Jump to content
Sign in to follow this  

Recommended Posts

hello! This is my first post.

 

I'm flying essentially Navy, and feeling concerned to improve a little bit carrier ops. my first experiment is about AOA Indexers, parameters of thoses provided in stock aircrafts are totally unreliable. So I worked to make them usable for all Navy Skyhawks, Phantoms and Crusaders. nothing for corsairs actually sorry... So with this mod, you would be able to maintain correct AOA until the touchdown. Simply replace provided lines in each cockpit.ini and that's over!

 

Take care.

Fastergekko

 

 

A-4:

 

[AoAIndexerFast]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_fast

MovementType=LIGHT

//Slow (18.00 - 30.00)

Set[01].Value=06.97

Set[02].Value=27.79

 

[AoAIndexerOnSpeed]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_on_speed

MovementType=LIGHT

//OnSpeed (16.50 - 18.50)

Set[01].Value=05.36

Set[02].Value=07.50

 

[AoAIndexerSlow]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_slow

MovementType=LIGHT

//Fast (0.0 - 17.00)

Set[01].Value=-5.00

Set[02].Value=05.90

 

F-8:

 

[AoAIndexerfast]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_fast

MovementType=LIGHT

//Slow (13.75 - 30.00)

Set[01].Value=7.63

Set[02].Value=35.25

 

[AoAIndexerOnSpeed]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_on_speed

MovementType=LIGHT

//OnSpeed (12.25 - 14.25)

Set[01].Value=6.46

Set[02].Value=8.03

 

[AoAIndexerslow]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_slow

MovementType=LIGHT

//Fast (0.0 - 12.75)

Set[01].Value=-5.00

Set[02].Value=6.85

 

F-4:

 

[AoAIndexerfastLeft]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_fast_left

MovementType=LIGHT

//Slow (19.50 - 30.00)

Set[01].Value=7.00

Set[02].Value=35.21

 

[AoAIndexerOnSpeedLeft]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_on_speed_left

MovementType=LIGHT

//OnSpeed (17.90 - 20.10)

Set[01].Value=5.20

Set[02].Value=7.20

 

[AoAIndexerslowLeft]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_slow_left

MovementType=LIGHT

//Fast (0.0 - 18.50)

Set[01].Value=-5.00

Set[02].Value=5.40

 

[AoAIndexerfastRight]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_fast_right

MovementType=LIGHT

//Slow (19.50 - 30.00)

Set[01].Value=6.55

Set[02].Value=35.21

 

[AoAIndexerOnSpeedRight]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_on_speed_right

MovementType=LIGHT

//OnSpeed (17.90 - 20.10)

Set[01].Value=5.20

Set[02].Value=7.20

 

[AoAIndexerslowRight]

Type=ANGLE_OF_ATTACK_INDEXER

NodeName=indexer_slow_right

MovementType=LIGHT

//Fast (0.0 - 18.50)

Set[01].Value=-5.00

Set[02].Value=5.40

Share this post


Link to post
Share on other sites

Except, if I'm reading that correctly, you've got the values completely reversed.

 

Fast speed = Low AOA.

 

Slow speed = High AOA.

 

Actually, now that I look at it closer, (at least so far with the F-4 and A-7 and F-8), that though the symbology is correct in activation and position, the colors are jacked. The upper 'lower the nose/slow' chevron should be Red (currently Green), the lower 'raise the nose/fast' chevron should be Yellow (currently Red), and the 'on speed' donut should be Green (currently Yellow). At least, that's how I've seen it in aircraft...was there a time when the colors were different?

 

FC

Share this post


Link to post
Share on other sites

Well, crap.

 

Now that I've done more research, it seems that USN colors were in fact different and match what's in the sim.

 

But, the general activation positions are correct for all aircraft (ie it points 'down' when the AOA is high and points 'up' when the AOA is low).

 

FC

Share this post


Link to post
Share on other sites

Well, crap.

 

Now that I've done more research, it seems that USN colors were in fact different and match what's in the sim.

 

But, the general activation positions are correct for all aircraft (ie it points 'down' when the AOA is high and points 'up' when the AOA is low).

 

FC

I'm with you FC, every aircraft I've flown with an indexer was red/green/yellow from top to bottom.

 

Dels

Share this post


Link to post
Share on other sites

Ok, now I understand, I had real difficult time to interpret indications from the indexers while on the groove, I think that I was more looking at colors than a chevron position. Red means you're in danger and not everythings OK! that's why I reverted the light sequence. Well, I will take time to make corrections soon, reverting the sequence and change colors directly on texture files. Thanks FC

 

Fastergekko

Share this post


Link to post
Share on other sites

Okay it's done. Sob, my first mod...

 

All lights work now correctly in colors and positions. and all angles have been adapted for carrier use. It concerns all Navy Skyhawk, Corsairs, Crusaders and Phantoms, No USAF or IAF versions included so far. From my point of view, ILS Beam is by far too steep, and can't be followed to make correct approaches. but even by approaching via a less steep angle, nose is still too low. I assume that's because pilots position is too low too. I would like to rise it a little bit, but I'm affraid that will mess with cockpits.

 

The Mod is available here and any comments will be very welcome:

http://combatace.com/files/file/11812-sf2v-aoa-indexer-ver10/

 

Fastergekko

post-16846-050825500 1298989001.jpg

post-16846-007679500 1298989017.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..