Add-On Ships

This Carrier Project Made its debut for Strike Fighters : Project 1 in March of 2006.
 
Since then three more versions were released for Thirdwire’s Gen 1 Titles.
There are a few more revisions done afterwards to the model for Gen 1 titles by other 3d artists in the Modding community.
 
This is Version 1.0 Gold of the current 3d Model, and has been extensively worked on to bring the quality and immersion level higher than in previous releases.
 
This will be the last version of this 3D Model released, work on a new model has begun that will allow me to bring the graphics detail up to higher standards with the newest features.
 
Carrier 3D Model : Skate Zilla
Carrier Textures : Skate Zilla (some textures borrowed from Stock CVA-63)
 
Weapons Systems : Skate Zilla (With assistance from Fubar512)
 
E-2C Static Model : Skate Zilla
E-2C Static Textures : Skate Zilla
 
F-18E/F Static Models : See Super Hornet Package PDF Readme
F-18E/F Static Textures : See Super Hornet Package PDF Readme
 
3d Carrier Crew Models and Textures: Julhelm
 
Carrier Systems Configuration: Skate Zilla
Carrier VisualFX : Skate Zilla
 
Testers (not including myself, Will be updated): EricJ, BlueFlame, Navy81, BlackShark61, PureBlue, Zola25, colmack.
 
Strike Fighters 2 Game Engine : Third Wire Productions
 
3d Content Creation Platforms : 3d Studio Max 7/2009/2011 (Discreet)
Texture Content Creation Platforms : Photoshop 7/CS5 (Adobe)

This model represents the long-hull straight-deck Essex class aircraft carriers, beginning with CV-14 USS Ticonderoga circa 1944. These ships were about 5 meters longer than the original CV-9 Essex, and featured heavier anti-aircraft armament.
 
Two versions of the ship are included: The original WW2 configuration, and the jet-capable Korean War era modernization. Decals for each unit are included. Random aircraft parking has been designed for currently available models with folding wings.
 
In addition to its complement of aircraft, each ship is armed with a battery of twin 5" guns and single 5" guns, plus a vast number of 40mm Bofors and 20mm Oerlikon anti-aircraft guns.
 
Please see the readme for full details and credits. Because this is a very high-poly, high-definition model, instructions are also included to improve framerate for those of us without premium supercomputers.
 
 
 
This model is dedicated to Wrench, who requested it, and who provides us with great playgrounds for all our toys.

CVN Ulyanovsk v1.0 for SF2
 
This is the cancelled Soviet nuclear carrier Ulyanovsk as it would have appeared had it been finished. Works fine in campaigns.
 
Uses a few big textures. If your computer can handle Ravenclaw's Buccaneer it can probably handle this.
 
Oh, and planes will generally launch through the skijump unless you use plenty of flaps. I tried having them launch diagonally but tbh either way looks as dumb. If you absolutely cannot live with it change the catapult ID's in the .ini.
 
Known Issues:
 
None that I know of.
 
Credits:
 
Model & textures by me except a few bits that were borrowed from TW CV-63 carrier.
 
These are: Catapult rails, deck trucks, railings and deck underside.
 
Custom FX and ini work by Fubar512
 
Disclaimer:
 
You MAY NOT use any part of this package in any payware package or otherwise take credit for it without first consulting me.
 
Any problems post on the combatace boards or mail to NilsD <at> bredband <dot> net

Carrier Deck Illumination Beta 1.0


 

Effects and .ini work: MiGbuster and Fubar512
Placement: MiGbuster
Technical Consultant: SidDogg


 
This mod DOES NOT contain the carrier models. It requires that you have Sf2V and/or SF2NA, and preferably both, installed on your system. The SCB-125 and CVA-63 models are native to SF2V. They are also included in SF2NA, which adds the CVN-68. We have included files for all three types.
 
To install: Simply drag the contents of the zip file, which are the two folders, "effects and groundobject", into the mod (saved games) folder of the desired title. For example, using SF2NA, the default path would be "YOUR NAME/Saved Games/Thirdwire/StrikeFighters2NorthAtlantic"
 
Note that this is a Beta, a work in progress, and as such, it is not perfect. Deck illumination is on all the time. The Optical Landing System is not-functional. These are currently due to the limitations of the series.

This model represents the Suffren class frigate of the French Navy, in service from 1967 to 2007. They were the first French ships to be designed as guided missile frigates, tasked with escorting the Clemenceau-class aircraft carriers.
 
The two ships of the class, Sufren and Duquesne, are easily recognizable by their huge radomes housing the DRBI-23 3D radar. The ships' primary weapon is the Masurca SAM, designed using data from the US Navy's Terrier program.
 
Three different versions are included, covering each major refit of their long service lives, adding Exocet missiles as well as upgrades for the guns and electronics.
 
While officially referred to as frigates, the Suffren class are destroyers for all intents and purposes and have destroyer "D" hull numbers. Their in-game role and RWR signature reflects this.
 
See the readme for full details and credits. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

This package includes every variant of the Ticonderoga class Aegis cruisers, including:
CG-47 Baseline 1 (Mk26 twin arm launcher)
CG-52 Baseline 2 (Mk41 VLS)
CG-59 Baseline 3&4 (improved sensors and weapons)
CG-52_06 (first round of modernization refits circa 2006)
CG-52_12 (final Cruiser Conversion Program refits, starting 2012)

Naturally, all sounds, decals, weapons, ship name and number lists are included. The CG-52 and CG-59 variants are further divided into air defense and land attack versions, armed with Standard Missiles and Tomahawks respectively. Each of the air defense ships also comes with two different data.ini files: the default, which uses a true VLS weapon system (albeit one missile and one target at a time and disables the Harpoon missiles), and a data_EX.ini version, which enables multiple simultaneous engagements and is almost as deadly as its real life counterpart. Use whichever one you like, depending on if you prefer realistic visuals or realistic performance.
 
The Ticonderoga has always been my "flagship" project (pun intended), and so I've updated the models using everything I've learned in the year since I started modding. I've also added a small Easter Egg for those of you who want to try a helicopter takeoff from from this ship.
 
 
Note: The weapon systems, collision mesh, and decals have been updated for compatibility with SF2: North Atlantic and the March 2012 patch. If you have not installed/do not plan to install either, this model will not work properly. See the readme file for full details.
 
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

SF2NA Ultimate Carriers Pack
 
This package collects a large number of aircraft carriers available at CombatAce, puts them into one package with semi-standardized data tweaks, numerous error corrections, complete SF2NA conversions, and touched up or overhauled skins. Also included are several new carriers based on existing models. This package is thus designed as an ultimate one-stop shop for all carriers available at CombatAce, exclcuding USN and Soviet carriers.
 
Please note that there are no new models in this package. All models included here have been released before on CombatAce. Indeed, most (but not all) of carriers included here have been released previously with rudimentary SF2NA conversions applied.
 
So, why re-release these carriers in this package? This package brings several new things to the table, including:
 
- corrected DATA.INIs (basic ship data, catapult data, angled deck configuation, etc.)
- several tweaked or significantly overhauled skins
- indexed decal sets to represent various carrier classes
- several newly created individual ships (usually to represent particular carriers
at specific stages of their service lives)
 
The majority of the ships here are Royal Navy carriers, though you will also find carriers from Canada, Australia, India, the Netherlands, Italy, Spain, and France.
 
Please read the remainder of this ReadMe carefully, as important instructions regarding installation and use are included below.
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~
What's Included
~~~~~~~~~~~~~~~~~~~~~~~~~
 
This package includes 34 different carriers, which are organized by carrier class or by nation (in the case of France, Italy, & Spain). Some of these carriers are set up to represent entire classes or partial classes, with decals indexed by ship number.
 
Please note that you may find several different versions of the same carrier, each configured to represent the same ship at a different stage of its service life.
 
There are also several fictional or "faux" carriers.
 
Colossus Class
--------------
\
R95 Arromanches
\
Colossus Class CVL [Colossus,Glory,Ocean,Venerable,Vengeance, & 5 others]
\
HNLMS Karel Doorman
 
Majestic Class
--------------
\
HMCS Bonaventure
\
HMCS Magnificent
\
HMAS Melbourne
\
HMAS Sydney
\
INS Vikrant
 
Centaur Class
-------------
\
HMS Albion
\
HMS Bulwark
\
Centaur Class CV [Centaur & Hermes]
\
HMS Centaur (Early)
\
HMS Hermes ('80s)
\
INS Viraat
 
Invincible Class
----------------
\
Invincible Class CVL [invincible,Illustrious,Ark Royal)]
 
Illustrious Class
-----------------
\
Illustrious Class CV (Early) [illustrious,Formidable,Victorious]
\
Illustrious Class CV [illustrious,Formidable,Victorious]
\
HMS Victorious (Post-refit)
 
Implacable Class
----------------
\
Implacable Class CV (Early) [implacable,Indefatigable]
\
Implacable Class CV [implacable,Indefatigable]
 
Audacious Class
---------------
\
HMS Ark Royal
\
HMS Eagle
\
HMS Eagle (Late)
 
Misc/Other
----------
\
HMS Eagle (1918)
\
HMAS Australia (fictional) [using SCB-125 model]
\
Merchant Aircraft Carrier
\
INS Vikramaditya
\
HMS Vindictive (fictional)
 
France
------
\
R91 Charles de Gaulle
\
Clemenceau/Foch Class CV [using SCB-125 model]
\
La Fayette Class CVL [La Fayette, Bois Belleau]
\
Mistral Class BPC [Mistral,Tonnerre,Dixmude]
 
Italy/Spain
-----------
\
R01 SNS Dedalo
\
C551 Giuseppe Garibaldi
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~
Installation Requirements
~~~~~~~~~~~~~~~~~~~~~~~~~
 
All of the carriers included in this package are configured for use with "Strike Fighters 2: North Atlantic" (SF2NA). Thus, for any particular install you plan to use one of these carriers in...
 
- SF2NA must be part of the install base (even if other SF2 titles
such as SF2V or SF2E are also merged into the install)
- the game .EXE you use must be either the main SF2NA executable
(StrikeFighters2 NorthAtlantic.EXE) or a re-named copy of it in
the case of custom mod installs.
 
If you try to use these carriers in an install that does not conform to the above requirements, you will likely find your aircraft sinking into or falling through the carrier deck.
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~
Installation
~~~~~~~~~~~~~~~~~~~~~~~~~
 
All of the files to be installed can be found in \To_Mods_Folder. The task of installing the various bits included here is fairly straightforward. For any particular install that you want to install carriers to, do the following:
 
1. Install the supporting files
 
Supporting files include all the files found in the following folders, which should be copied or moved to the corresponding folders in your Mods folder:
 
\Effects
\Flight
\Objects\Guns
\Objects\Weapons
\Sounds
 
Please note that the \Flight folder does include a new SOUNDLIST.INI. If your destination Mods folder already has a customized SOUNDLIST.INI, you can simply add the new entries from For_SOUNDLIST.txt (found in the root of this package) instead of overwriting your entire custom SOUNDLIST.INI.
 
2. Add the carriers
 
The carriers themselves can be found in the numbered directories (which are organized by class or nation). The carriers should be installed to \Objects\GroundObject in your Mods folder.
 
DO NOT simply grab all the numbered directories and drop them in the GroundObject folder, as they won't show up in game. Instead, you will need to drag and drop the particular carrier folders from within the numbered directories.
 
3. Add the decals
 
For any carriers that you install you should also install the corresponding decals, found in \Objects\Decals. Decals go to the same location in your Mods folder (\Objects\Decals). The decals folders for carriers are named the same as the corresponding carrier that uses them. Please note that there are a few carriers that do not have decals.
 
4. Install the LODs for Hermes & Viraat
 
We were not able to include the LOD files needed for the HMS Hermes ('80s) and the INS Viraat (which uses the same model as the Hermes). You will need to download the "Falklands '82 for SF2" package from CombatAce, which includes the necessary LODs:
 
http://combatace.com/files/file/13296-sf2-falklands-mod-redux/
 
When the download is unpacked, you can find the ncessary LOD files in this location:
 
\_For_SF2NA\Objects\GroundObject\Hermes
 
Copy the .LOD files to the folders for the the Hermes and Viraat, which are included in the \1c_Centaur_Class directory of this carrier pack.
 
Once the LODs are installed, make a COPY of the R12-R2b.LOD in each folder and rename it to R12-R2b_COL.LOD (this is the collision LOD for the ship).
 
* * *
 
That's it. You should be good to go.
 
If any carriers are not showing up properly in the game, that's because you didn't install them correctly. My advice will always be to review the steps above, consult the Knowlede Base at CombatAce.com for the relevant articles on installing mods to Mod folders, and try again.
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~
Notes
~~~~~~~~~~~~~~~~~~~~~~~~~
 
A few notes about the carriers included in this pack.
 
1. Decal problems: many of the models included in this pack suffer from decal problems -- decal bleeding, mirroring, doubling, and occasional distortion. Although I have tried to minimize these problems as much as possible, you might see decals being inappropriately mirrored, often in a distorted fashion, in odd locations on some of these boats. Also, to minimize problems, I have occasionally positioned decals slightly forward or aft (or above or below) where they ideally ought to be.
 
2. Texture mapping problems: some of these models also suffer from texture mapping issues, which means that sometimes things just quite don't line up properly or aren't perfectly mirrored from one side of the boat to the other (because the texture map is effectively wrapped around the model in an odd fashion).
 
3. BPC Mistral: included in this package is an alternate skin for the BPC Mistral named FNGrey. I would have liked to make it the default, but discovered that the bridge area of this carrier is simply not mapped -- meaning that part of the island will always remain the default light blue. Also, decals will not show up properly on large parts of the hull, which means that I haven't been able to use them for the hull numbers of the three ships in this class. Thus, we're stuck the painted-on hull numbers for the lead ship of the class.
 
4. R91 de Gaulle: the model for this carrier is very poly heavy (I'm guessing because of the static aircraft and deck crew included). On some PCs game performance and frame rates might lag severely. As with the Mistral (from the same author), some parts of the model simply aren't mapped, which has limited what I've been able to do with the skin.
 
Finally, it's worth pointing out that many of the models included in this package date from 2004-2006. The oldest are seven or eight years old -- created during the first few years of the ThirdWire series. Although they still stand up fairly well, they are showing their age. Carriers (and ships more generally) seem to be some of their more difficult jobs that modelers can tackle in the ThirdWire series (along with cockpits), so we should be thankful that we have the models we do.
 
 
~~~~~~~~~~~~~~~~~~~~~~~~~
Credits
~~~~~~~~~~~~~~~~~~~~~~~~~
 
This mod package includes the work of several modders:
 
Hinchinbrooke .............. original models for all Royal Navy carrier classes,
except where noted below; La Fayette (old)
AlphaSim & A-Team .......... Hermes & Viraat
Aleks1 ..................... BPC Mistral & Charles de Gaulle
YEYEYE ..................... La Fayette & Dedalo
bobrock .................... Giuseppe Garibaldi
ThirdWire .................. HMAS Australia & Foch/Clemenceau
Zola25 ..................... skin for INS Vikramaditya
Wrench ..................... previous mods to many carriers included here
Paulopanz .................. previous mods to many carriers included here
 
The line drawings included in \_drawings are from ShipBucket.com or The-Blueprints.com.
 
If we have neglected to credit anyone here, please let me know. I will get it fixed ASAP.
 
---------------
Eric Howes
eburger68
12/19/2012

This model represents the Kidd class destroyers, multi-role warships based on the Spruance class. Originally built for the Imperial Iranian Navy, they were cancelled after the 1979 revolution and completed for the US Navy instead, serving from 1981 until 1999.
 
After decommissioning, all four ships were sold to Taiwan. They were recommissioned for the Republic of China Navy as the Kee Lung class starting in 2005. These ships are included in the package as a separate variant with updated weapons and custom decals, and are capable of leading ROCN task groups in missions.
 
The Kidd class will join existing USN task groups once installed, but for ROCN task groups, you will need an additional ship pack.
 
See the readme for full details. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

This model represents the La Fayette class frigate of the French Navy, in service from 1996 to present. Referred to as a stealth frigate, the La Fayette's angled design and radar-absorbent composites greatly reduce its radar cross section.
 
Five La Fayette class ships are now in French service, and export variants have been sold to Taiwan, Saudi Arabia, and Singapore (not included in this package).
 
The La Fayette is armed with a modernized 100mm gun, 20mm close in weapons, eight MM40 Exocet missiles, and eight Crotale missiles (with reloads). The flight deck can support one medium helicopter.
 
See the readme for full details and credits. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!
 
 
Special thanks to FRPignon for the hull number decals.

This model represents the Forbin class frigate of the French Navy, in service from 2008 to present. The Forbin is part of the Horizon program of air defense frigates for France and Italy.
 
Two of the class have been built for the French Navy, replacing the Suffren class. The Italian Horizon differs significantly in loadout, and is not included in this package.
 
The Forbin is armed with two super-rapid 76mm guns and 20mm GIAT cannons, eight MM40 Block 3 Exocet missiles, Mistral short-range SAMs in two Sadral launchers, and 48 Aster 30 SAMs in Sylver VLS. (The sound effect for the Aster missiles is taken from actual test footage.) The flight deck can support one medium helicopter.
 
Early and late versions of the Mistral missile are included. They are compatible with other ground objects as well as helicopters (using "SpecificStationCode=mistral").
 
You may also wish to download my Aquitaine and La Fayette frigates to complete your collection of modern French surface combatants.
 
See the readme for full details and credits. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

This is a full conversion of the ID(io)T Team's Iowa class battleship for SF2:NA/April 2012. Along with the expected effects, weapons, ship names, and collisions modifications, I rearranged the entire system hierarchy which fixed a critical issue causing the ship to sink after only a single missile strike. (It's now almost as tough as the real thing.) Tomahawk launchers are also fully functional and deadlier than ever. In addition, the aft deck now supports up to two helicopters. Keep in mind that there are no catapults or arresting wires, so fly with care.
 
This is a complete package with all the guns, sounds, and effects. Even if you have the model already or are using the version included in DS, I humbly recommend that you try out this fully updated version.
 
All credit for this model goes to the ID(io)T Team. Thanks for giving us such a magnificent battleship.

ID(io)T Team Iowa Class Battleship 80s for Strike Fighters 2
 
History:
 
In the 1980s, as part of President Ronald Reagan's plan to rebuild the U.S. military and create a 600-ship Navy—which would counter the new Soviet Kirov class battlecruisers—all four of the battleships were reactivated and modernized under the 600-ship Navy program.each battleship was overhauled to burn navy distillate fuel and modernized to carry electronic warfare suites, close-in weapon systems (CIWS) for self-defense, and missiles.After recommissioning, the modernized battleships operated as centerpieces of their own battleship battle groups (BBBGs), consisting of one Ticonderoga-class cruiser, one Kidd-class destroyer or Arleigh Burke-class destroyer, one Spruance-class destroyer, three Oliver Hazard Perry-class frigates and one support ship, such as a fleet oiler.
During their modernization in the 1980s each Iowa-class battleship was equipped with four of the US Navy's Phalanx CIWS mounts, two of which sat just behind the bridge and two which were next to the after ship's funnel. Iowa, New Jersey, and Missouri were equipped with the Block 0 version of the Phalanx, while Wisconsin received the first operational Block 1 version in 1988.[70] The Phalanx system is intended to serve as a last line of defense against enemy missiles and aircraft, and when activated can engage a target with a 20 mm M61 Vulcan 6-barreled gatling cannon at a distance of approximately 3.6 km (2.2 mi).
A close-up look at an Armored Box Launcher unit, this one aboard USS New Jersey As part of their modernization in the 1980s, each of the Iowa-class battleships received a complement of Armored Box Launchers and "shock hardened" Mk. 141 quad cell launchers. The former was used by the battleships to carry and fire the BGM-109 Tomahawk Land Attack Missiles (TLAMs) for use against enemy targets on land, while the latter system enabled the ships to carry a complement of RGM-84 Harpoon anti-ship missiles for use against enemy ships. With an estimated range of 675 nautical miles (1,250 km; 777 mi) to 1,500 nautical miles (2,800 km; 1,700 mi) for the Tomahawk missile and 64.5 nautical miles (119.5 km; 74.2 mi) to 85.5 nautical miles (158.3 km; 98.4 mi) for the Harpoon missile system, these two missile systems displaced the sixteen-inch guns and their maximum range of 42,345 yards (38,720 m) (24.06 mi)[28] to become the longest-ranged weapons on the battleships during the 1980s. It has been alleged by some[73][74][75] that the battleships carried the TLAM-A (also cited, incorrectly, as the TLAM-N)—a Tomahawk missile with a W80 nuclear warhead—during their 1980s service with the United States Navy, but owing to the United States Navy's policy of refusing to confirm or deny the presence of nuclear weaponry aboard its ships, these claims can not be conclusively proved.
During the 1980s these battleships made use of the RQ-2 Pioneer, an unmanned aerial vehicle employed in spotting for the guns. Launched from the fantail using a rocket-assist booster that was discarded shortly after takeoff, the Pioneer carried a video camera in a pod under the belly of the aircraft which transmitted live video to the ship so operators could observe enemy actions or fall of shot during naval gunnery. To land the UAV a large net was deployed at the back of the ship the aircraft was flown into it. Missouri and Wisconsin both used the Pioneer UAVs successfully during Operation Desert Storm.
 
 
USS Iowa (BB-61)
 
Reactivated in the early 1980s, Iowa operated in the Atlantic Fleet, cruising in North American and European waters for most of the decade and participating in joint military exercises with European ships. On 19 April 1989, 47 sailors were killed following an explosion in her No. 2 turret. In 1990, Iowa was decommissioned for the last time and placed in the mothball fleet. She was stricken from the Naval Vessel Register on 17 March 2006. Iowa is currently anchored as part of the National Defense Reserve Fleet in Suisun Bay, California and is available for donation as a museum and memorial.
 
 
USS New Jersey (BB-62)
 
Reactivated in 1982 under the 600-ship Navy program, New Jersey was sent to Lebanon to protect U.S. interests and U.S. Marines, firing her main guns at Druze and Syrian positions in the Beqaa Valley east of Beirut. Decommissioned for the last time 8 February 1991, New Jersey was briefly retained on the Naval Vessel Register before being donated to the Home Port Alliance of Camden, New Jersey for use as a museum ship in October 2001
 
 
USS Missouri (BB-63)
 
Reactivated in 1984 as part of the 600-ship Navy plan, Missouri was sent on operational cruises until being assigned to Operation Earnest Will in 1988. In 1991, Missouri participated in Operation Desert Storm, firing 28 Tomahawk Missiles and 759 sixteen-inch (406 mm) shells at Iraqi targets along the coast. Decommissioned for the last time in 1992, Missouri was donated to the USS Missouri Memorial Association of Pearl Harbor, Hawaii, for use as a museum ship in 1999.
 
 
USS Wisconsin (BB-64)
 
reactivated in 1986 as part of the 600-ship Navy plan. In 1991, Wisconsin participated in Operation Desert Storm, firing 24 Tomahawk Missiles at Iraqi targets, and expending 319 16-inch (406 mm) shells at Iraqi troop formations along the coast. Decommissioned for the last time 30 September 1991, Wisconsin was placed in the reserve fleet until struck from the Naval Vessel Register on 17 March 2006 so she could be transferred for use as a museum ship. Wisconsin is currently berthed at the Nauticus maritime museum in Norfolk, Virginia.
 
 
-------------------------------------------------------------------------------------------------------------------
Inside the package:
 
The Iowa class battleship with all the 4 ships variations.
Fully working 16", 5", Phalanx gun batteries and Fire direction turrets.
New BGM-109C Tomahawk missiles. (be carefull as sometimes they are used as SAMs too because the ship can engage air and ground targets)
Orbiting RQ-2 Pioneer drone.
 
-------------------------------------------------------------------------------------------------------------------
Installation:
 
Simply copy all the files in the respective directory of your game folder.
"User"\Saved Games\ThirdWire\StrikeFighters2
 
-------------------------------------------------------------------------------------------------------------------
Credits:
ID(io)T Team : Model, Weapons, Testing
Torno : Skin
YeYeYe : Data INI
Spitwulf : INI work, Guns, Effects and sound
Typhoid : Precious counseling
 
Beta testers: All the above plus Silverbolt, Canadair and The Test Pilot
-------------------------------------------------------------------------------------------------------------------
 
Legal stuff:
 
This mod is freeware. Commercial use is not allowed.
 
 
Enjoy the cruise.

This model represents the Leahy class, in service from 1962 to 1995. The Leahy class was dedicated missile cruiser, equipped with fore and aft twin SAM launchers, and primarily tasked with defending fleet elements.
 
This package contains three versions of the Leahy, separated into the major refits the class underwent during its service life:
As built in 1962: Equipped with Terrier missiles and two 3" twin turrets
AAW refit circa 1968: Terriers replaced with SM-1ER, electronics updated to support new missiles
NTU refit circa 1988: New radars, 3" guns replaced with Harpoon launchers and Phalanx CIWS, SM-1ER replaced with SM-2ER

Each version has its own names.ini list, so each variant will appear in task forces in the correct era. Each version of the ship is substantially different in their anti-air and anti-missile capability, which I have attempted to simulate as best as I can. The Harpoons on the NTU version are fully functional. SRBOC launchers (as on my other USN ships) are included on the model but disabled by default for simplicity's sake.
 
Note: The weapon systems, collision mesh, and decals have been updated for compatibility with SF2: North Atlantic and the March 2012 patch. If you have not installed/do not plan to install either, this model will not work properly.
 
When setting up a task force, using the USNgrey texture will allow hull decals based on the ship number. If placing the model as a single ship instead of a task force, please use the different texture sets to get a specific hull number.
 
 
If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

Hinch's Ark Royal SF-NA ready and working.
 
All credits to Hinchinbrooke as I made only some editings.
 
Inside the icluded readme You will have explain how to edit Buccaneers, Scimitars, Attackers, Sea Vixens and Sea Hawks for carrier operations.
 
Some escorts will follow. Stay tuned.
 
 
paulopanz

This package includes the Invincible class carrier, Type 42 Shefflield class destroyer, and Type 23 Duke class frigate updated to SF2:NA standards. These include updated weapon and data entries, ship names and numbers, collision meshes, radar frequencies, carrier decals and aircraft parking spots, and so on.
 
Make sure to update your Harriers, RN helicopters, and other models with the relevant data if you want them to show up on the Invincible's deck. Enjoy!
 
Thanks to:
 
-Gepard for pointing out flight deck problem
-Hinchinbrooke for original Invincible and Type 42 models
-SUICIDAL for original Type 23 model
-Bobrock for the additional Invincible skin

French Naval Forces Pak
=For SF2, Full-5 Merged and/or SF2:NA -ONLY!!!- =
 
AKA: "Faux French Naval Units", the "SI" means 'Stand-In'
 
*Note: You =MUST= have SF2NA installed somwhere for this mod to work, as 2 ships reference LODs that are only available with SF2NA or a Full-5 Merged install. If you don't meat this minimum requirement, do NOT download this pak, as you'll be unable to use it*
 
**Notex2: ALL of the vessels depicted herein are 'stand-ins' for the Real Life ™ naval vessels they depict. I've chosen to use the "best, closest shapes". In this regard, they DO have a physical approximation to the real boats.*
 
This pack contains 3 "Stand In" ships representing French Naval vessels:
 
Clemencau Class CV (uses SCB125 Essex)
Duperre Class DD (using Hinch's Cavailer)
Leygues Class DDG (using the SF2NA Spruance)
 
Included are sounds, and instrucitons for editing the soundlist.ini to add them. Also included is the 100mm ACAS gun.
 
As always, fairly easy to follow, yet detailed install instructions are included. Please READ them!
At the very least, this WILL give the DLC French Crusader and Super Etendards a home. Please accept them in the spirit intended!
 
Happy Landings!

CVN Ulyanovsk



by



Julhelm


 
This model represents the Soviet Project 1143.7 CVN Ulyanovsk, as it probably would have appeared had the project had been carried through to completion.
 
I won't go into the actual history of the ship, as it's just as easy for anyone so inclined to perform an online search and dig up all the relevant details on the vessel.
 
This model was designed and optimized for SF2:NA, and that means Windows Vista, Windows 7, or Windows 8. At the very least it requires the latest SF2 series patch for its systems and DX10 visual effects to work properly.
To install this package, simply place the folders located inside the .RAR archive into the mod folder of whichever SF2 title you desire the ship to appear in.
 
Additional work may be required on your part to ensure that the ship's TEWS RWR symbol (SkyWatch) is added to the RWR list of any aircraft so equipped. Instructions on how to do this, can be found on the SF2 knowledge base, courtesy of EricJ:
http://combatace.com/topic/44441-making-a-custom-tga-for-tews-radar-warning-recievers/
 
Sound effects will also require editing of the soundlist.ini file in order to work.
 
I’ve included a modified soundlist.ini file, for those who do not have it extracted.
 
Warning: Be careful if you already have an existing custom soundlist.ini file, as it will be overwritten. In that case, simply add the following lines (shown below), taking care to follow the existing numbering sequence (the soundlist.ini will reside in your flight folder). Use the supplied soundlist.ini as a guide.
SoundFileXXX=Underway
SoundFileXXX=ReductionGear
SoundFileXXX=CIWS
 
[underway]
Priority=Normal
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
 
[ReductionGear]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=4
MaxDist=2000.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
 
[CIWS]
Priority= Normal
Looped=TRUE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=2000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
 
Known issues:
 
1) The supplied SA-N-11 Kortik SAMs are not precisely scaled, so they were placed in the center of each Kashtan's missile tube cluster. They also do not have a defined booster stage in their model file, so don't expect booster separation. Also, the actual SA-N-11 is guided by an optical tracking system in real life. Again, this is not supported by the series, so they were given high counter-measure rejection and probability of intercept values, to compensate.
 
2) As of the present date (October 7 2012) Third Wire does not support a PROPER VLS system on a vessel that's also equipped with mutiple SAM types, on slewable mounts. To put it simply, one can have a working VLS system and nothing else, or one can have working Kashtans. I chose the latter option, though the nodes and missiles are supplied if this situation were to change in the future.
 
3) Third Wire has not made provisions for a working "ski-jump", so virtual bow catapults are used instead, and aircraft thus launched will appear to fly through the bow ramp.
 
Credits:
 
Ulyanovsk model, SA-N-9 model, and Textures for both, by Julhelm
 
SA-N-11 missile model and textures, based on the SA-19 by Gabilon.
 
Sound & Visual effects, and all data.ini work, by Fubar512
 
Testing by Dave, Wrench, Brain32 and Crusader.

The Farragut class was the second destroyer class of the United States Navy to be named for Admiral David Glasgow Farragut.
The class is sometimes referred to as the Coontz class, since Coontz was first to be designed and built as a guided missile ship,
whereas the previous three ships were designed as all-gun units and converted later.
Ten Farragut-class ships were ordered between 1955 and 1957.
Each ship displaced 5,800 tons under full load, with a length of 512 feet (156 m), a 52-foot (16 m) beam and a top speed of 33 knots (61 km/h).
Originally commissioned as guided missile frigates (DLG), they were redesignated as guided missile destroyers (DDG) under the fleet realignment in 1975.
They were also the only redesignated ships to be renumbered as well under the realignment, with the first unit changing from DLG-6 to DDG-37 and
all subsequent vessels being renumbered upwards in order.
 
All ships of the class were decommissioned between 1989 and 1994 and subsequently scrapped.
 
What's in:
- a whole working escort class SF-2 ready for Vietnam era scenarios
- numbers/names decalset
 
(*) You need YAP to grab the lod file
 
CREDITS:
- Yankee Air Pirate (needed)
- Paulopanz SF-2 porting & new decals
- Colmack for missiles put in place
 
INSTALL:
- extract the rar
- take Coontz2.lod in GroundObject/DLG-9 folder from your Yap WoV install
- put it inside GroundObject/Coontz extracted folder
- put all in your main mod folder
 
enjoy
@paulopanz

This model represents the Nanuchka class corvette, a Cold War era missile boat used by the Soviet Union and several export customers.
 
Three different versions of the ship are provided:
Nanuchka I class corvette (Soviet version; classified as a frigate in game so that it can appear in Soviet task forces)
Nanuchka I class missile boat (Soviet version; classified as a patrol boat)
Nanuchka II class missile boat (export version for India, Algeria, and Libya; classified as a patrol boat)

All three versions may be installed together with no conflicts or other issues.
 
The Nanuchka series are quite heavily armed for their size, with a 57mm twin gun, SA-N-4 Gecko launcher, and either six SS-N-9 Siren missiles (Nanuchka I) or four SS-N-2C Styx missiles (Nanuchka II). Naturally, all of these weapons are fully functional on the models.
 
See the readme for full details. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

Julhelm's Container Ship for SF2


 

Model and Textures: Julhelm



Effects and .ini work: Fubar512


 
 
This mod is designed and optimized for the SF2 series, and may not work properly in SF1.
 
To install: Simply extract the contents of the 7z archive file into the mod (saved games) folder of the desired title. For example, using SF2NA, the default path would be "YOUR NAME/Saved Games/Thirdwire/StrikeFighters2NorthAtlantic"
 
Note that model's running lights will be on all the time. This is currently due to the limitations of the series.
 
To enable the included sounds, you must have access to the soundlist.ini, which can be extracted from the flightdata,cat file. It must then be placed into your game's flight folder, and the following edits should be made to it (note, if you have a custom soundlist.ini already, simply add the following lines in their appropriate numerical order. Don't forget to edit the XXX entries to match your existing sequence).
 
SoundFileXXX=Underway
SoundFileXXX=MarineDiesel
 
[underway]
Priority=Normal
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=0
 
[MarineDiesel]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=0

More detail added to skins and lights added.
 
Includes 2 different Deck styles.
 
See the Readme for info and credits
 
 
 
You need the full Ark Royal model from eburger68 (you just paste in this mod and overwrite):
http://combatace.com/files/file/13758-sf2na-ultimate-carriers-pack/
 
 
 
Tested in SF2NA only

Minerva Class for Strike Fighters 2
 
Version 1.1 Release 06/12/2015
 
This model is not to be used in any commercial or for-profit packages. It may, however, be used in any freeware mod. According to the Combat-Ace terms of use.
 
This model represents the MInerva Class corvette in the service with the Italian Navy.
 
Contents:
 
-Objects-
MInerva Class Corvette
 
-Weapons-
Aspide Surface to Air Missile
 
-Guns-
OtoBreda 76 mm
 
-Decals-
HUll numbers for all the ships in service
 

Installation (SF2):
 
Extract each folder into the matching folders in your mod directory.
 

Notes.
 

v. 1.0: Initial Release
 
Credits:
 
Model:angelp, WhiteBoySamurai
Skins and textures: angelp
Ini files:angelp
Decals: angelp

Maestrale class Frigate for Strike Fighters 2
 
Version 1.0 Release 12/05/2015
 
This model is not to be used in any commercial or for-profit packages. It may, however, be used in any freeware mod. According to the Combat-Ace terms of use.
 

Contents:
 
-Objects-
Maestrale Class Frigate
 
-Weapons-
Otomat Teseo MK2
Aster30
 
-Guns-
OtoBreda 127mm
 
-Decals-
HUll numbers for all the ships in service
 

Installation (SF2):
 
Extract each folder into the matching folders in your mod directory.
 

Notes.
 

v. 1.0: Initial Release
 
Credits:
 
Model:angelp, WhiteBoySamurai
Skins and textures: angelp
Ini files:angelp
Decals: angelp
Weapons; WhiteBoySamurai, angelp

This package contains the complete collection of Ulsan class frigates of the Republic of Korea Navy:
Ulsan Flight I (c.1980), armed with two 76mm guns, four twin 30mm AAA guns, and eight Harpoon missiles Ulsan Flight II (c.1986), armed with two 76mm guns, three twin 40mm AAA guns, and eight Harpoon missiles Ulsan Flight III (c.1988), armed with two 76mm guns, three twin 40mm AAA guns, and eight Harpoon missiles (with the aft guns on an elevated platform for better firing arcs)

 

These ships are modular and share a common hull design with different weapon loadouts. They are essentially a larger cousin of the contemporary Donghae and Pohang corvettes.
 
See the readme for full details and credits. If you have any questions, comments, concerns, or constructive criticisms regarding this model, please do not hesitate to contact me. Thank you!

*************************************************************************
***** LHA Mod For Strike Fighters NA *****
*************************************************************************
 
This is a mod to make the stock LHA from SF North Atlantic usable as an aircraft
carrier.
 
You must have SF North Atlantic for this to do anything for you.
 
*************************************************************************
***** Installation *****
*************************************************************************
 
Drop the contents of the "LHA" folder into the top level of your mod folder.
 
If you choose to, drop the contents of "Optional_Files" into the top level of
your mod folder as well. Details below...
 
*************************************************************************
***** Notes *****
*************************************************************************
 
For single missions and parked aircraft to work properly:
 
- A terrain with limited nations needs to have "USMC" as a FriendlyNation in
it's nations file. A modified ICELANDNA_NATIONS.INI is included
 
- If you're using Battle Groups in user-made missions, make sure the group's
nation is set to "USMC"
 
- For parked aircraft to show up, they must be "USMC" and have
"CarrierBased=TRUE" and "CarrierParkSpan=2.00" in their _data.ini. A
modified version of AV-8A_DATA.INI for Wrench's AV-8A is included.
 
- The first catapult has no effect, and requires you to use thrust vectoring
to take off. This also means your flight as to be limited to a max of 4,
or the 5th aircraft will crash on takeoff.
 
- AI aircraft don't use thrust vectoring to land, and must land with a fake
arrestor hook to come aboard. One is included in the modified
AV-8A_DATA.INI.
 
- This was tested with Wrench's AV-8A, and the _data.ini included
 
http://combatace.com/files/file/11938-av-8a-harrier-for-sf2/
 
*************************************************************************
***** Bugs *****
*************************************************************************
 
Non-STOVL, USMC aircraft, sometimes have the LHA defined as their home base, in
single missions. Setting "CarrierBaseSize=SMALL" for the LHA and
"MinBaseSize=MEDIUM" for the aircraft, does not prevent this. Maybe this is
something TK will fix for us.