YAP3 on SF2

[swell 0]

Hello,

 

I know that some people in this forum did manage to install sucessfully, YAP3 on SF2.

 

Im trying too but I need some help if you can,

 

On Da Nang airbase the ramp on the other side of the airbase never shows, the buildings, the hangars, the rivets are there, but the floor isn´t.?!!

 

I try to isolate the problem via targets.ini and types.ini and the problem seems to be with the TargetType ramp, which is conected with the ground_platte3.lod

 

[TargetType230]

Name=Ramp

FullName=Parking Ramp

ModelName=ground_platte3.lod

TargetType=MISC

ActiveYear=0

TargetValue=1000

UseGroundObject=FALSE

DamagePoint=140.0

ArmorValue=0.0

ArmorType=0

RepairRate=10.0

StartDetectChance=100

StartIdentifiedChance=50

IncreaseDetectChanceKey=10

MaxVisibleDist=30000.0

ZBufferOffset=6.000000

FlatObject=TRUE

DamagedModel=

DestroyedEffect=

DestroyedModel=

SecondaryChance=0

 

Anybody knows why this target appears on WOV a don´t on SF2?!?

 

Thanks to all

[+Soulfreak 6,351]

You have to add every object to the types.ini of the terrain where you want to add the target area.

Check Knowledgebase for deeper Informations. 

[swell 0]

Thanks 7eleven!

 

Yes I already did that and already check if ground_platte3.lod is in the terrain...but no joy :(

 

It´s possible that SF2 reads ground_platte3.lod in a diferent way than WOV??

[stuntman 170]

Weird. I have to check, but I think there is no issue on my WAP SF2 install. I'll let you know

[stuntman 170]

Weird. I have to check, but I think there is no issue on my WAP SF2 install. I'll let you know

Ok, so it looks alright on my install, as well as in Target Area Editor (a great tool by Mue: http://combatace.com/topic/85827-wip-target-area-editor ).

Download this tool here in combatace, open your vietnamSEA.ini file, and look for Da Nang air base in the upper left panel. See if Da Nang looks as it should be.

 

Also, in your target.ini file, look for:

[TargetArea091]

Name=Da Nang Air Base

 

under the mention Target[269], you should find this:

Target[269].Type=Ramp

Target[269].Offset=-500.00,310.00

Target[269].Heading=90

 

PS: also, i'll send you via PM my vietnamDATA.ini. Make a backup of your file, try mine and see if this change anything, just in case...Beware that I am using a bunch of files from stary's tiles, so you might miss a few TGAs

Edited February 1, 2016 by stuntman

[swell 0]

Thanks stuntman and thanks to all,

 

After much trial and error, following your advices I found out that in my Target.ini there was two entries for the ramp object.

I delete the one that not belong to the  ground_platte3.lod and the scenery shows completed.   

 

Now I,m on the phase of populating Da Nang Airbase with ground crews,

 

Any advise??

[Wrench 9,461]

well, since it's a payware mod ... one must be VERY carefull. They defend they're copyrights/property strongly.

 

 Inis can be uploaded, if that's the point of the exercise, but no other parts.

 

One must be VERY carefull with "property rights" when modding any payware item