Jump to content

Recommended Posts

ok since my mirages are both getting an overhaul from outher modder and i cant seem to be still need to keep hand and mind busy i went to my back backup folder and draged these two from there.

i relese has betas some time soon and keep you guys updated on progress.

 

 

 

Eurocopter Fennec AS350

 

 

 

 

Mil Mi-2 armed version

Edited by cocas
  • Like 2

Share this post


Link to post
Share on other sites

Fennec update

i did watt i cloud whit the sight i cloud find good pics of only a fewe mount on the fennec.

 

 

 

images that cloud help imporve it his very welcomed

Share this post


Link to post
Share on other sites

last Fennec pic of the day im going to bed now my back hurt like hell

 

and something more .....................

 

Share this post


Link to post
Share on other sites

Fennec Sight Pics (best I can do)

 

The sight is called SAAB BT49 "HeliTOW" and is fitted to other helicopters too like the BO109 etc. Also it looks like the one you've modelled is the Demonstration Sight which is just an empty bit of Fibre Glass and is fitted for Air Shows etc (see picture 9) rather than the actual sight below. The actual sight has a flat face and rounded back (like a "D" when viewed fron above) and when flying the sight faces backwards to prevent damage to the glass (see pic 10) -

 

as550fennec_3.jpg

 

as550fennec_6.jpg

 

AS-550C-2_Fred+Willemsen.jpg

 

Fennec_7stor.jpg

 

Fennec_01.jpg

 

Fennec_05.jpg

 

fennec02.jpg

 

Bo_105CBS_HKP_9_SVD_18.jpg

 

****Rear of sight - Sights turned around whilst flying to avoid damage****

 

as550fennec_1.jpg

 

hkp9-20.jpg

 

***Airshow "Blank" fitted, just an empty Fibre Glass shell****

 

1679012.jpg

 

****More detail on the mounting plate below the sight with either Windows or Covers****

 

eurosat1744.jpg

 

fennec.jpg

 

h550mil6-2.jpg

 

Hope that helps!

Edited by ianh755
  • Like 1

Share this post


Link to post
Share on other sites

alot thanks i cloud not find those pics in google.

im going out this morning until this afternoon

so i can do much this morning more later this evening

Share this post


Link to post
Share on other sites

this watt i cloud do whit the sight using Ianh755 pics its the best i cloud whiout using drawings(modeling by eye)

im pretty happy whit it

Edited by cocas

Share this post


Link to post
Share on other sites

i have a lot helos wips i like helos alot armed most of all i never show them some have a lot HD time and very litle work time :lol:

i decide to show has i go work on them has feel like working them ther a long term WIPs unsell there a reat demand on this or that perticular helo.

today i felt like working on this litle bird here

 

 

today i completly redid the Fuselage and cut the glassees but there some work to go the most advanced his the Fennec that his on final details.

Share this post


Link to post
Share on other sites

Looks great, cocas! I especially love the detail on the rotor assemblies. Please keep up the good work; we need more helicopters.

  • Like 1

Share this post


Link to post
Share on other sites

modeling looks about done now just the need weapons pilon detail and rotors tgas thing and that it!

 

beta his coming soon!

Share this post


Link to post
Share on other sites

leaving the Fennec to cool off a fewe days better to find mistakes

so on to another one in this i ned some help!

i need some fotos of the main rotor assembly please on Ah-1G cobra

 

 

thanks in advance

Share this post


Link to post
Share on other sites

Here's what I could find, not the greatest and certainly no schematics but useable. Some is AH-1S but it shares the same transmission hub -

 

146%20rotor%20hub.jpg

 

AH-1S_70-15985_8976.jpg

 

AH-1_4_%20Vung_Tau.jpg

 

07BellAH1MainRotorHub.jpg

 

09BellAH1CobraRotorHub.jpg

 

BrownCobra-8.JPG

 

mrotor.gif

Share this post


Link to post
Share on other sites

working on the Cobra main rotor but going to some and a very cool head so progress wil be slow

Share this post


Link to post
Share on other sites

Fennec progress a large but how do i make the rotor turn properly

runway taxi and atitude his great btw

 

Share this post


Link to post
Share on other sites

You need to align the pivot so that the Y axis is pointing up through the rotor. All engines need to spin around the Y-axis.

 

Dels

Share this post


Link to post
Share on other sites

it worked thanks a lot Dels your are the man

a fewe tweaks and its ready to go for the painter!

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By dapit

      Hello everyone,
      If you have Combined Arms module, AND you are interrested in a Anti submarine Mission using S-3 Viking ;
      you might want to take a look at my mission here ;
      https://forums.eagle.ru/topic/288080-submarine-hunt-missionmini-game/
      But to get that picture, you will have to find it and successfully attack it.

      Have a good one...
    • By Trotski


      View File UH-1H HUEY (AFRICAN AND MIDDLE EASTERN )
      A TRIBAL GATHERING OF HUEYS
      AFRICAN AND MIDDLE EASTERN SKINS
       
      The second set in my collection of UH-1H Hueys, this pack consists of the following nations. Burkina Faso, Imperial Iran both Army and Airforce, Islamic Republic of Iran Army, Iraq, Israel, Jordan, Kenya, Lebanon, Morocco, Oman, Rhodesia, Uganda, Yemen, and finally Zambia. As with my previous upload, of Latin Hueys, everything is contained in this pack to enable you to plug and play , I must also add, as I failed to do so in my last upload, that enclosed are 2 DATA.INI files, one is the vanilla one, the other has the settings to allow the cargo net to be underslung, use one or the other, which ever flavour you prefer 
       
      Hopefully this upload is error free, however should you discover anything that my proof reader has missed please contact me and I will sack the bugger, and repair the damage !! 
      Thanks again to Yakarov79 for the original model of the UH-1H 
      As always, ENJOY 
      Submitter trotski00 Submitted 02/10/2021 Category Other Origin  
    • By Trotski
      A TRIBAL GATHERING OF HUEYS
      AFRICAN AND MIDDLE EASTERN SKINS
       
      The second set in my collection of UH-1H Hueys, this pack consists of the following nations. Burkina Faso, Imperial Iran both Army and Airforce, Islamic Republic of Iran Army, Iraq, Israel, Jordan, Kenya, Lebanon, Morocco, Oman, Rhodesia, Uganda, Yemen, and finally Zambia. As with my previous upload, of Latin Hueys, everything is contained in this pack to enable you to plug and play , I must also add, as I failed to do so in my last upload, that enclosed are 2 DATA.INI files, one is the vanilla one, the other has the settings to allow the cargo net to be underslung, use one or the other, which ever flavour you prefer 
       
      Hopefully this upload is error free, however should you discover anything that my proof reader has missed please contact me and I will sack the bugger, and repair the damage !! 
      Thanks again to Yakarov79 for the original model of the UH-1H 
      As always, ENJOY 
    • By Trotski


      View File SF2 Westland Wessex HU 5 (DAT)
      Westland Wessex Hu 5
      Royal Navy skin 
       
      A re work of the skin for the Wessex HU5 , the aircraft is originally from the A-Team site, so you will ( if you want to fly this aircraft ) have to obtain the files and lods from there, 
      This is a complete re do of the whole thing, as I was never happy with the colour, so I have corrected that, I have re drawn all the panels relatively accurately, I haven't bothered with rivet detail as to be honest it doesn't actually show up too well, I have corrected and updated ALL the stencilling, as the original effort was a dogs breakfast to be honest. I have also re done the decals and markings.
      So what is included.........2 skins, one for aircraft from 848 NAS who were the squadron in action during the Falklands operation, and one skin for 845 NAS flying off HMS Bulwark in 1966 during the Brunei and Indonesia debacle. I have included the decals for both Squadrons, and also the pilots that I personally use, although green helmets were more the flavour of the day during the Falklands, so feel free to swap out the pilots if that is your taste.
      A quick note about the shortfalls of these skins, the aircraft I believe was originally done for SF 1 so it is a little aged, therefore there are some clipping issues you may encounter, I am unable to do anything about this, in reality, we could do with a completely new model of this important aircraft, and hopefully one day it will happen !! So pretty much I have made a silk purse from a sows ear here, the aircraft itself. looks a little "off" I am sure there are some dimension errors, it doesn#'t seem tall enough, and it looks a little bit odd from the front view.....but I could of course be wrong, and the thing is perfect, but I doubt it. The stuff we all are getting used to like working lights and hatches......yeah ok.......not happening on this model, and I forgot to make lights work at least....oh well, such is life !! 
      Hopefully I shall do some skins for RAF HC3's next so watch this space for those.
       
      As always, ENJOY !! 
      Submitter trotski00 Submitted 03/08/2020 Category Other  
    • By Trotski
      Westland Wessex Hu 5
      Royal Navy skin 
       
      A re work of the skin for the Wessex HU5 , the aircraft is originally from the A-Team site, so you will ( if you want to fly this aircraft ) have to obtain the files and lods from there, 
      This is a complete re do of the whole thing, as I was never happy with the colour, so I have corrected that, I have re drawn all the panels relatively accurately, I haven't bothered with rivet detail as to be honest it doesn't actually show up too well, I have corrected and updated ALL the stencilling, as the original effort was a dogs breakfast to be honest. I have also re done the decals and markings.
      So what is included.........2 skins, one for aircraft from 848 NAS who were the squadron in action during the Falklands operation, and one skin for 845 NAS flying off HMS Bulwark in 1966 during the Brunei and Indonesia debacle. I have included the decals for both Squadrons, and also the pilots that I personally use, although green helmets were more the flavour of the day during the Falklands, so feel free to swap out the pilots if that is your taste.
      A quick note about the shortfalls of these skins, the aircraft I believe was originally done for SF 1 so it is a little aged, therefore there are some clipping issues you may encounter, I am unable to do anything about this, in reality, we could do with a completely new model of this important aircraft, and hopefully one day it will happen !! So pretty much I have made a silk purse from a sows ear here, the aircraft itself. looks a little "off" I am sure there are some dimension errors, it doesn#'t seem tall enough, and it looks a little bit odd from the front view.....but I could of course be wrong, and the thing is perfect, but I doubt it. The stuff we all are getting used to like working lights and hatches......yeah ok.......not happening on this model, and I forgot to make lights work at least....oh well, such is life !! 
      Hopefully I shall do some skins for RAF HC3's next so watch this space for those.
       
      As always, ENJOY !! 
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..