NATO Fighters III Released

[Rambler 1-1 9]

 

YEAH! I FINALLY USED THAT SUCKER!

[Luiz Carlos 0]

It will be possible to fly red campaigns?

[republic 0]

Thank you THANK YOU for your hard work. I wish there were a way to paypal all those involved in bringing this together. You all truly do deserve to be paid.

 

I am having one weird problem with the F-101C. Once you reach a certain angle of attack the aircraft 'snaps' to an even greater aoa and gets stuck there unless you apply massive down elevator. It does it both clean and heavy.

 

I've never flown the Voodoo in any TW game so I didn't know if that was an actual handling characteristic or if it's a bug.

[republic 0]

Just did some research and answered my own question. Thanks again for NF3!

[eddie01 7]

Thanks for this mod, appreciate all the work involved!

 

Wanted tp take a look at some of the models before I got started in the campaign. Took the F84 on a Fighter Sweep, with one wingman. After getting up to around 40 to 45 kts during takeoff, the canopy opens, and no combination of key commands will get it closed! Watched wingman takeoff, and he rolled off the runway at 200 kts, heading for town,lol Halfway through town he finally got airborne, and his canopy was open too!

 

Had clean install of WoE, Oct patch added, then installed NF1, NF2, then NF3. Flight model set to Hard, but still getting this problem with the canopy. At almost 300 Kts and at 12K feet, would think it would be kind of windy in that cockpit!

[topcat II 6]

Very excellent job to all Many thanks !!!!!

[hotrodss 0]

Thanks C5 for all your hard work, it is GREATLY!!! appreciated!

[manta972 0]

You have install NF1 + NF2 + NF3. ;)

 

Use this install order:

 

1. Wings Over Europe

2. October 2008 Patch

3. NF1

4. NF2

5. NF3

 

Each time, i have followed that same sequence WOE + patch then NF1, NF2, then NF3, and i have those same issues..no F16, no Jag, and white F104 ...

 

Cheers

 

M

[column5 62]

Thanks for this mod, appreciate all the work involved!

 

Wanted tp take a look at some of the models before I got started in the campaign. Took the F84 on a Fighter Sweep, with one wingman. After getting up to around 40 to 45 kts during takeoff, the canopy opens, and no combination of key commands will get it closed! Watched wingman takeoff, and he rolled off the runway at 200 kts, heading for town,lol Halfway through town he finally got airborne, and his canopy was open too!

 

Had clean install of WoE, Oct patch added, then installed NF1, NF2, then NF3. Flight model set to Hard, but still getting this problem with the canopy. At almost 300 Kts and at 12K feet, would think it would be kind of windy in that cockpit!

 

Damn, sorry that one slipped through. It seems a lot of the auto-open canopies are not working under the latest patch.

 

To fix, open F84-F_DATA.INI and find the [Canopy] entry. Just delete that whole entry and the problem should go away.

[column5 62]

Each time, i have followed that same sequence WOE + patch then NF1, NF2, then NF3, and i have those same issues..no F16, no Jag, and white F104 ...

 

Cheers

 

M

 

Hmm very strange. Are you certain that all of the packs are installing to the same location? Its almost as if NF1 and NF2 are not there...

[republic 0]

Manta,

 

Make sure that when you install NF1 and NF1 into a custom path you double check it after you select the folder. The NF1 and NF2 installers automatically add "Wings over Europe" at the end of whatever you select, and you'll probably have to delete that off to get it in the right location. I'm betting that's your problem. At least it was for me.

[eddie01 7]

Damn, sorry that one slipped through. It seems a lot of the auto-open canopies are not working under the latest patch.

 

To fix, open F84-F_DATA.INI and find the [Canopy] entry. Just delete that whole entry and the problem should go away.

 

Thank you for the tip!

[manta972 0]

Manta,

 

Make sure that when you install NF1 and NF1 into a custom path you double check it after you select the folder. The NF1 and NF2 installers automatically add "Wings over Europe" at the end of whatever you select, and you'll probably have to delete that off to get it in the right location. I'm betting that's your problem. At least it was for me.

 

Thanks for the information, i have checked...the problem was there !

Now everything id good

 

 

M

Edited March 16, 2009 by manta972

[Emp_Palpatine 501]

Same here, I add that problem too. Everything is fine now! Great add-on, as expected!

[+Dave 2,318]

Thank you THANK YOU for your hard work. I wish there were a way to paypal all those involved in bringing this together. You all truly do deserve to be paid.

 

I am having one weird problem with the F-101C. Once you reach a certain angle of attack the aircraft 'snaps' to an even greater aoa and gets stuck there unless you apply massive down elevator. It does it both clean and heavy.

 

I've never flown the Voodoo in any TW game so I didn't know if that was an actual handling characteristic or if it's a bug.

 

Its a handling characteristic. You entered into one of the many problems that the Voodoo faced. C5 replicated it very well. It wasnt an easy aircraft to fly.

[JediMaster 451]

I take it that is part of the "Sexplane" characteristic??

[column5 62]

I take it that is part of the "Sexplane" characteristic??

 

SEXPLANE SI TEH BIG POWERFULS PLANES JUST LIKE MY LIBBIDO!!!!!!!!!!!!!111

[Dagger1 7]

this is amazig gr8 work thx alot

[topcat II 6]

Hi C5 in NF 4 is this going to have carriers and missions???

[JediMaster 451]

Well if it didn't have any missions it wouldn't be that interesting, would it?

[column5 62]

Hi C5 in NF 4 is this going to have carriers and missions???

 

After looking at it I have decided not to include any. The map does not lend itself to it, and we are missing certain key aircraft and ships

[+Jug 99]

After looking at it I have decided not to include any. The map does not lend itself to it, and we are missing certain key aircraft and ships

Congratulations, C5, on NF3. Do you know the link here in CA the download is stored? Or do I need to come to your site?

[+Hans Topp 115]

Thanks for this magnific work, really great, thanks for all that have made this addon

[column5 62]

Congratulations, C5, on NF3. Do you know the link here in CA the download is stored? Or do I need to come to your site?

 

Thanks! Right now it is only at c5 (which is part of CA).

[Syrinx 13]

For anyone who isn't getting the decals to show up on the Javelin FAW9, please paste this into your decal.ini in the 85 folder in the JavelinFAW9 folder...let it completley overwrite your old stuff.

 

[Decal001]

MeshName=fuselage

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=JavelinFAW9/85/d/sn

Position=3.004,0.01

Scale=0.9

DecalMaxLOD=4

 

[Decal002]

MeshName=fuselage

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=JavelinFAW9/85/d/sn

Position=3.004,0.01

Scale=0.9

DecalMaxLOD=4

 

[Decal003]

MeshName=Wing_L

DecalLevel=0

DecalFacing=TOP

FilenameFormat=JavelinFAW9/85/d/

Position=-5.415,-3.506

Rotation=0.0

Scale=1.5

DecalMaxLOD=4

 

[Decal004]

MeshName=Wing_R

DecalLevel=0

DecalFacing=TOP

FilenameFormat=JavelinFAW9/85/d/

Position=5.415,-3.506

Rotation=0.0

Scale=1.5

DecalMaxLOD=4

 

[Decal005]

MeshName=vtail

DecalLevel=0

DecalFacing=LEFT

FilenameFormat=JavelinFAW9/85/d/85sqn

Position=-5.543,1.924

Scale=2.0

DecalMaxLOD=4

 

[Decal006]

MeshName=vtail

DecalLevel=0

DecalFacing=RIGHT

FilenameFormat=JavelinFAW9/85/d/85sqn

Position=-5.543,1.924

Scale=2.0

DecalMaxLOD=4

 

[Decal007]

MeshName=Wing_L

DecalLevel=0

DecalFacing=BOTTOM

FilenameFormat=JavelinFAW9/85/d/

Position=-5.415,-3.506

Rotation=0.0

Scale=1.5

DecalMaxLOD=4

 

[Decal008]

MeshName=Wing_R

DecalLevel=0

DecalFacing=BOTTOM

FilenameFormat=JavelinFAW9/85/d/

Position=5.415,-3.506

Rotation=0.0

Scale=1.5

DecalMaxLOD=4

 

[Decal009]

MeshName=Fuselage

DecalLevel=0

DecalFacing=LEFT

FilenameFormat=JavelinFAW9/85/d/roundel

Position=4.874,0.01

Rotation=0.0

Scale=1.0

DecalMaxLOD=4

 

[Decal010]

MeshName=Fuselage

DecalLevel=0

DecalFacing=RIGHT

FilenameFormat=JavelinFAW9/85/d/roundel

Position=4.874,0.01

Rotation=0.0

Scale=1.0

DecalMaxLOD=4

 

[Decal011]

MeshName=Wing_L

DecalLevel=2

DecalFacing=BOTTOM

FilenameFormat=JavelinFAW9/85/d/wsn

Position=-3.415,-2.506

Rotation=180.0

Scale=4.0

DecalMaxLOD=4

 

[Decal012]

MeshName=Wing_R

DecalLevel=2

DecalFacing=BOTTOM

FilenameFormat=JavelinFAW9/85/d/wsn

Position=3.415,-2.506

Rotation=0.0

Scale=4.0

DecalMaxLOD=4

 

[Decal013]

MeshName=vtail

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=JavelinFAW9/85/d/tc

Position=-5.543,1.124

Scale=1.7

DecalMaxLOD=4

 

[Decal014]

MeshName=vtail

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=JavelinFAW9/85/d/tc

Position=-5.543,1.124

Scale=1.7

DecalMaxLOD=4

 

[Decal015]

MeshName=intakel

DecalLevel=0

DecalFacing=LEFT

FilenameFormat=JavelinFAW9/85/d/intake

Position=3.004,0.01

Scale=3.0

DecalMaxLOD=4

 

[Decal016]

MeshName=intaker

DecalLevel=0

DecalFacing=RIGHT

FilenameFormat=JavelinFAW9/85/d/intake

Position=3.044,0.01

Scale=3.0

DecalMaxLOD=4

 

[Decal017]

MeshName=Fuselage

DecalLevel=0

DecalFacing=LEFT

FilenameFormat=JavelinFAW9/85/d/eject

Position=3.90,0.30

Rotation=0.0

Scale=1.5

DecalMaxLOD=4

 

[Decal018]

MeshName=Fuselage

DecalLevel=0

DecalFacing=RIGHT

FilenameFormat=JavelinFAW9/85/d/eject1

Position=4.40,0.30

Rotation=0.0

Scale=1.5

DecalMaxLOD=4