Mach 3.4 = Fireball?

[WarlordATF 1]

I did some tweaking to my test raptor and as i hit Mach 3.4 at 36000 ft and my plane burst into flames. Anyone else run into this or is there something i need to adjust?

 

I only changed this section...

 

[FlightControl]

StallSpeed=56.59

CruiseSpeed=1088.00

ClimbSpeed=1600.48

CornerSpeed=771.6

MaxG=46.0

MaxSpeedSL=2366.8

MachLimit=8.6

PitchDamper=0.4

RollDamper=0.4

YawDamper=0.3

GunBoresightAngle=-1

RocketBoresightAngle=-5

 

I'm gonna try this at a higher alt and see if that makes any difference, but does anyone have any suggestions/ideas?

[Stick 773]

I did some tweaking to my test raptor and as i hit Mach 3.4 at 36000 ft and my plane burst into flames. Anyone else run into this or is there something i need to adjust?

 

I only changed this section...

 

[FlightControl]

StallSpeed=56.59

CruiseSpeed=1088.00

ClimbSpeed=1600.48

CornerSpeed=771.6

MaxG=46.0

MaxSpeedSL=2366.8

MachLimit=8.6

PitchDamper=0.4

RollDamper=0.4

YawDamper=0.3

GunBoresightAngle=-1

RocketBoresightAngle=-5

 

I'm gonna try this at a higher alt and see if that makes any difference, but does anyone have any suggestions/ideas?

 

 

yeah, done that;its something else- the airframe cant go through that kind of speed.

Ok this is a simulation, so anything is possible right?

 

CD0MachTableDeltaX=0.40

CD0MachTableStartX=0.00

CD0MachTableData=1.774,1.000,0.876,3.641,2.797,2.415,2.096

 

I think the answer is somewhere here though I cant interpret it.

[Dreamstar 3]

that happens with the Talon if you slam on the cans at altitude... fireball central

[Shin_kazama 0]

yeah, done that;its something else- the airframe cant go through that kind of speed.

Ok this is a simulation, so anything is possible right?

 

CD0MachTableDeltaX=0.40

CD0MachTableStartX=0.00

CD0MachTableData=1.774,1.000,0.876,3.641,2.797,2.415,2.096

 

I think the answer is somewhere here though I cant interpret it.

 

so where are these line located under so i can slam talon faster?

so those threee lines are what we need to tweak in order to increase mach speed?

[Stick 773]

[Fuselage]

ModelNodeName=Fuselage

Showfromcockpit=TRUE

MassFraction=0.391

HasAeroCoefficients=TRUE

CLa=0.0633

CL0=0.0090

CD0=0.0096

CDL=0.0005

Cmq=-0.0419

Cmad=0.0106

Cyb=-0.0465

CLaMachTableNumData=8

CLaMachTableDeltaX=0.40

CLaMachTableStartX=0.00

CLaMachTableData=1.000,1.000,1.000,0.901,1.072,1.248,1.405,1.516

CD0MachTableNumData=8

CD0MachTableDeltaX=0.40

CD0MachTableStartX=0.00

CD0MachTableData=1.123,1.000,0.990,1.179,0.997,0.889,0.793,0.727

CDLAlphaTableNumData=15

CDLAlphaTableDeltaX=4.00

CDLAlphaTableStartX=-28.00

CDLAlphaTableData=51.414,32.378,18.737,9.593,4.047,1.199,0.150,0.000,0.150,1.199,4.047,9.593,18.737,32.378,51.414

CmqMachTableNumData=8

CmqMachTableDeltaX=0.40

CmqMachTableStartX=0.00

CmqMachTableData=1.000,1.000,1.000,50.952,61.885,76.857,91.655,102.511

MinExtentPosition=1.572,3.485,0.902

MaxExtentPosition=-1.605,-7.005,-0.776

CollisionPoint[001]=1.5405,3.5990,0.7548

CollisionPoint[002]=-1.5604,3.5972,0.7548

CollisionPoint[003]=0.9350,-0.0000,-0.6499

CollisionPoint[004]=-0.8875,0.0000,-0.6504

CollisionPoint[005]=-2.1011,-0.2555,0.5921

CollisionPoint[006]=2.1006,-0.2699,0.5921

CollisionPoint[007]=-1.7641,-10.1820,-0.0240

CollisionPoint[008]=1.7128,-10.1820,-0.0240

CollisionPoint[009]=-788,-7.8893,-0.6907

CollisionPoint[010]=0.788,-7.8893,-0.6907

DamageRating=DESTROYED

SystemName[001]=Engine1

SystemName[002]=Engine2

SystemName[003]=FuselageFuelCell2

SystemName[004]=FuselageFuelCell3

SystemName[005]=FuselageFuelCell4

SystemName[006]=FuselageFuelCell5

SystemName[007]=FuselageFuelCell6

SystemName[008]=LeftMainGear

SystemName[009]=RightMainGear

SystemName[010]=Airbrake

SystemName[011]=Chaff_Station01

SystemName[012]=Flare_Station01

SystemName[013]=ECM

SystemName[014]=InternalGun

SystemName[015]=Intakes

SystemName[016]=LMSLStation1

SystemName[017]=LMSLStation2

SystemName[018]=RMSLStation1

SystemName[019]=RMSLStation2

SystemName[020]=CenterlineStationFT

SystemName[021]=Chaff_Station02

SystemName[022]=Flare_Station02

 

Those are the lines. There was this thread about making the Mig-29 faster... so my guess is it governs the fuselage resistance at high speed, if you increase the speed beyond what the fuselage can endure then Ka-boom, like the F-15 has a dash speed of Mach 2.54 but sustained speed is Mach 2.3.

Of course its just a hunch as it is beyond me to decipher those numbers.

[reb 0]

i tweak my f/a 37 talon to do mach 25 i think the problem is not on the Fuselage.....

[+Spillone104 553]

After some flight test with the NF-104 I've found that at high speed the engine overheat and explode causing the same problem as the Talon and Raptor.

So you have to edit these lines of the engine data:

 

[Engine]

ReferenceName=General Electric J79-GE-3B

SystemType=JET_ENGINE

InputName=THROTTLE_CONTROL

EngineID=1

HasAfterburner=TRUE

NumAfterburnerStages=4

SLThrustDry=44482.2

SLThrustWet=71171.6

ThrustAngles=0.0,-3.0,0.0

ThrustPosition=0.00,0.31,0.00

ThrottleRate=0.5

NozzleAnimationID=6

IdleThrottle=0.10

IdleRPM=0.66

IdleNozzle=0.90

CruiseThrottle=0.37

CruiseRPM=0.82

CruiseNozzle=0.25

MilThrottle=0.65

MilRPM=1.00

MilNozzle=0.25

MaxThrottle=0.78

MaxRPM=1.00

MaxNozzle=0.25

FullABThrottle=1.12

FullABRPM=1.00

FullABNozzle=0.90

AltitudeTableNumData=10

AltitudeTableDeltaX=3048.0

AltitudeTableStartX=0.0

AltitudeTableData=1.000,0.802,0.634,0.496,0.381,0.288,0.206,0.147,0.105,0.000

DryMachTableNumData=5

DryMachTableDeltaX=0.4

DryMachTableStartX=0.0

DryMachTableData=1.000,0.942,1.041,1.240,0.000

WetMachTableNumData=7

WetMachTableDeltaX=0.4

WetMachTableStartX=0.0

WetMachTableData=1.000,0.991,1.207,1.683,2.473,2.750,3.027

MaxInletTemperature=1120

GyroscopicInertia=

TSFCM0=0.843

TSFCM1=1.260

AfterburnerTSFC=1.970

MinFuelFlow=0.01

ExhaustEmitterName=DirtyExhaustEmitter

ExhaustPosition=0.0,-4.728,0.288

AfterburnerNodeName=afterburner

AfterburnerEmitterName=AfterburnerEmitter

MinExtentPosition=-0.67, 0.72,-0.42

MaxExtentPosition= 0.67,-5.61, 0.78

FireSuppression=TRUE

GasTempMaxRPM=600.0

GasTempIdleRPM=420.0

GasTempChangeRate=5.0

OverheatTemp=1760.0

DamageTempDelta=300.0

OilPressMaxRPM=30.0

OilPressIdleRPM=50.0

OilPressChangeRate=0.5

LowOilPress=12.0

LowOilTempDelta=400.0

 

These values are well over the real ones but permit to fly safe from exploding at high speed

[reb 0]

on the talon you must also change the values of overheat and maxinlet in the Scram jet Engines......

[+CrimsonRoamer 1]

on the talon you must also change the values of overheat and maxinlet in the Scram jet Engines......

 

 

The talon has about 20 engines though.

[New Guy 1]

Same thing happens with me. I tampered F-14's MaxSpeedSL and replaced the engines with F-15's to make it faster, and it went kaboom when in burner (at all altitude)

Not sure what caused it though...

[PaperArtillery 0]

Um...hate to be a LO-MAC player jumping into the wrong forum, but shouldn't Mach 3.4 be a fireball for any normal fighter anyways? The SR-71 reached Mach 3.2 and that was only at obscenely high altitudes...I doubt an F-14 or -15 would be able to get remotely close to that kind of speed without some major issues.

 

Although I guess the point of this forum is just for fun, so I can't complain.

 

[column5 62]

yeah, done that;its something else- the airframe cant go through that kind of speed.

Ok this is a simulation, so anything is possible right?

 

CD0MachTableDeltaX=0.40

CD0MachTableStartX=0.00

CD0MachTableData=1.774,1.000,0.876,3.641,2.797,2.415,2.096

 

I think the answer is somewhere here though I cant interpret it.

 

Zero-lift drag coefficient across a range of speeds beginning at 0.0 Mach and continuing in increments of 0.4 Mach. The values beyond 1.2 Mach are way too low.

[New Guy 1]

Zero-lift drag coefficient across a range of speeds beginning at 0.0 Mach and continuing in increments of 0.4 Mach. The values beyond 1.2 Mach are way too low.

 

I suppose it's the thing that happened with my F-14. My F-15 (still stock) are fine when I left it in burner for long