more engine power and speed = fire help

[eatthis 0]

iv had a play with the data file for a plane in notepad adjusted engine power and plane mach speed now the engines set on fire within a minute or so what do i need to do?

[+Heberth 159]

can you post the "engine" here? so we can see what you done wrong...

[eatthis 0]

can you post the "engine" here? so we can see what you done wrong...

 

its my 1st attempt at any modding whatsoever im fumbling round in the dark

 

[Engine1]

ReferenceName=Bristol-Siddeley/Rolls-Royce 22R Mk400 Olympus

SystemType=JET_ENGINE

InputName=THROTTLE_CONTROL

EngineID=1

HasAfterburner=TRUE

NumAfterburnerStages=3

SLThrustDry=190230

SLThrustWet=300700

ThrustAngles=0.0,0.0,0.0

ThrustPosition=-0.758,-8.486,0.025

ThrottleRate=0.5

NozzleAnimationID=

IdleThrottle=0.10

IdleRPM=0.68

IdleNozzle=1.0

CruiseThrottle=0.37

CruiseRPM=0.82

CruiseNozzle=0.0

MilThrottle=0.65

MilRPM=1.00

MilNozzle=0.0

MaxThrottle=0.78

MaxRPM=1.00

MaxNozzle=0.6

FullABThrottle=1.12

FullABRPM=1.00

FullABNozzle=1.0

AltitudeTableNumData=10

AltitudeTableDeltaX=3048.0

AltitudeTableStartX=0.0

AltitudeTableData=1.000,0.802,0.634,0.496,0.381,0.288,0.206,0.147,0.105,0.000

DryMachTableNumData=4

DryMachTableDeltaX=0.4

DryMachTableStartX=0.0

DryMachTableData=1.000,0.980,1.172,0.000

WetMachTableNumData=7

WetMachTableDeltaX=0.4

WetMachTableStartX=0.0

WetMachTableData=1.000,0.991,1.207,1.683,2.473,2.750,3.027

MaxInletTemperature=40

GyroscopicInertia=

TSFCM0=1.195

TSFCM1=1.39

AfterburnerTSFC=2.0

MinFuelFlow=0.01

ExhaustEmitterName=olympusexhaust

ExhaustPosition=-0.758,-9.0,0.025

AfterburnerNodeName=

AfterburnerEmitterName=OlympusBurner

AfterburnerEffectSize=0.90

MinExtentPosition=-1.13,-3.68,-1.02

MaxExtentPosition=-0.14, 1.36,-0.04

FireSuppression=TRUE

GasTempMaxRPM=378.0

GasTempIdleRPM=420.0

GasTempChangeRate=1.0

OverheatTemp=33750.0

DamageTempDelta=83300.0

OilPressMaxRPM=35.0

OilPressIdleRPM=55.0

OilPressChangeRate=0.5

LowOilPress=12.0

LowOilTempDelta=400.0

HasArmor=TRUE

ArmorMaterial=STEEL

Armor[FRONT].Thickness=6

Armor

.Thickness=6

Armor

.Thickness=6

Armor[REAR].Thickness=6

Armor[TOP].Thickness=6

Armor[bOTTOM].Thickness=6

[+Heberth 159]

MaxInletTemperature=40

change to it:

MaxInletTemperature=800

good luck

[eatthis 0]

MaxInletTemperature=40

change to it:

MaxInletTemperature=800

good luck

 

 

nope same could it be speed related?

[+Heberth 159]

nope same could it be speed related?

 

it may be the speed.

 

however, this turbine is so powerful like that?

SLThrustDry = 190230

SLThrustWet = 300700

[+Dels 594]

Yeah, cadeteBRA is correct. You've used the pounds force value for the engine rather than the newton value as required in the game. Try these values for the Olympus 22R from Wikipedia:

 

SLThrustDry = 87200

SLThrustWet = 136200

 

Dels

[+logan4 845]

OverheatTemp=33750.0

DamageTempDelta=83300.0

 

That can be also out of range. Try to change it back to the original:

OverheatTemp=750.0

DamageTempDelta=300.0

[eatthis 0]

i

That can be also out of range. Try to change it back to the original:

OverheatTemp=750.0

DamageTempDelta=300.0

 

i fiddled with them to try to stop it setting on fire iv put them back and its the same

[+Florian 394]

Not sure on this, but maybe try this:

OverheatTemp=1750.0

DamageTempDelta=30.0

I suggest OverheatTemp is the temperature where the engine catches fire, while DamageTempDelta is the amount of temperature change. If you use 750 and 300 you have not enough "space" for the increasing temperature.

Also change the MaxInletTemperature to a higher value, maybe 1000.

[eatthis 0]

none of that made any difference whatsoever the only thing that worked was dropping the max speed :(

how do i add weapons and an internal gun?

 

how do i convert lbs thrust to in game thrust values?

[+Heberth 159]

none of that made any difference whatsoever the only thing that worked was dropping the max speed :(

how do i add weapons and an internal gun?

 

how do i convert lbs thrust to in game thrust values?

 

SLThrustDry = 87200

SLThrustWet = 136200

this is the right values.

I have some questions for you:

 

1=what plane it is with this problem?

2=at what speed and altitude that the turbines catch fire?

weapons and machine guns are basically editing the XXXdata. ini, but the model need have the pilons...

 

[Wrench 9,429]

several on-line converters will do the job of lbs thrust to newton meters. check google

[eatthis 0]

 

SLThrustDry = 87200

SLThrustWet = 136200

this is the right values.

I have some questions for you:

 

1=what plane it is with this problem?

2=at what speed and altitude that the turbines catch fire? weapons and machine guns are basically editing the XXXdata. ini, but the model need have the pilons...

 

 

the plane is a tsr2 but i want to make it a what if (long story)

basically it was all speed related altitude was irrelevant if i went above the standerd max speed then sooner or later it set on fire and exploded

 

i want to add an internal gun and pheonix missiles

 

(i also wanted to add canards like the su33 and longer intakes the shape of the f14 but iv no clue how to do that)

 

 

 

thanks for all the replies youv all been a great help :)

[+Heberth 159]

http://combatace.com/topic/64765-how-do-i-make-ask-somebody-else-nicely-to-make-a-what-if-mach-3-tsr2/

 

 

this is the what-if right?

[eatthis 0]

http://combatace.com...if-mach-3-tsr2/

 

 

this is the what-if right?

 

yup thats the 1

[Spinners 15,966]

 

how do i convert lbs thrust to in game thrust values?

 

x 4.5 is a rough approximation.