Jump to content

Recommended Posts

In a two seater airplane,when you start to copilot seat,how do you change/switch to pilot?Haven't find anything.

Share this post


Link to post
Share on other sites

you're always in the PILOT seat. The game doesn't support anything else  No station shifting can be done (with 2 exceptions, and the cockpits were built that way)

Share this post


Link to post
Share on other sites

The F-5F (SF1) comes with dual cockpits, you can set these to Front or Rear in the F-5F.ini file.  Not sure if the SF2 version has this feature.

 

 

post-65346-0-54442000-1430125443_thumb.jpg

post-65346-0-48233400-1430125445_thumb.jpg

Share this post


Link to post
Share on other sites

How do you change station?At the "LTV A-H/E & TA-7H/C Corsair II Polemikì Aeroporìa (HAF) pack 1.0" you start at the back seat.How do you change to front seat so you can see the HUD etc?
I mean I cannot find any controls although I remember you can do it.

Edited by GMagos

Share this post


Link to post
Share on other sites

The problem I guess is that they are training aircraft and this is why you can not switch to front seat.

Share this post


Link to post
Share on other sites

because, as I said, you can't.

the cockpit LOD itself has to be built with the capability. Not many cockpit builders bother with it, as it's a pretty useless function, and requires dozens more hours of work, to little reward.

  • Like 2

Share this post


Link to post
Share on other sites
On 4/27/2015 at 2:15 AM, LeL said:

 

 

well here is a quick fix of F-5F front seat view issue

you have 4 cockpit files in F-5F aircraft folder

F-5FFront_Cockpit

F-5FFront_Data

F-5FRear_Cockpit

F-5FRear_Data

 

all you have to do is to select all / copy everything from inside front cockpit and front Data and then paste it into Rear Cockpit and Rear Data by select all and erasing previous data in Rear Cockpit and Rear Data files 

 

thats it now you will fly from front cockpit seat

Note: but then you cant switch to 2nd seat again , only if you extract original files again in your F-5F folder 

Edited by Wrench

Share this post


Link to post
Share on other sites

Another necro ressurecting? What's going on??

  • Haha 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By GKABS


      View File Jet Pilot SF1
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      New Pilot model
      All my files should include the Strike Fighters 1 Series game file (.LOD) and the texture required.
      This is for Strike Fighters 1 Series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
      [Pilot]
      PilotModelName=GK-Pilot     <----
      PilotHeadNodeName=GK-Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=GK-Pilot1    <----
      PilotHeadNodeName=GK-Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Big thanks to Crawford for sending me the required MaxExporter_Max2009 and for testing the file in SF1.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Submitter GKABS Submitted 01/12/2020 Category Pilot Mods  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      New Pilot model
      All my files should include the Strike Fighters 1 Series game file (.LOD) and the texture required.
      This is for Strike Fighters 1 Series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
      [Pilot]
      PilotModelName=GK-Pilot     <----
      PilotHeadNodeName=GK-Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=GK-Pilot1    <----
      PilotHeadNodeName=GK-Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Big thanks to Crawford for sending me the required MaxExporter_Max2009 and for testing the file in SF1.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
    • By GKABS


      View File 3 Russian Pilots
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      3 new russian Pilot models
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      This is for the SF2 series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot too.
      [Pilot]
      PilotModelName=XXX                     <---- replace the XXX with the .old file name for the pilot
      PilotHeadNodeName=GK_Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=XXX                     <---- replace the XXX with the .old file name for the pilot
      PilotHeadNodeName=GK_Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Submitter GKABS Submitted 05/01/2020 Category Pilot Mods  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      3 new russian Pilot models
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      This is for the SF2 series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot too.
      [Pilot]
      PilotModelName=XXX                     <---- replace the XXX with the .old file name for the pilot
      PilotHeadNodeName=GK_Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=XXX                     <---- replace the XXX with the .old file name for the pilot
      PilotHeadNodeName=GK_Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
    • By GKABS


      View File Jet pilot
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      New Pilot model
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
      This is for Strike Fighters 2 Series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
      [Pilot]
      PilotModelName=GK-Pilot     <----
      PilotHeadNodeName=GK-Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=GK-Pilot1    <----
      PilotHeadNodeName=GK-Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Submitter GKABS Submitted 01/10/2020 Category Pilot Mods  
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..