intended to be an improved version of the D.H.2, combining the power of a forward facing prop with the forward visibility of a pusher. The reverse stagger of the wings was an unusual configuration and the strange appearance of the plane may have contributed to false rumors of its bad performance. Although a slow climber, the D.H.5's strength and maneuverability made it excellent for ground attack and light bombing missions.

I have included two skins with decal ini's for both British and Australian markings. Both use the letter decals that come with First Eagles, which you can set in the Loadout screen. The British skin allows you to also set the squadron. (The Australians all used a white stripe on the tail instead of squadron markings.) I have included a set of serial numbers which will be applied randomly.

You can also choose a light bomb load in the Loadout screen.

Historical Notes
The serial numbers are fictious, but in the correct range for most D.H.5s.

Credits
My thanks to Ojcar for once again making an excellent data file for the D.H.5.
My thanks also to Nix for providing the realistic sound file for the Le Rhône engine.

Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.

For FE2 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH5". Move the folder named "D" from the Airplanes/AircoDH5 folder into the Decals/AircoDH5 folder you just made. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.

551 downloads

(3 reviews)

Updated August 11, 2013

Voisin LAS - 2 pack

The Voisin III was developed in 1914 and used throughout the war. It was produced in large numbers and was used by all the Entente powers. Although it was originally used as a fighter, reconnaissance, and ground attack plane, it was most commonly used as a bomber later in the war.

My version is the Voisin LAS with a full chord lower wing, a 9 cylinder water-cooled Salmson engine, and an 8mm Hotchkiss magine gun mounted on a tripod over the pilot.

Ojcar has created two data.ini's for the Voisin LAS, one for the 120hp engine, and one for the 150hp engine. For your convenience, I have created a completely separate plane for each. The models, decals and skins are the same, but the data.ini's and loadouts are different, with lighter bomb loads for the 120hp plane.

I have included three skinning options for each plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included my skinning templates.

I have also included decals for serial numbers which will be applied randomly.

There doesn't seem to be any standard way for the Voisin to carry its bombs, so I have included several loadouts with different sized bombs carried in different positions, with appropriate weights for each plane. (The loadout names are based on the size of the bombs, not the total loadout weight.)

Historical Notes:
The serial numbers are fictious, but in the correct range for the Voisin LAS.

The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.

Credits:
My thanks once again to Ojcar for making two excellent data.ini files for this plane.
Thanks also to Sinbad, 33Lima, and Dreamk who provided reference materials for the Voisin LAS.

Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.

Installation instructions:
For FE1: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder.

For FE2: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create two new folders named "Voisin3_120" and "Voisin3_150". Move the folder named "D" from the Airplanes/Voisin3_xxx folders into the corresponding Decals/Voisin3_xxx folders you just made.

To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".

563 downloads

(3 reviews)

0 comments

Updated August 10, 2013

Anatra DS "Anasal"