42 files
-
SF2NA Ultimate Carriers Pack
By eburger68
SF2NA Ultimate Carriers Pack
This package collects a large number of aircraft carriers available at CombatAce, puts them into one package with semi-standardized data tweaks, numerous error corrections, complete SF2NA conversions, and touched up or overhauled skins. Also included are several new carriers based on existing models. This package is thus designed as an ultimate one-stop shop for all carriers available at CombatAce, exclcuding USN and Soviet carriers.
Please note that there are no new models in this package. All models included here have been released before on CombatAce. Indeed, most (but not all) of carriers included here have been released previously with rudimentary SF2NA conversions applied.
So, why re-release these carriers in this package? This package brings several new things to the table, including:
- corrected DATA.INIs (basic ship data, catapult data, angled deck configuation, etc.)
- several tweaked or significantly overhauled skins
- indexed decal sets to represent various carrier classes
- several newly created individual ships (usually to represent particular carriers
at specific stages of their service lives)
The majority of the ships here are Royal Navy carriers, though you will also find carriers from Canada, Australia, India, the Netherlands, Italy, Spain, and France.
Please read the remainder of this ReadMe carefully, as important instructions regarding installation and use are included below.
~~~~~~~~~~~~~~~~~~~~~~~~~
What's Included
~~~~~~~~~~~~~~~~~~~~~~~~~
This package includes 34 different carriers, which are organized by carrier class or by nation (in the case of France, Italy, & Spain). Some of these carriers are set up to represent entire classes or partial classes, with decals indexed by ship number.
Please note that you may find several different versions of the same carrier, each configured to represent the same ship at a different stage of its service life.
There are also several fictional or "faux" carriers.
Colossus Class
--------------
\
R95 Arromanches
\
Colossus Class CVL [Colossus,Glory,Ocean,Venerable,Vengeance, & 5 others]
\
HNLMS Karel Doorman
Majestic Class
--------------
\
HMCS Bonaventure
\
HMCS Magnificent
\
HMAS Melbourne
\
HMAS Sydney
\
INS Vikrant
Centaur Class
-------------
\
HMS Albion
\
HMS Bulwark
\
Centaur Class CV [Centaur & Hermes]
\
HMS Centaur (Early)
\
HMS Hermes ('80s)
\
INS Viraat
Invincible Class
----------------
\
Invincible Class CVL [invincible,Illustrious,Ark Royal)]
Illustrious Class
-----------------
\
Illustrious Class CV (Early) [illustrious,Formidable,Victorious]
\
Illustrious Class CV [illustrious,Formidable,Victorious]
\
HMS Victorious (Post-refit)
Implacable Class
----------------
\
Implacable Class CV (Early) [implacable,Indefatigable]
\
Implacable Class CV [implacable,Indefatigable]
Audacious Class
---------------
\
HMS Ark Royal
\
HMS Eagle
\
HMS Eagle (Late)
Misc/Other
----------
\
HMS Eagle (1918)
\
HMAS Australia (fictional) [using SCB-125 model]
\
Merchant Aircraft Carrier
\
INS Vikramaditya
\
HMS Vindictive (fictional)
France
------
\
R91 Charles de Gaulle
\
Clemenceau/Foch Class CV [using SCB-125 model]
\
La Fayette Class CVL [La Fayette, Bois Belleau]
\
Mistral Class BPC [Mistral,Tonnerre,Dixmude]
Italy/Spain
-----------
\
R01 SNS Dedalo
\
C551 Giuseppe Garibaldi
~~~~~~~~~~~~~~~~~~~~~~~~~
Installation Requirements
~~~~~~~~~~~~~~~~~~~~~~~~~
All of the carriers included in this package are configured for use with "Strike Fighters 2: North Atlantic" (SF2NA). Thus, for any particular install you plan to use one of these carriers in...
- SF2NA must be part of the install base (even if other SF2 titles
such as SF2V or SF2E are also merged into the install)
- the game .EXE you use must be either the main SF2NA executable
(StrikeFighters2 NorthAtlantic.EXE) or a re-named copy of it in
the case of custom mod installs.
If you try to use these carriers in an install that does not conform to the above requirements, you will likely find your aircraft sinking into or falling through the carrier deck.
~~~~~~~~~~~~~~~~~~~~~~~~~
Installation
~~~~~~~~~~~~~~~~~~~~~~~~~
All of the files to be installed can be found in \To_Mods_Folder. The task of installing the various bits included here is fairly straightforward. For any particular install that you want to install carriers to, do the following:
1. Install the supporting files
Supporting files include all the files found in the following folders, which should be copied or moved to the corresponding folders in your Mods folder:
\Effects
\Flight
\Objects\Guns
\Objects\Weapons
\Sounds
Please note that the \Flight folder does include a new SOUNDLIST.INI. If your destination Mods folder already has a customized SOUNDLIST.INI, you can simply add the new entries from For_SOUNDLIST.txt (found in the root of this package) instead of overwriting your entire custom SOUNDLIST.INI.
2. Add the carriers
The carriers themselves can be found in the numbered directories (which are organized by class or nation). The carriers should be installed to \Objects\GroundObject in your Mods folder.
DO NOT simply grab all the numbered directories and drop them in the GroundObject folder, as they won't show up in game. Instead, you will need to drag and drop the particular carrier folders from within the numbered directories.
3. Add the decals
For any carriers that you install you should also install the corresponding decals, found in \Objects\Decals. Decals go to the same location in your Mods folder (\Objects\Decals). The decals folders for carriers are named the same as the corresponding carrier that uses them. Please note that there are a few carriers that do not have decals.
4. Install the LODs for Hermes & Viraat
We were not able to include the LOD files needed for the HMS Hermes ('80s) and the INS Viraat (which uses the same model as the Hermes). You will need to download the "Falklands '82 for SF2" package from CombatAce, which includes the necessary LODs:
http://combatace.com/files/file/13296-sf2-falklands-mod-redux/
When the download is unpacked, you can find the ncessary LOD files in this location:
\_For_SF2NA\Objects\GroundObject\Hermes
Copy the .LOD files to the folders for the the Hermes and Viraat, which are included in the \1c_Centaur_Class directory of this carrier pack.
Once the LODs are installed, make a COPY of the R12-R2b.LOD in each folder and rename it to R12-R2b_COL.LOD (this is the collision LOD for the ship).
* * *
That's it. You should be good to go.
If any carriers are not showing up properly in the game, that's because you didn't install them correctly. My advice will always be to review the steps above, consult the Knowlede Base at CombatAce.com for the relevant articles on installing mods to Mod folders, and try again.
~~~~~~~~~~~~~~~~~~~~~~~~~
Notes
~~~~~~~~~~~~~~~~~~~~~~~~~
A few notes about the carriers included in this pack.
1. Decal problems: many of the models included in this pack suffer from decal problems -- decal bleeding, mirroring, doubling, and occasional distortion. Although I have tried to minimize these problems as much as possible, you might see decals being inappropriately mirrored, often in a distorted fashion, in odd locations on some of these boats. Also, to minimize problems, I have occasionally positioned decals slightly forward or aft (or above or below) where they ideally ought to be.
2. Texture mapping problems: some of these models also suffer from texture mapping issues, which means that sometimes things just quite don't line up properly or aren't perfectly mirrored from one side of the boat to the other (because the texture map is effectively wrapped around the model in an odd fashion).
3. BPC Mistral: included in this package is an alternate skin for the BPC Mistral named FNGrey. I would have liked to make it the default, but discovered that the bridge area of this carrier is simply not mapped -- meaning that part of the island will always remain the default light blue. Also, decals will not show up properly on large parts of the hull, which means that I haven't been able to use them for the hull numbers of the three ships in this class. Thus, we're stuck the painted-on hull numbers for the lead ship of the class.
4. R91 de Gaulle: the model for this carrier is very poly heavy (I'm guessing because of the static aircraft and deck crew included). On some PCs game performance and frame rates might lag severely. As with the Mistral (from the same author), some parts of the model simply aren't mapped, which has limited what I've been able to do with the skin.
Finally, it's worth pointing out that many of the models included in this package date from 2004-2006. The oldest are seven or eight years old -- created during the first few years of the ThirdWire series. Although they still stand up fairly well, they are showing their age. Carriers (and ships more generally) seem to be some of their more difficult jobs that modelers can tackle in the ThirdWire series (along with cockpits), so we should be thankful that we have the models we do.
~~~~~~~~~~~~~~~~~~~~~~~~~
Credits
~~~~~~~~~~~~~~~~~~~~~~~~~
This mod package includes the work of several modders:
Hinchinbrooke .............. original models for all Royal Navy carrier classes,
except where noted below; La Fayette (old)
AlphaSim & A-Team .......... Hermes & Viraat
Aleks1 ..................... BPC Mistral & Charles de Gaulle
YEYEYE ..................... La Fayette & Dedalo
bobrock .................... Giuseppe Garibaldi
ThirdWire .................. HMAS Australia & Foch/Clemenceau
Zola25 ..................... skin for INS Vikramaditya
Wrench ..................... previous mods to many carriers included here
Paulopanz .................. previous mods to many carriers included here
The line drawings included in \_drawings are from ShipBucket.com or The-Blueprints.com.
If we have neglected to credit anyone here, please let me know. I will get it fixed ASAP.
---------------
Eric Howes
eburger68
12/19/2012
2,192 downloads
-
CVN-75 Harry S. Truman - Modern CVW-3
By SkateZilla
This Carrier Project Made its debut for Strike Fighters : Project 1 in March of 2006.
Since then three more versions were released for Thirdwire’s Gen 1 Titles.
There are a few more revisions done afterwards to the model for Gen 1 titles by other 3d artists in the Modding community.
This is Version 1.0 Gold of the current 3d Model, and has been extensively worked on to bring the quality and immersion level higher than in previous releases.
This will be the last version of this 3D Model released, work on a new model has begun that will allow me to bring the graphics detail up to higher standards with the newest features.
Carrier 3D Model : Skate Zilla
Carrier Textures : Skate Zilla (some textures borrowed from Stock CVA-63)
Weapons Systems : Skate Zilla (With assistance from Fubar512)
E-2C Static Model : Skate Zilla
E-2C Static Textures : Skate Zilla
F-18E/F Static Models : See Super Hornet Package PDF Readme
F-18E/F Static Textures : See Super Hornet Package PDF Readme
3d Carrier Crew Models and Textures: Julhelm
Carrier Systems Configuration: Skate Zilla
Carrier VisualFX : Skate Zilla
Testers (not including myself, Will be updated): EricJ, BlueFlame, Navy81, BlackShark61, PureBlue, Zola25, colmack.
Strike Fighters 2 Game Engine : Third Wire Productions
3d Content Creation Platforms : 3d Studio Max 7/2009/2011 (Discreet)
Texture Content Creation Platforms : Photoshop 7/CS5 (Adobe)
1,619 downloads
-
CVN Ulyanovsk
By Fubar512
CVN Ulyanovsk
by
Julhelm
This model represents the Soviet Project 1143.7 CVN Ulyanovsk, as it probably would have appeared had the project had been carried through to completion.
I won't go into the actual history of the ship, as it's just as easy for anyone so inclined to perform an online search and dig up all the relevant details on the vessel.
This model was designed and optimized for SF2:NA, and that means Windows Vista, Windows 7, or Windows 8. At the very least it requires the latest SF2 series patch for its systems and DX10 visual effects to work properly.
To install this package, simply place the folders located inside the .RAR archive into the mod folder of whichever SF2 title you desire the ship to appear in.
Additional work may be required on your part to ensure that the ship's TEWS RWR symbol (SkyWatch) is added to the RWR list of any aircraft so equipped. Instructions on how to do this, can be found on the SF2 knowledge base, courtesy of EricJ:
http://combatace.com/topic/44441-making-a-custom-tga-for-tews-radar-warning-recievers/
Sound effects will also require editing of the soundlist.ini file in order to work.
I’ve included a modified soundlist.ini file, for those who do not have it extracted.
Warning: Be careful if you already have an existing custom soundlist.ini file, as it will be overwritten. In that case, simply add the following lines (shown below), taking care to follow the existing numbering sequence (the soundlist.ini will reside in your flight folder). Use the supplied soundlist.ini as a guide.
SoundFileXXX=Underway
SoundFileXXX=ReductionGear
SoundFileXXX=CIWS
[underway]
Priority=Normal
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[ReductionGear]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=4
MaxDist=2000.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[CIWS]
Priority= Normal
Looped=TRUE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=2000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
Known issues:
1) The supplied SA-N-11 Kortik SAMs are not precisely scaled, so they were placed in the center of each Kashtan's missile tube cluster. They also do not have a defined booster stage in their model file, so don't expect booster separation. Also, the actual SA-N-11 is guided by an optical tracking system in real life. Again, this is not supported by the series, so they were given high counter-measure rejection and probability of intercept values, to compensate.
2) As of the present date (October 7 2012) Third Wire does not support a PROPER VLS system on a vessel that's also equipped with mutiple SAM types, on slewable mounts. To put it simply, one can have a working VLS system and nothing else, or one can have working Kashtans. I chose the latter option, though the nodes and missiles are supplied if this situation were to change in the future.
3) Third Wire has not made provisions for a working "ski-jump", so virtual bow catapults are used instead, and aircraft thus launched will appear to fly through the bow ramp.
Credits:
Ulyanovsk model, SA-N-9 model, and Textures for both, by Julhelm
SA-N-11 missile model and textures, based on the SA-19 by Gabilon.
Sound & Visual effects, and all data.ini work, by Fubar512
Testing by Dave, Wrench, Brain32 and Crusader.
1,229 downloads
-
Midway-Class Aircraft Carrier SCB-110
By Peugeot205
I proudly present you the well-known Midway-Class Aircraft Carrier SCB-110
What's in?
1) An accurate model of the Midway class aircraft carrier under the SCB-110 upgrade fully compatible with SF2NA standards
2) Updated campaign files for SF2 Vietnam adding this new carrier
Requirements:
Any stand-alone SF2 installation , although , SF2 NA and SF2 Vietnam are recommended.
Installation:
Just Drag it to the MOD folder and when it says overwrite , say yes to all.
Credrits:
Original 3D model: CJLivesey
3D Model modifications: FRPignon
Textures: CJLivesey, FRPignon and TK
HD textures: MigBuster
Data.ini: FRPignon and KJakker
Guns: KJakker
Have fun
FRPignon
845 downloads
- midway class
- coral sea
- (and 3 more)
-
LHA for SF2
By JSF_Aggie
****************************************************************************
*** LHA Assault Ship For SF2 ***
****************************************************************************
This is an update and repaint to Kesselbrut's LHA Assault Ship.
HrntFixr's HMLA 269 Cobra skin was used for the static Cobra's.
Please do not include in any payware mods.
****************************************************************************
*** Installation ***
****************************************************************************
Copy the contents of the LHA_SF2 folder into your SF2 MOD folder.
****************************************************************************
*** USE ***
****************************************************************************
Decals where included for the following ships, make sure "ShipNumber" is
correctly set:
LHA 1 USS TARAWA
LHA 2 USS SAIPAN
LHA 3 USS BELLEAU WOOD
LHA 4 USS NASSAU
LHA 5 USS PELELIU
AI aircraft do not use thrust vectoring, so there are workarounds used.
Catapults are used so they will get airborne, and arrestor cables are used
to get them back aboard.
The two parked AV-8B's are placed there via catapults 5 & 6. These
catapults have an infinate launch time. This means you have to have 6
members in your flight for them to show, and #5 & #6 will never take off,
unless you <ALT+N>.
Remove the two lines from LHA_DATA.INI if you don't want cat's 5 & 6:
SystemName[008]=Cat5
SystemName[009]=Cat6
"Carrier_Take-Off Harrier.MSN" is included as an example. You have to have
the stock VietnamSEA terrain and the AV-8B_da aircraft for the mission to
show up in-game.
Finally, some of the textures are extremely large. Down-size them if
needed.
Post at CombatAce if you have any other questions.
787 downloads
(4 reviews)0 comments
Updated
-
SF-2NA Ark Royal
By paulopanz
Hinch's Ark Royal SF-NA ready and working.
All credits to Hinchinbrooke as I made only some editings.
Inside the icluded readme You will have explain how to edit Buccaneers, Scimitars, Attackers, Sea Vixens and Sea Hawks for carrier operations.
Some escorts will follow. Stay tuned.
paulopanz
745 downloads
-
CVN Ulyanovsk
By Julhelm
CVN Ulyanovsk v1.0 for SF2
This is the cancelled Soviet nuclear carrier Ulyanovsk as it would have appeared had it been finished. Works fine in campaigns.
Uses a few big textures. If your computer can handle Ravenclaw's Buccaneer it can probably handle this.
Oh, and planes will generally launch through the skijump unless you use plenty of flaps. I tried having them launch diagonally but tbh either way looks as dumb. If you absolutely cannot live with it change the catapult ID's in the .ini.
Known Issues:
None that I know of.
Credits:
Model & textures by me except a few bits that were borrowed from TW CV-63 carrier.
These are: Catapult rails, deck trucks, railings and deck underside.
Custom FX and ini work by Fubar512
Disclaimer:
You MAY NOT use any part of this package in any payware package or otherwise take credit for it without first consulting me.
Any problems post on the combatace boards or mail to NilsD <at> bredband <dot> net
744 downloads
-
LHA mod for stock SF2NA version
By JSF_Aggie
*************************************************************************
***** LHA Mod For Strike Fighters NA *****
*************************************************************************
This is a mod to make the stock LHA from SF North Atlantic usable as an aircraft
carrier.
You must have SF North Atlantic for this to do anything for you.
*************************************************************************
***** Installation *****
*************************************************************************
Drop the contents of the "LHA" folder into the top level of your mod folder.
If you choose to, drop the contents of "Optional_Files" into the top level of
your mod folder as well. Details below...
*************************************************************************
***** Notes *****
*************************************************************************
For single missions and parked aircraft to work properly:
- A terrain with limited nations needs to have "USMC" as a FriendlyNation in
it's nations file. A modified ICELANDNA_NATIONS.INI is included
- If you're using Battle Groups in user-made missions, make sure the group's
nation is set to "USMC"
- For parked aircraft to show up, they must be "USMC" and have
"CarrierBased=TRUE" and "CarrierParkSpan=2.00" in their _data.ini. A
modified version of AV-8A_DATA.INI for Wrench's AV-8A is included.
- The first catapult has no effect, and requires you to use thrust vectoring
to take off. This also means your flight as to be limited to a max of 4,
or the 5th aircraft will crash on takeoff.
- AI aircraft don't use thrust vectoring to land, and must land with a fake
arrestor hook to come aboard. One is included in the modified
AV-8A_DATA.INI.
- This was tested with Wrench's AV-8A, and the _data.ini included
http://combatace.com/files/file/11938-av-8a-harrier-for-sf2/
*************************************************************************
***** Bugs *****
*************************************************************************
Non-STOVL, USMC aircraft, sometimes have the LHA defined as their home base, in
single missions. Setting "CarrierBaseSize=SMALL" for the LHA and
"MinBaseSize=MEDIUM" for the aircraft, does not prevent this. Maybe this is
something TK will fix for us.
741 downloads
(6 reviews)0 comments
Submitted
-
Essex class (long-hull) aircraft carrier
This model represents the long-hull straight-deck Essex class aircraft carriers, beginning with CV-14 USS Ticonderoga circa 1944. These ships were about 5 meters longer than the original CV-9 Essex, and featured heavier anti-aircraft armament.
Two versions of the ship are included: The original WW2 configuration, and the jet-capable Korean War era modernization. Decals for each unit are included. Random aircraft parking has been designed for currently available models with folding wings.
In addition to its complement of aircraft, each ship is armed with a battery of twin 5" guns and single 5" guns, plus a vast number of 40mm Bofors and 20mm Oerlikon anti-aircraft guns.
Please see the readme for full details and credits. Because this is a very high-poly, high-definition model, instructions are also included to improve framerate for those of us without premium supercomputers.
This model is dedicated to Wrench, who requested it, and who provides us with great playgrounds for all our toys.
691 downloads
-
CV HMS Victorious, R38 by Hinchbrooke for SF2
By Wrench
HMS Victorious (R38) Aircraft Carrier by Hinchbrooke
= For SF2, Any and All =
This is the aircraft carrier HMS Victorious as she appeared "post 1950s refit" until her retirement in the late 1960s. Originally released for 1stGens way back in 2005 and subsequently "lost" in the ether. Prompted by one of the CA members into looking for it, I scrounged through all my archive CDs (dating back to 2004) and actually located it. This will give our Fleet Air Arm guys someplace new to land on!
Some very small tweeks for SF2 (mostly to the radar statments for TEWS -but as she 'retired' in 1969, that's a bit moot).
As CVs are 'unvulnerable' in-game, her defensive armament is minimal (the same 2 guns that Hinch put on way back when), and mostly for show.
Also included, just for fun, are 2 missions set on the Desert map, using my SF2 mod of Skippybing's Sea Vixen. One is a take off, the other is landing. End Users can always change the aircraft and 'mission date' to fit whatever aircraft pleases you. They are edits of the stock SF2 carrier take off/landing missions, moved to a
different map and using Royal Navy equipment.
As always, READ the enclosed readme for fully detailed, easy-to-follow install instructions. Hinch's original readme is included, for historical reference purposes.
With thanks to Hinch for creating this, so long ago!
Enjoy!
wrench
kevin stein
688 downloads
-
Carrier Deck Illumination
By Fubar512
Carrier Deck Illumination Beta 1.0
Effects and .ini work: MiGbuster and Fubar512
Placement: MiGbuster
Technical Consultant: SidDogg
This mod DOES NOT contain the carrier models. It requires that you have Sf2V and/or SF2NA, and preferably both, installed on your system. The SCB-125 and CVA-63 models are native to SF2V. They are also included in SF2NA, which adds the CVN-68. We have included files for all three types.
To install: Simply drag the contents of the zip file, which are the two folders, "effects and groundobject", into the mod (saved games) folder of the desired title. For example, using SF2NA, the default path would be "YOUR NAME/Saved Games/Thirdwire/StrikeFighters2NorthAtlantic"
Note that this is a Beta, a work in progress, and as such, it is not perfect. Deck illumination is on all the time. The Optical Landing System is not-functional. These are currently due to the limitations of the series.
645 downloads
-
Clemenceau-class Aircraft Carrier (TMF)
By KJakker
This pack has The Mirage Factory's Clemenceau class aircraft carrier by Marcfighters with updated data files for use in SF2:NA installs by KJakker.
/------------------------------------------------------------------
There are two data file variants name Alt1 and Alt2. Alt2 is set by default.
The "Alt1" variant of the data files uses the gun included in the original SF1 mod set up for SF2 file structure.
The "Alt2" version is set to use an alternate gun made with data from sources avalible to me.
The both Guns have been included.
This file has been tested in SF2:NA.
Note that as this model has all 8 100mm gun mounts. As such the operational dates for the class in the Data and Names files are set to run from their Commissioning dates to the time of the classes mid to late 1980's air defense refits.
If Anyone has more precice info on when these refits started and finished please let me know.
/------------------------------------------------------------------
Insallation.
Backup the folders in your mods directory if you should happen to have the original.
Place the contents of the "To Mods Folder" in the corresponding folders in your mods directory.
You should not have any conflicts. If there are any they are most likly sound files. If you have a conflict just overwrite as you should be backed up.
/------------------------------------------------------------------
By Marcfighters and/or The Mirage Factory.
<-----LOD Files----->
clem.LOD
clem_desk.LOD
clem-001.LOD
clem-002.LOD
clem-003.LOD
clem.OUT
<-----Skin Files----->
Clemenceau.bmp
Clemenceau2.bmp
flag.bmp
Grade.tga
gray.bmp
clem.SHD
<-----Guns----->
100MM_ACAS
By KJakker
<-----INI Files----->
Clem-65.ini
Clem-65_Alt1_DATA.INI
Clem-65_Alt2_DATA.INI
Clem-65_NAMES.ini
<-----Guns----->
100MM_L55_M1964_C
100MM_L55_M1964_TF
<-----Skin File Edited----->
In Foch directory.
Clemenceau.bmp
By ThirdWire.
CV63_CATAPULT1.BMP
CV63_CATAPULT2.BMP
Source uncertain.
<-----Sound Files----->
Impact4.WAV
ShellWaterHit.wav
SmallExplosion.wav
TankGun.wav
/------------------------------------------------------------------
627 downloads
- clemenceau
- aircraft carrier
- (and 3 more)
(3 reviews)0 comments
Updated
-
Ark Royal v3 (R09)
By MigBuster
More detail added to skins and lights added.
Includes 2 different Deck styles.
See the Readme for info and credits
You need the full Ark Royal model from eburger68 (you just paste in this mod and overwrite):
http://combatace.com/files/file/13758-sf2na-ultimate-carriers-pack/
Tested in SF2NA only
622 downloads
(7 reviews)0 comments
Submitted
-
CVN-65 Enterprise (*)
By paulopanz
Here you get the SF-2 upgrade for YAP CV-65 post Vietnam
What's in:
- The Big-E full working in SF-2NA standards
Credits:
- YAP Carrier Pack II for original model (not icluded)
- paulopanz for SF-2 porting
- KJakker for V. 0.1 tweakings
- Snapper21 for V. 0.1 testings
Install:
- extract YAP Carrier Pack II
- copy CVN-65 in your mod Objects/GroundObject/ folder
- make a copy of CVN-65-02CC.LOD name it "CV-65_COL" and leave it in Objects/GroundObject/CVN-65 folder
- extract thIS pack
- copy all Objects folder in your mod folder and overwrite
Enjoy.
@ paulopanz
(*) This is NOT a complete pack: you must own YAP Carrier Pack II
619 downloads
-
SF2 KAW Independence Class CVL, USS Bataan
By Wrench
SF2 KAW Independence Class CVL, USS Bataan
= For SF2, Full-5 Merged (Full-5 Reccomended/Preferred) =
*Note: There is a distinct probability that this mod will =NOT= work properly in SF/Wo* 1stGen game installs. Due to data ini and other statements will =NOT= be in effect in 1stGen SF/Wo* at any patch level, it is NOT designed for use in SF/Wo*. It is designed for use in SF2NA, at the most CURRENT patch level. Your milage will vary!*
As promised....
This pak contains the INDEPENDENCE class CVL (light carrier), USS Bataan, used during the Korean War. The data ini herein includes eburger's fixes for the arrestor cables (thanks Eric!)
This ship is ONLY designed for use with the KAW mod.
It's fully compliant with SF2NA, having been tested in that envoriment. Names lists, data ini tweeks add the SF2NA radar statments, and other small adjustments.
All weapons (ok, the guns!) you should have already in you various mods folders, so they are NOT included.
BE ADVISED: it may/will cause a "strange" issues in game-generated single missions. I've detailed these in the "Notes" section below.
As always, fairly easy to follow, yet detailed install instructions are included. So, please -READ- them. Also, give the "Notes" section a read too for futher explinations, clarifactions, illuminations, credits, and so forth.
Happy Landings
wrench
kevin stein
529 downloads
(4 reviews)0 comments
Updated
-
(2 reviews)0 comments
Submitted
-
USS Midway Class 1985-1992
By guuruu
Midway class carrier 1984-1992
----------------------------------------------------
The latest version of famous carrier.
Model is mostly my job. I used some parts from other ships like
radars and CIWS.
Thank you creators ;-)
C R E D I T S
--------------------
Crusader - testing, DATA files
Coupi - testing. parked aircrafts
guuruu - all bugs
Installation:
-------------------
It will replace older CVA-41, so delete CVA-41 from your GroundObjects 1st.
Then just copy/overwrite files to your MODS folder.
*************************************************************************************************************
This is freeware; it CANNOT be distributed unless permissions are granted by myself.
The original readmes, if any, and all other pieces of the package MUST remain intact.
The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
This package and any part of it may NOT in any way, shape or form be used in any payware additions.
*************************************************************************************************************
THIS SHIP MOD OR ANY PART OF IT MUST NOT BE HOSTED OR
POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE WITHOUT MY EXPRESS
PERMISSION, OR USED FOR ANY OTHER PURPOSE THAN THIRDWIRE FLIGHT
SIMULATORS, AND MUST NOT BE SOLD OR OFFERED FOR SALE BY ITSELF
OR WITH ANY OTHER FILES OR MODS.
*************************************************************************************************************
Have fun
Wojtek
438 downloads
-
Aircraft Carrier "Kuznetsov" ex Kremlin Class
By Gepard
Aircraft Carrier "Kuznetsov" ex Kremlin Class
*****************************************************
This mod is made for SF2.
----------------------------------------------------------
I. History
Since the 50th the Soviet Navy tried to get aircraft carriers. But the political leadership denied all attempts to build such vessels. So the Admirality tried to get carriers through the back door. They declared such ships would be neccessary to hunt down american submarines. So the big ASW ships Moskva and Leningrad were built. But the design was terrible. Thatswhy the project 1143 was developed, better known as Kiev class.
The Kiev class was to small to operate conventional fix wing jets. So the ships were equipped with VTOL planes, the Yak-38. But this plane was no match for american or west european carrierbased planes. Thatswhy the flightdeck of project 1143.4 was made longer. The ship was named Baku. It was built for the supersonic Yak-41. A plan-B was to use the MiG-29K in the air group of the Baku.
The next step was to make the project 1143 ships bigger and longer. 1143.5 was launched in 1982. First named as Riga, then Breshnev, then Tblissi and in 1990 renamed into Kuznetsov.
When the USSR broke into parts the Kuznetsov was transfered to the russian North Fleet.
The sister ship 1143.6, Riga was renamed in 1990 into Varjag (Viking). It was not operational when it was was given to the Ukraine. The Ukraine had not had enough money to finish the ship. Thatswhy it was sold to China. China finished the ship, modified it and named it Liaonang.
-----------------------------------------------------------------------
II.
CREDITS:
This is a mod of the ship "Admiral Flota Sovetskogo Soyuza Kuznetsov", made by rokieborhgunder, which you can find here:
https://combatace.com/files/file/17091-admiral-flota-sovetskogo-soyuza-kuznetsov/
----------------------------------------------------------
III.
INSTALLATION:
-Unzip the folders into your SF2 mod folder
-------------------------------------------------------------
IV.
Known Problems:
The mod is not perfect. Eight gun turrets are not of the correct type. The gun barrels looking always in the wrong direction. The SA-9N missiles does not start from the silos, but from mid of the ship. The Ship to Ship missiles also start from mid of the ship.
----------------------------------------------------------
V.
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
VI.
The Kuznetsov and all other files are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
------------------------------------------------------
------------------------------------------------------------
Hope you enjoy it.
Michael (Gepard)
Made in Germany
May 2020
332 downloads
-
SF2 Independence Class CVL -Ver 2
By Wrench
SF2 Independence Class CVL by YEYEYE
= For SF2, Full-5 Merged (Full-5 Reccomended/Preferred) =
**** This is version 2.0, with fixed arrestor cables, and parking slots for the French ships. If you've downloaded the original, my apologies - You'll have to redownload, and when installing, just OVERWRITE the originals. ***
*Note: There is a distinct probability that this mod will =NOT= work properly in SF/Wo* 1stGen game installs. Due to data ini and other statements will =NOT= be in effect in 1stGen SF/Wo* at any patch level, it is NOT designed for use in SF/Wo*. It is designed for use in SF2NA, at the most CURRENT patch level. Your milage will vary!*
This pak contains the INDEPENDENCE class CVL (light carriers) of the US Navy during WW2
They are fully compliant with SF2NA, having been tested in that envoriment. Names lists, data ini tweeks add the SF2NA radar statments, and other small adjustments.
2 seperate, nationalized versions for the French Navy are also included (good for Suez and Indo-China with the recently re-released FN F4U-7 Corsairs and Hellcats).
PA La Fayette R96
PA Bois Belleau R97
All weapons (ok, the guns!) you should have already in you various mods folders, so they are NOT included.
BE ADVISED: if using these ships in the KAW mod -the USN Version- (and historically, only one was in Korean waters; USS Bataan), it will cause issues in game-generated single missions. I've detailed these in the "Notes" section below.
As always, fairly easy to follow, yet detailed install instructions are included. So, please -READ- them. Also, give the "Notes" section a read too for futher explinations, clarifactions, illuminations and so forth.
NOTE: Do NOT use this version for the KAW Mod!! A seperate versiion, modded by paulo, will be relased ASAP.
Again, my apologies!
Happy Landings!
wrench
kevin stein
Changes for Ver.2:
fixes for arrestor cables by eburger
fixes for parking slots (FN only) by paulopanz
added missing _COL.lod for USN version
318 downloads
(4 reviews)0 comments
Updated
-
Giuseppe Garibaldi FS2NA.rar
By colmack
A SF2/NA Up grade for BobRocks Giuseppe Garibaldi...
316 downloads
-
Admiral Kuznetsov Class Carrier
Admiral Flota Sovetskogo Soyuza Kuznetsov (Russian: Адмира́л фло́та Сове́тского Сою́за Кузнецо́в "Admiral of the Fleet of the Soviet Union Kuznetsov", originally the name of the fifth Kirov-class battlecruiser) is an aircraft carrier (heavy aircraft cruiser in Russian classification) serving as the flagship of the Russian Navy. She was built by the Black Sea Shipyard, the sole manufacturer of Soviet aircraft carriers, in Nikolayev within the Ukrainian Soviet Socialist Republic (SSR). The initial name of the ship was Riga; it was launched as Leonid Brezhnev, embarked on sea trials as Tbilisi, and finally named Admiral Flota Sovetskogo Soyuza Kuznetsov after Admiral of the fleet of the Soviet Union Nikolay Gerasimovich Kuznetsov. (Source : Wikipedia)
------------------------------
this mod is 2nd mod of Admiral Kuznetsov class carrier
and tested on SF2 patch 2012.
Lot of bug are fixed by
@rokieborhgunder @Gepard and
@KJakker
but still need to be fixed.
------------------------------
Known issues
- AK-630 CWIS not working
- ASM is not mounted
- Vertical SAM is not mounted
------------------------------
the 3d model is completely from Salvo (Sketch up) and its free then converted to TW model
and THIS MODEL IS FOR FREEWARE ONLY!
------------------------------
For more info or report any fatal bug, Feel free to chat me
------------------------------
Thanks to @Gepard @KJakkerThirdwire and Combatace
------------------------------
Credit :
Data Works
@Gepard , @KJakker
Model Work
@rokieborhgunder
315 downloads
-
Kiev Class Data File Mod/Update
By KJakker
This is an updated data file for the Stock Third Wire SF2:NA Kiev Class Soviet Carrier.
/------------------------------------------------------------------
The changes include improvements to the Kiev's CIWS and adjustments to all gunners on the ship.
The "Alt1" variant of the data file uses stock guns.
The "Alt2" version is set to use alternate guns which should improve the effectiveness of the guns in the AA and CIWS role.
The alternate Guns have been included.
This file has been tested in SF2:NA.
292 downloads
(4 reviews)0 comments
Submitted
-
SCB-125 Data File Update
By KJakker
This is an updated data file for the Stock Third Wire SBC-125.
Adjustments have been made to bring the [DetectSystem] entry in line with SF2:NA.
It has been based upon the data used by the TW CVA-63.
Also the four Mark 24 Mod 11 5 inch mounts for the 5"/38 Mark 12 guns are now operational.
As default they are set to use the stock TW "5IN_MK12"
An alternate optional 5 inch gun "5IN_38_MK12_AA" has been included. This gun has been adjusted to be more effective against aircraft.
This file has been tested in SF2:NA.
284 downloads
-
HMAS Australia R-22 (SCB-125 "What If..."
By Wrench
HMAS Australia R-22 (SCB-125 "What If..."
= For SF2, Full-5 Merged Reccomended and/or SF2NA =
*Note: Full-5 Merged reccomended, but can be used in any game with access to the SCB-125 Essex CVs at the April 2012 Patch Level*
A complete 'modernization' of the RAN "What If..." aircraft carrier HMAS Australia, as first seen in/on the Darwin (Modern) terrain.
The ship has been brought fully compliant with SF2NA standards (well, after all it IS just a small repaint and ini edit!). This will give the RAN players, with the DLC A-4G (or other pre-existing variants thereof), and any "What If..." RAN birds somewhere to roost.
As always, fairly easy to follow, yet detailed install instructions are included. Please read them!
Any/All faults, mistakes, etc are mine & mine alone. I didn't write up a backstory, but you can make up your own!
Be advised of some "oddities" when playing -- in other words, don't be surprised if you see USN aircraft on the deck! It's just how the game works, now, with carriers.
Happy Landings!
Wrench
Kevin Stein
272 downloads
(2 reviews)0 comments
Updated
-
SF2 "What If" Royal Navy Malta Class CVA
By Wrench
SF2 "What If" Royal Navy Malta Class CVA 4/5/2015
*For SF2 -ONLY-!! Full-5 Merged Reccomended*
This is a slight rebuild of Hinchbrooke's VINDICTIVE class 'what if' fleet carrier into an even more what if.
This represents the HMS MALTA class CVAs of the 1960s. (see Notes for 'historical notes'). All 4 ships of the class are represented.
As always, fairly easy to follow, yet detailed install instructions are included. PLEASE read them!!! Also, as usual, give the "Notes and Comments" section a read, too.
Happy Landings!!
Wrench
Kevin Stein
267 downloads
Sign in to follow this
Followers
0
-
Download Statistics