Jump to content
Sign in to follow this  
Leidgenosse

Alt+N, how to set altitude and speed to a specific aircraft

Recommended Posts

Okay, here we go... :biggrin:

 

Fact:

 

I downloaded the excellent ODS mod part 1-3 (Thanks to JSF_Aggie and all the folks behind :ok: ). There're two liners included, the E-3 and the E-8. Both aren't assigned for a specific mission type in single missions, so I changed the data.ini- entry so now I'm able to fly Recon- missions.

 

Problem:

 

If I hit alt+N(as default), the game "beams" me to the mission goal, right? Now, when I get beamed close to the mission target, I'm about 300+kts fast but only at ca. 3000ft.

 

Question:

 

Is it possible to set the flight level to 30'000+ft and raise the AGS in any data- file of the aircraft, or is just impossible to assign specific speed and flight level to an aircraft? :dntknw:

 

Thanks

 

 

De Leidgenosse

Edited by Leidgenosse

Share this post


Link to post
Share on other sites

Okay, here we go... :biggrin:

 

Fact:

 

I downloaded the excellent ODS mod part 1-3 (Thanks to JSF_Aggie and all the folks behind :ok: ). There're two liners included, the E-3 and the E-8. Both aren't assigned for a specific mission type in single missions, so I changed the data.ini- entry so now I'm able to fly Recon- missions.

 

Problem:

 

If I hit alt+N(as default), the game "beams" me to the mission goal, right? Now, when I get beamed close to the mission target, I'm about 300+kts fast but only at ca. 3000ft.

 

Question:

 

Is it possible to set the flight level to 30'000+ft and raise the AGS in any data- file of the aircraft, or is just impossible to assign specific speed and flight level to an aircraft? :dntknw:

 

Thanks

 

 

De Leidgenosse

 

I think you edit the values for that in the MISSIONCONTROL.INI file, extract it from one of the cat files in the flight folder if it is not already in there.

My section looks like this:

[Altitude]

Normal=9000

Low=1500

VeryLow=100

High=9500

VeryHigh=13000

 

When I alt N I find all aircraft are usually at 30,000ft. I think this alteration was reconmended with one of the Buff releases a while ago.

Edited by Kopis n Xiphos

Share this post


Link to post
Share on other sites
My section looks like this:

[Altitude]

Normal=9000

Low=1500

VeryLow=100

High=9500

VeryHigh=13000

 

So, when I see this, then I guess you can also assign the altitude, so the E-3/8 spawns at low/normal/high altitude, or does this change affect all aircraft.

 

Anyways, thanks for helping :wink:

Share this post


Link to post
Share on other sites
So, when I see this, then I guess you can also assign the altitude, so the E-3/8 spawns at low/normal/high altitude, or does this change affect all aircraft.

 

Anyways, thanks for helping :wink:

 

AFAIK the settings in the missioncontrol ini effect all the aircraft, normal will be the level that they appear during most parts of the flight through their waypoints, low level effects how low they will go during ACM I think, as does high altitude, I may be wrong though. Also I thought perhaps the low level effects the altitude that the AI drop weapons from but doesn't seem to be the case as my big bombers drop from 30,000 as soon as I tell them to. The only irritant is that when you fly as a stirke fighter, you don't always want to alt N to the IP as you will have a very steep decent into the target area before you can attack, my solution is to keep two seperate instances of the file and swap out the appropriate one as needed.

 

Also a word on setting the low altitude, if you fly on enemy skill level hard, this reduces the skill of your wingmen while increasing the AI so setting this value too low will result in more deaths by ACM to your AI flights, setting the enemy skill level to normal and reducing to 40 gives a better balance IMHO.

Share this post


Link to post
Share on other sites

Don't forget that the altitudes in the INI are in METERS....

Share this post


Link to post
Share on other sites
AFAIK the settings in the missioncontrol ini effect all the aircraft, normal will be the level that they appear during most parts of the flight through their waypoints, low level effects how low they will go during ACM I think, as does high altitude, I may be wrong though. Also I thought perhaps the low level effects the altitude that the AI drop weapons from but doesn't seem to be the case as my big bombers drop from 30,000 as soon as I tell them to. The only irritant is that when you fly as a stirke fighter, you don't always want to alt N to the IP as you will have a very steep decent into the target area before you can attack, my solution is to keep two seperate instances of the file and swap out the appropriate one as needed.

 

Also a word on setting the low altitude, if you fly on enemy skill level hard, this reduces the skill of your wingmen while increasing the AI so setting this value too low will result in more deaths by ACM to your AI flights, setting the enemy skill level to normal and reducing to 40 gives a better balance IMHO.

 

Yes, they affect all aircraft. The altitude levels are used to assign altitudes waypoints by combination of mission type and aircraft category. So as you've written bombers fly strike missions at (very)high altitude while fighters fly them at low/medium. Escort missions are flown at a bit offset alt above the altitude of escorted flight. Maybe very low/high altitude are boundaries for AI aircraft (they don't fly above or below them).

 

I would like to know where/if you can set this mission profile (eg. that recon missions in fighters are flown at high-low-high altitude)?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..