How can I set a new size for this window so it fits on my screen or scrolls to have it all Showing.

Thanks !

1) That you have installed the 1.26 patch - available in the downloads section of our site:

http://www.overflandersfields.com/Downloads.htm

2) If you are still having funnies - check the current issues that we have detected and are working on:

see this Forum section:

http://forum.combatace.com/index.php?showforum=208

If this covers your issue then please be patient we are working flat out on it!

3) If you are still having issues try reinstalling BH&H:

3.1) Go Start, Control Panel , Add Remove Programs and Remove P3 BH&H

3.2) Delete the CFSWW1 Over Flanders Fields Folder ( i.e delete any remnants) and all sub folders.

3.3) Install BH&H

See FAQ here for full step by step (important)

http://www.overflandersfields.com/FAQ.htm#Installation_and_settings

4) If your Trackir has stopped working after install of OFF P3 - Grab the latest drivers from Naturalpoint.com and reinstall TrackIR software.

5) If you are running on a non English OS and have the "Homefield Error" then set your OS to run Unicode English:

Update to V1.26 and then check the FAQ for more info (search for home field error).

6) Try a Reset of CFS3 - Goto Workshops and press the 'CFS3 Reset' button - this is particularly applicable if you upgraded from P2 to P3. (This will lose all your created pilots!)

7) Finally Read the FAQ!

http://www.overflandersfields.com/FAQ.htm

8) If after this you are still having problems please contact us on:

support@overflandersfields.com

Please note we need you to quote your order number, plus your system details as per the FAQ and we will assist you.

--

WM/Pol

OBD Support

And if anyone has experience with fsx, I'd love to fly that with three monitors, too.

Video card is AMD6850 with a second available. But from what I can tell the Crossfire isn't helping so I'm just keeping that one for backup.

I've just bought WOFF and there's a couple things I need to ask about that I haven't seen in the FAQ.

1. Is there any way to change the FOV in the game? Perhaps I've been spoiled by ROF but I find it to be much too narrow for me.

2. Is there any alternative to the snap view camera, such as mouse look or arrow keys look?

3. Is there any way to set a "default" view. What I mean is if I move the cockpit camera back is there a key or something I could do to keep it there whenever I look back?
 

Thanks in advance!

On my old one which in the end crashed I could not fly OFF, so it has been put aside for several years. Now finally installed again :-).
I now run OFF v1.0. Only I can't seem to change my graphic settings in the workshops :-/. So the resolution is plain awful :-(. Can someone tell me where it can be changed?

Also after so many years there gotta be some updates / patches.

I see now that there has been realised a WOFF, which is cool. Gotta get that one day.

Appreciate all the help.

Cheers

Loke

I'd like to change a few of my fellow pilot's names, but when I open the Pilot log file all I see is a bunch of random numbers symbols, and letters. It didn't look like this in OFF. What might I do to change my squadron pilot names? 

Thanks!

The issue is:

Previous drivers would always keep my ingame head's attitude as the reference for any subsequent movements whereas the TIR5 software seems to use the aircraft as its reference regardless where I'm looking. So if I'm looking to my left and want to look over the side of the aircraft I used to lean foward (as I would if I were looking out the window of my car). But now that simply moves my view toward the nose of the aircraft. To lean my view over the  side I have to move my head to the left, which would be like leaning back into the seat in real life. Likewise, when looking to the right rear the software used to compensate for that and reverse the direction of any lean. That is, if I then wanted to lean to the aircraft's right I would lean my head to its left (since they're reversed) and be looking down the right side of the fuselage. Since upgrading (?) to the TIR5 software this results in moving my view across the aircraft to its left side.

This situation has made playing any Track IR-enhanced game much less enjoyable (since it's a TIR5 problem), to the point that I rarely do any longer. I have the latest drivers and I've posted this on their forum, as had someone else before, without succcess. I was hoping someone here might have a solution. Or is this possibly because I'm using old hardware with new software and it doesn't happen if the player is using the TIR 5 camera and clip. I really don't want to have to spend another $150-$200 to start enjoying WOFF.

Check Six here. Long term (?) OFF: BH&H user, new to WOFF). I haven't done much flying for some time (other stupid things interrupted me (real life included), but I recently purchased and received WOFF by mail (DVD format).

I had recently upgraded to a new gaming PC (my ninja stealth beast is awesome, as it should be for the price - AUS$3200 without peripherals) and despite the fact I had WOFF DVD sitting on my desk, I didn't install it until I got my beast up and running.

I went for my first mission yesterday, and thought I'd best go back to training, as it had been a while, I couldn't remember many key bindings (and had since taken down my copy from the wall). I had also just reconnected all my joystick and rudder and TrackIR, and was not sure if they were working or not. So, old Capt Triggers took me up in the BE2, and I was a bit disappointed that I could not take the controls, because that was one of the reasons I was on this training mission. However, the scenery was beautiful, running seamlessly with no problems on maximum settings. My TrackIR worked just fine.

We landed, and I could not exit the aircraft. I tried every key and every combination to no avail. The ONLY thing that worked was my last resort - Ctrl+Alt+Del to the Task Manager to close the sim. Eventually I got to a screen telling me my flight was complete (it was complete 5 minutes ago!).

I have since chased up a key binding chart that tells me perhaps I should try Escape then Enter. I'll have a go at that tonight.

I loaded up Microsoft Flight Simulator X and tested my TrackIR again, and this time to see if my joystick and rudder pedals worked. Joystick yes, pedals no. At least I have the twisty joystick control in the meantime until I wrangle my pedals into life.

My new Specs you ask? I'll BRAG about them now, but someone will laugh at me in a few weeks time telling me it's obsolete.

Intel i7 4770 3.4 GHz/3.9 GHz CPU

Intel DH87MC ATX Motherboard

16GB RAM 480 GB Solid State drive, 2TB Hard drive

Gigabyte NVIDIA 3 GB GTX780 PCI Express Card

Creative SoundBlaster Recon 32 PCI Express

BENQ XL2420Z monitor

Saitek X-52 Joystick, Saitek Pro rudder pedals

Logitech G35 Gaming Headset

Logitech G-19 Gaming Keyboard

Logitech GX9 Gaming Mouse

Check Six (Steve)

Thought it might be helpful to share it here.

Hope you find it useful.

-mark

I was wondering if it was possible to reduce the intensity of force feedback during take-off so that my stick doesn't vibrate so heavily.

Any discussion on this might be useful to me before I underake experimenting.

[forcefeedback]

gear_bump_nose_magnitude=6000

gear_bump_nose_direction=18000

gear_bump_nose_duration=250000

gear_bump_left_magnitude=6000

gear_bump_left_direction=35500

gear_bump_left_duration=250000

gear_bump_right_magnitude=6000

gear_bump_right_direction=500

gear_bump_right_duration=250000

ground_bumps_magnitude1=3250

ground_bumps_angle1=8900

ground_bumps_intercept1=5

ground_bumps_slope1=0.48

ground_bumps_magnitude2=750

ground_bumps_angle2=9100

ground_bumps_intercept2=0.075

ground_bumps_slope2=1

crash_magnitude1=10000

crash_direction1=1000

crash_magnitude2=10000

crash_direction2=9000

crash_period2=75000

crash_duration2=2500000

stick_shaker_magnitude=5000

stick_shaker_direction=0

stick_shaker_period=111111

Best Regards;

I have only the download at this point but have ordered the DVD so I am hoping it will contain a manual that gives some guidance on settings and other things about the interesting flight simulation.  Thanks for any help.

Jim

If I have to install the MB what is the correct path string if I used previous installs of the MB.

Gary

plug_nickel

> EDIT <

              Never mind; found the answer in a post dated 2010.

End tag 'Unlimited pilots' does not match the start tag 'CFS3Pilot'.

Error on line 673,position 3 in file:c; documents and settings etc etc all the way to cfsww1 over flanders fields/UnlimitedPilots.xml.

Anybody got any idea what the heck this means? Oddly enough the game has worked fine the past two days I've used it. This is new, and I'd hate to have to delete all my old pilots to fix, but anyway. If anyone has some ideas I'd much appreciate it.

Many thanks,

ZZ.

The gun movement is mapped to my Ch Pro throttle, not sure of the name of the " wiggly button", but I'd like to change the assignment to my mouse. Can't find this assignment anywhere and I've looked a few times. What do I need to do?

I would like to know where the settings in workshop are stored. Are they in an editable file or in the registry?

Any help would be appreciated.

Best Regards;