Jump to content

WW2 Era Aircraft

Sign in to follow this  

Sub Category  
SUBCATEGORIES
    1. IAR 80/81 REDUX PACK

      IAR 80/81 PACK.
      I was not originally going to release this pack, as I was unsure of the reaction to a relativley unknown ( unfortunately ) Fighter. but after the relative success of the PZL's I uploaded last week, I though it would be nice to send these IAR's your way too. The IAR's were only ever used by the Romanians, and was in service until the early 50's so that in itself speaks volumes about this rather attractive aircraft. 
      Anyway, this is a slight rework of Pasko's IAR 80A and 81C, I have also included a <cough> alternative and completely "What if" IAR 80P I shall let you look and see at to what  THAT is all about !!! 
       
      So, the details, I have edited the original skins, and have reworked ALL the decals, I have added the stencilling as accurately as I could, but there maybe a few errors here and there in the actual positioning of them, as finding detailed pictures of the type is just not there. The stencilling is very sparse, so I think I have got it mainly right ( I hope !! ) I have updated the sounds, and the weapons loadouts, as for some unknown reason, the original bomb loadouts were wrong, So the 80A now carries ONLY 2, 50Kg bombs under the wings, and the 81C has the centreline 250Kg and 2, 50Kg under wing bombs. The 80P however has the original loadout, because why not, it is a "What if" innit hehehehehe. The "real" IAR's in this pack carry German weapons, and are armed with for the 80A 6,  7.9mm FN Brownings, and the 81C has 2 MG151 20mm,s and only 2 of the FN Brownings . The 90P's are armed with ITALIAN bombs, 50, 100, and 250 KG's and gun armament  comprises of 4,  Breda SAFAT 7.7 mm MG's and a pair of Breda SAFAT 12.7mm MG's.
      All the markings have been replaced from the original ones, which I found too bright and "in yer face" and then I added on the differing markings from later years. 
      Everything is included in the pack, aircraft, decals, guns, pilots, weapons, and sounds. I have boxed everything up so it just a drag and drop kinda deal. One point though, please please PLEEEEEEEEEEEEEEEEZE ensure that the  file  GunBarrel20mm is in the Pilots folder, or else you will end up with a very odd looking aircraft ( this is for the 81C. )  I also swapped out the Cockpit, as the faux Spitfire one looked awful, so it is now the YAK 9 one instead, not accurate, as all the dials are in Russian, but it does look better.............Well in my humble opinion it does at least. All the sounds I used are in the sounds folder, including the sounds for the guns. 
      That as they say, is a wrap.
       
      I forgot to credit Starfighter, for the Yak Cockpit, apologies to him for that ommision.
       
      AS ALWAYS...........................ENJOY !!!        

      56 downloads

         (0 reviews)

      4 comments

      Updated

    2. PZL P11C REDUX

      PZL  P11C.
       
      A makeover of Zur's P11C, redone skins, for 3 Polish and 2 Romanian aircraft, updated sounds, weapons and of course the pilot. 
      Everything is included in the file, Sounds ( including the one for the guns) Guns, Weapons, Pilot, and of course the Decals.
      I was going to do Latvian, Hungarian, and Soviet skins, however as the Latvians and the Hungarians only had one aircraft each, I thought this rather pointless, as for the Soviets, they only had about four or five, I assume the Germans had a couple as well, but in reality, only Poland and Romania used the type operationally.
      These are NOT the DAT/A-TEAM aircraft, they were originally done by ZUR for SF1, the DAT ones are a totally different model and LOD.
       
      As always...........ENJOY .................... 

      58 downloads

         (0 reviews)

      0 comments

      Submitted

    3. SF2 P-51D/K Mustang by Crisis Remod Pack

      SF2 P-51D/K Mustang by Crisis Remod Pack       1/28/2024
      -For SF2, Any and All-
      Another 1stGen Salvage Project...
      This is an SF2 Remod of P-51D Mustang by crisis. Historically this was one of the first aircraft mods released for SF1 in approx 2008. While the model still has some issues (see "Notes"), it's fully functional, and has been upgraded for the SF2 environment. I believe this will be a complimentary aircraft for the stock 3W Mustang (and others).
      This mod is supplied with just about all the original skin sets I could find from the 1stGen SF mods section and from Marcfighters archive. Unfortunately, several were not up to snuff, with inaccurate coloration, or had painted-on markings that make it impossible to allow the use of the superb 3W decal system. Therefore several, while replicating the originals, are new builds. These were made from a new template, and it is included. These skin sets cover US Army Air Force (WW2 ETO), USAF (post-war), Korean War units for the USAF, RoKAF, SAAF, and Israeli Air Force directly post-WW2 and during the 1956 Suez Crisis.. Several of the included skins make use of decal sets I created for other mods, as you all know how I hate to waste good decals!!! :)
      You will find herein ...
      USAAF/USAF:
      362nd FS,357th FG (ETO) -1944 start date (NMF)
      375th FS, 361st FG (ETO) -Sept, 1944 start date (Camo/NMF/Invasion Stripes under wing/fues)
      "USAFSilver", Generic NMF -10/1947 start date
      12th FBS, 18th FBG (Korea) -1950 start date
      SAAF:
      2 Sqdn, SAAF "Flying Cheetahs" -1950 start date
      IDFAF:
      No.101 Sqdn (NMF) -1948 start date
      No.116 Sqdn Blue/Brown Camo (1956<) -Suez Crisis camo scheme
      RoKAF:
      51st PFS* (ROKAF) -Korean War. #18 is Col. Dean Hess' aircraft, with nose art
      *=Provisional Fighter Squadron
      98.6% of the markings are decals, with some small exceptions (see notes). Decal randomization is TRUE.
      While many skins had to be remade, some are still 'as issued' (un-retouched). All remain in bmp format. As is usual, serial numbers & 'plane in squadron letters' (WW2 & Korea) are as historically accurate as possible. Those fully 100% matched are marked with the star (*), those correct, but unable to match to a individual code letter are marked with the plus/cross (+), those with no mark are generic.
      For those units listed in the game's SquadronList ini, my (patent pending) 'fake SqTail' decal is used to activate their name displayed on the Loadout screen. The SF2 'date switch' is used for all services on their respective skin sets.
      Sounds and drop tanks are included. All weapons used are also included. If you End Users (tm) have the SF2I expansion that adds the Mustang and WW2 era weapon, feel free to edit the loadout ini to use those stock in-game 3rd Wire items. The data ini has been brought up, as much as possible, to current standards. The FM test drives as fully compatable with SF2.
      When in-game, you'll see
      P-51D/K Mustang (cr)
      on the Aircraft Selection dropdown. This "(cr)" will differenize this one from the 3rd Wire or Wolf357's (and variations thereof). This mod DOES (sorta) cover both the D & K variants, as there's very little (actual) difference between them (one built in Inglewood, CA -D; the other in Dallas, TX -K; albeit with a different prop). Canopy acutation uses the Standard Animation Keystroke (tm), Shift/0.
      As is always reccomended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. Also, give the "Notes" a browse, as it explains certain issues this model has, and the change logs.
      Good Hunting and Happy Landings!
      Wrench
      Kevin Stein
       

      93 downloads

         (0 reviews)

      0 comments

      Submitted

    4. FW-190A8R2

      FW 190A8R2, (similar to the FW190A8 but with more armor), this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 1 historical skin, the new pilot Luftwaffe (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default). It includes all the decals of the previous fw190 created by me.
      Hope you enjoy it, more info in the readme file.
      Sorry my English is bad

      197 downloads

         (1 review)

      1 comment

      Submitted

    5. SF2 WW2 Focke Wulf FW-190A-8 Pak

      SF2 WW2 Focke Wulf FW-190A-8 Pak
       
      -- Something for the WW2 ETO players --
      = For SF2, Full-4/5 Merged ( Full-5 Reccomended/Preferred) =
       
      *There is a possibility that this mod may work in SF/Wo* 1stGen game installs. However due to
      the excessive modifications made to fit into the SF2 environment, not all features will be
      avaliable.*
      *Note X2: this mod is designed for use =ONLY= in the ETO envrionment. Specific versions for use
      in the MTO will be released seperatly, if required*
       
      Mods, rebuilds, reskining/redecaling for Wolf's FW-190. This is the next of a series of FW-190
      upgrades, that will cover those models (while still based off Wolf's original LOD), that
      were/are available from the 1stGen SF/Wo* mods previously released. With required upgrades for
      SF2.
      This mod is designed to REPLACE any 1stGen variant you may have in your WW2 ETO intalls. It is
      reccomended you delete the aircraft and decals folders of the originals, as to NOT cause any
      conflicts with THIS mod.
      This package contains 2 variants of the FW-198A8 as deployed in Western Europe. Skins/Decals in
      this pak are:
       
      Fw-190A8R2:
      3/JG1
      JG300 (early, "Wilde Sau" night camo)
      JG300 (Late, splinter/mottle with blue/white/blue Riech Defense Band)
       
      Fw-190A8R8 "Strumbock":
      11/JG3 (from 1944 thru war's end)
       
      All Skins are in jpg format, and decal randomization is set to TRUE.
      A (semi) compliant SF2 FM was cobbled together from various sources. As always, while it works
      quite well, further fine tuning is required by Experten.
      Sounds, pilot figures and weapons are included, as well a new SF2 version of my "box art"
      Hangar and/or Loading screens.
      Please note, the engine sound in this one has been changed to the AVHistory BMW 801 sound. It's
      reccomeneded you make this change to the FW-190A-1 that was recently released. It's a VERY
      simple text edit.
       
      As always, fairly easy to follow, yet detailed install instructions are included. PLEASE read
      them!!! Also, the "Notes" section for other important stuff of interest. When discoverable, all
      original readmes are included for historical purposes.
      *Due to the age of the physical model (LOD), this mod is being released "as is"; PLEASE see the
      Notes section for more info*
       
      Dedicated to the memory of Bob "howling1" Hauser; a dedicated WW2 modder if there ever was one!
       
      Happy Hunting!
      wrench
      kevin stein

      463 downloads

         (2 reviews)

      2 comments

      Updated

    6. Spitfire Mk12 early & late

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA, project development, textures editing and decals
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      JeanBa : special credit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk12 early
      - Spitfire Mk12 late
       

      102 downloads

         (0 reviews)

      0 comments

      Submitted

    7. Spitfire Mk12

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA, project development, textures editing and decals
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk12
       

      244 downloads

         (3 reviews)

      0 comments

      Updated

    8. FW-190 D13

      FW 190D, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cabin with 4 historical skins, plus one without insignia, to fly it with the nation you want, the new luftwaffe pilot (there are 2 lods, one with glasses and one without glasses, by default the pilot wears glasses). I included all the weapons of the model F
      I hope you enjoy it, more information in the readme file.
      Sorry my English is bad
      TORNO.

      176 downloads

         (1 review)

      0 comments

      Submitted

    9. SF2 A-26C Invader Pak (Revamped) by Bobrock, Gerwin & Wrench

      SF2 A-26C Invader Pak (Revamped) by Bobrock, Gerwin & Wrench        3/5/2023
      = For SF2, Full-5 Merged (Reccommended/Preferred) =
      *Note: This a semi=major overhaul of the original A-26C released in 2013. Gerwin has reworked many aspects of the model, and THIS MOD WILL REPLACE ALL OTHER EARLIER VERSIONS!!!  You are advised to move, remove, or delete any other versions of this you have in any/all mod folders. This new packaging covers the WW2 and post-war time frame. *
      *Note: (again!) In 1947, the "A" for "Attack" designation was removed from use, and the A-26 Invader renamed to B-26 Invader (for Light Bomber Squadrons). Also, with the retirement of the Martin B-26 Marauder after WW2, the number was "open for reuse". However, the displayed name on the Single Mission screen will read "A-26C Invader"; as that's what it be. BTW, this is the GLASS NOSED bomber version, with working Norden bombsight. Instructional PDF included.
      The revamp is supplied with 3 skins:
      552nd BS, 386th BG, 9th AF ETO (1944 start date)
      13th BS, 3rd BG (<1950) Korean War Era
      Generic NMF for any time period (10/47 start date)
      All skins are "natural metal", some with painted on national or squadron markings. The Generic NMF marking are ALL decals, and carries post-1947 USAF markings. The serial/Buzz numbers =ARE= correct for this aircraft, but represent no particular unit. This is true for the WW2 skins serials as well. The SF2 "Date Switch" is active, and will change from the WW2 to the post-war skin in October 1947.
      Weapons are =NOT= included; all stock items are used.The engine sound are included, it's been switched to the AvHistory R2600 x2 wav. Each skin has its own Hangar Screen.
      This aircraft is also equipped with a fully functional bombsight/bombadiar position. Included is Kesselbruts pdf on "How To Use the Bombsight". I'd suggest reading it however many times it takes, and to practice, Practice, PRACTICE!!! using it on the Bombing Range Terrain.
       
      The canopy opens with the Standard Animation Keystroke (tm), Shift/0.
      When 'in game', you'll see
      A-26C Invader (BRG)
      on the Aircraft Selection Drop down menu. This, also, will help to differentiate the aircraft from any other Invader you may (or may not) have. It stands for "Bobrock/Gerwin" as they did the real heavy lifting.
      As always, fairly easy to follow, yet detailed install instructions are included. So, please read them. Also, give the "Notes" section a read too.
      Good Hunting!
      Wrench
      Kevin Stein
      from the KAW Team, circa 2013

      747 downloads

         (6 reviews)

      3 comments

      Updated

    10. FW-190F

      FW 190F, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 3 historical skins, the new luftwaffe pilot (there are 2 lods, one with goggles and one without goggles, the pilot with goggles is worn by default). and many weapons used by this bird (including the disposable wing tanks of the FW190G version)
      The F variant had the same blown canopy as the late versions of the FW190D series and is a specialized ground attack aircraft.
      I hope you enjoy it, more information in the readme file.
      Sorry my English is bad
      Torno

      211 downloads

         (2 reviews)

      1 comment

      Submitted

    11. Spitfire Mk6b / b Trop

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk6b
      - Spitfire Mk6b Trop

      124 downloads

         (2 reviews)

      0 comments

      Submitted

    12. Messerschmitt Me 262 Schwalbe

      The Messerschmitt Me 262 Schwalbe (English: "Swallow") of Nazi Germany was the world's first operational jet-powered fighter aircraft.Design work started before World War II began, but engine problems and top-level interference prevented the aircraft from attaining operational status with the Luftwaffe until mid-1944. Compared with Allied fighters of its day, including the British jet-powered Gloster Meteor, it was much faster and better armed.One of the most advanced aviation designs in operational use during World War II,the Me 262 was used in a variety of roles, including light bomber, reconnaissance and even experimental night fighter versions.
       
      Credits:
      Veltro2K for the aircraft
      Coupi for skins and decals
      Kesselbrut for the cockpit
      ??? for destroyed model; from 1stGen WW2 Terrains
      ??? for the jumo wav; renamed for one by Spillone? Ravenclaw? somebody I disremember (for a 1950 jet)
      Wrench, for some decals, some ini work, screens, and general "what do I do with this?" testing and such like.
       
      THIS MODEL IS ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL IT BE USED, EVEN IN PART OF ANYTHING THAT IS PAYWARE. IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT

      843 downloads

         (6 reviews)

      2 comments

      Submitted

    13. FW-190D

      FW 190D, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cabin with 8 historical skins, plus one without insignia, to fly it with the nation you please , the new pilot of the luftwaffe (there are 2 lods, one with goggles and one without glasses, by default the pilot has glasses). I included all the weapons of the F model (THE ER4 MULTIPLE LAUNCHER THAT BY ERROR I WAS NOT INCLUDED IN THE FW190F PACKAGE) even if this model only carries a bomb or 2 models of disposable tanks.
      I hope you enjoy it, more information in the readme file.
      Sorry my English is bad
      Torno.

      263 downloads

         (5 reviews)

      0 comments

      Submitted

    14. Short Stirling MK1

      Short Stirling MK1
       
      The Short Stirling was the first four-engined British heavy bomber of the Second World War. The Stirling was designed and built by Short Brothers to an Air Ministry specification from 1936, and entered service in 1941. The Stirling had a relatively brief operational career as a bomber, being relegated to second line duties from 1943 onwards when other four-engined RAF bombers, specifically the Handley Page Halifax and Avro Lancaster, took over its role, but fulfilled a major role as a glider tug and resupply aircraft during the allied invasion of Europe in 1944-1945.
       
      3D Model (Veltro2k)
      Textures and FM (Charles)
      Cockpit (Kesselbrut)
      Bombsight mod by MoonJumper.
      Best Sim : Thirdwire
      unzip ad folders to their appropiate places...have fun
       
      THIS MODEL IS ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL IT BE USED, EVEN IN PART OF ANYTHING THAT IS PAYWARE. IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT

      260 downloads

         (4 reviews)

      3 comments

      Updated

    15. SF2 WW2 ETO P-51B Mustang Pak

      SF2 WW2 ETO P-51B Mustang Pak
       
      -- Something for the WW2 ETO players --
      = For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =
       
      *Note: this mod pak is designed to REPLACE, in total, any other USAAF P-51B aircraft you have in your ETO-centric mods folders. You are advised to move, rename, delete or however you wish to do, to eliminate any Old Versions ™ you have.*
       
      This is a FULL aircraft pak, with (pretty much) all the trimmings. This pack contains 2 new skin/decal sets...
       
      355th FS, 354th FG "Pioneer Mustang Group"
      334th FS, 4th FG
       
      Both carry the standard OD/Neutral Gray finish with white ID bands. SKins are in jpg format, and decal randomization is set to TRUE. When discoverable, some nose arts are available.
      Many changes have been effected, they are listed in the 'ChangeLog', in the "Notes" section.
      Weapons (ok, drop tanks), pilot figures are included, and a NEW engine engine sound. New versions of the 'box art' style Hangar and Loading screens, now fully SF2 compliant.
       
      As always, fairly easy to follow, yet detailed install instructions are included. So, please read them. Wolfs original readmes, when discoverable, are included for historical purposes. Also, give the "Notes" section a read too.
       
      Good Hunting!!
      wrench
      kevin stein

      425 downloads

         (2 reviews)

      1 comment

      Updated

    16. Seafire Mk3 (2021)

      --------------- Seafire for CombatAce ---------------
      SF2 version 2021

      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Ravenclaw_007 : rocket ini
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. New rockets 3D models and new weapons system ini.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Seafire Mk3
      - Seafire L Mk3 w PTO skins
      - Seafire Mk3 hybrid (Air Spotting Wing)
      - Seafire Mk3 Irish Air Corp
      - Seafire Mk3 French Navy

      162 downloads

         (1 review)

      0 comments

      Submitted

    17. Seafire Mk1b & Mk2c (2021)

      --------------- Seafire for CombatAce ---------------
      SF2 version 2021

      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Seafire Mk1b
      - Seafire Mk1b w Vokes filter
      - Seafire Mk2c
      - Seafire Mk2c w Vokes filter
      - Seafire LF Mk2c
       

      107 downloads

         (0 reviews)

      0 comments

      Submitted

    18. Spitfire Mk5c Trop (2021)

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin, inis and decals.
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk5c Trop
      - Spitfire Mk5c Trop 4 cannons
      Note : Turkish and Egyptian decals folders are common to both Mk5bT and Mk5cT models.

      125 downloads

         (0 reviews)

      0 comments

      Submitted

    19. Spitfire Mk5b Trop (2021)

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk5b Trop
      - Spitfire Mk5b Trop w Aboukir filter
      Note : Turkish and Egyptian decals folders are common to both Mk5bT and Mk5cT models.
       

      116 downloads

         (0 reviews)

      0 comments

      Submitted

    20. Spitfire LF Mk5 b/c (2021)

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire LF Mk5b
      - Spitfire LF Mk5b Trop
      - Spitfire LF Mk5b Trop (Late French)
      - Spitfire LF Mk5c
       

      134 downloads

         (0 reviews)

      0 comments

      Submitted

    21. Spitfire Mk5 a/b/c (2021)

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021
      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk5a
      - Spitfire Mk5b (early)
      - Spitfire Mk5b
      - Spitfire Mk5c
       

      160 downloads

         (0 reviews)

      0 comments

      Submitted

    22. Spitfire Mk1 & Mk2 (2021)

      --------------- Spitfire for CombatAce ---------------
      SF2 version 2021

      TurboSquid : original 3D model
      Snapper21 : source file donated to CA
      Wrench : project development origin and inis
      Starfighter2 : original Spitfire Mk9 cockpit
      Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
      Cliff7600 : textures editing, decals and inis, cockpit editing.
      Thirdwire : textures and inis.
      These are the models made for CombatAce from the original TurboSquid 3D source file.
      It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.

      The models have been designed for a SF2 / ThirdWire use and nothing else.
      Not to be merged with other files sharing the same original 3D model.
      - Spitfire Mk1 (early)
      - Spitfire Mk1a
      - Spitfire Mk1b
      - Spitfire Mk2a
      - Spitfire Mk2a Long Range
      - Spitfire Mk2b

      260 downloads

         (0 reviews)

      0 comments

      Updated

    23. Avia B-35 fighter plane

      Czechoslovak pre war fighter which came too late in 1938
       
      Monty CZ

      286 downloads

         (2 reviews)

      2 comments

      Submitted

    24. BF109F-4.7z

      Messerschmitt BF109F-4 For Strike Fighters2
      Converted from Freeware model from FSX,By Me Russouk2004
      I havent the creators name just that its free to modify.
      Contents.
      Repaints.....
      All skins are painted by me,there was template,but I totally redid all panels,rivets etc...apart from some stencils.And some of the base textures.
      Versions................
      BF109F-2/4 Europe
      BF109F-4 Middle East/Scicily
      Captured BF109F-4\G  of RAF 1944\45
      BF109 Cockpit  Thanks Starfighter2
      BF109F-4
      Sounds
      Pilots
      Destroyed Model(109E)
      All Authentic Decals,and some actual aces and their a\c
      including...............................
      Hans Non Hahn StabI./JG3 Lutsk 1941
      Walter Nowotny 3.JG 54 "Grunherz"
      Oblt Hubert Mutherich 5/JG54
      Felix Sauer 6/JG53 1941
      Olt Otto Bohner 6/JG53 "Pikas" 1941
      ...........................................
      Required Files.....................
      WW2 Formations.ini which can be found in dowlnoad section.
      Guns and sounds if you havent already got them.........................
      https://combatace.com/files/file/11846-avhistory-ww2-guns-for-sf2/

      Drop Objects folder into your Mod folder and ok to overwrite..(take care to back up first if you have files of similar names)
      Damaged Lod goes into a\c main folder.
      Sounds Folder into main mod folder,allow overwite \or skip if have the files.
      Canopy Key  Shift_0 (zero)
      Templates to follow.
      This is freeware mod and cannot be uploaded to ANY site apart from here at Combatace.com unless permission sought.
      Hope you enjoy this mod ,took a few hours of work to get this done. Hope its worth it lol.
      Russouk2004(TM) 2021....

      331 downloads

         (0 reviews)

      2 comments

      Updated

    25. FW-190A8

      FW 190A8, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 3 historical skin and 2 clean so you can fly with the nation you like, the new luftwaffe pilot (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default).
      Hope you enjoy it, more information in the readme file.
      Sorry my English is bad
      Torno
       




      152 downloads

         (1 review)

      0 comments

      Submitted

Sign in to follow this  
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..