Sign in to follow this
Followers
0
WW2 Install CTD help!
By
Spudknocker, in Thirdwire: Strike Fighters 2 Series - General Discussion
-
Similar Content
-
By 76.IAP-Blackbird
Dear Friends,
Today we'd like to tell you about the new Great War aircraft that are in development.
While transferring them from our classic project Rise of Flight to IL-2 Great Battles, we are fixing problems we found during this work - sometimes there are some asymmetric aerodynamic elements, a wrong object hierarchy, engine overheating/overcooling, and other similar problems.
For example, while working on the Airco DH.2 recently, we found problems - it had an invisible "ghost" stabilizer in the physical model, inconsistencies in drag values, and it was also missing its top speed - judging by the reference data, it was missing it by about 15 kph. Well, mistakes happen, and they will be corrected: the DH.2 in FC will have recalculated drag values, corrected handling, and an increased top speed. Soon the beta testers will try it out, and some additional changes may be in order after these tests.
Its AI will also be updated as it needs to be taught how to use its blip switch for taxiing (such early flying machines had no throttle and the engine always ran at full power - its pilot had to press and hold a blip switch button that cut the ignition when he wanted to slow down).
Another upcoming aircraft, the Sopwith Pup, also had some problems with its flight characteristics and engine, which are currently being corrected.
While working on Flying Circus aircraft, we are not only adding new features thanks to the IL-2 Great Battles engine but also fixing old problems whenever we get the chance. The new Flying Circus aircraft pack is scheduled for release this summer.
-
By 76.IAP-Blackbird
Dear friends,
Today we'd like to inform you about the upcoming update 5.203. In this update, the AQMG (Advanced Quick Mission Generator) mode will be greatly expanded. New mission types will be added: glider towing to the Normandy and Rhineland maps and artillery spotting and balloon defense to the Western Front WWI map. But the most significant addition will be made to the detailed map of Prokhorovka.
Tank Crew will now have a completely new mode that wasn't available before - Ground Forces AQM. Just like its aerial counterpart, it will allow you to choose a specific mission type that will affect the composition and positions of your forces: Strongpoint Defense, Enemy Strongpoint Attack, Breakthrough, and Enemy Rear Area Attack. You'll be able to set an initial distance from the enemy (since ground vehicles are very slow compared to aircraft), the strength of your force, the enemy force, and air support.
Other changes in this update include the correction of the distance at which nearby aircraft can be heard, further updates to the Lightning Strikes, Havoc over the Kuban, and Hell Hawks over the Bulge campaigns, various minor improvements such as fixes to career progression, taxiing on certain airfields, mission generation, etc. The popular community-created campaigns Kerch-Eltigen Operation and Battle of the Hürtgenwald will be included in the game with the permission of their authors.
We also want to start a multiplayer-related competition today: submit your best in-game tracks of multiplayer action! You can show any action, plane, or tank, as long as it is interesting and recorded in multiplayer (if you already have a saved track that you love and it loads in the game, you can submit it as well). Tracks should be short, showing an interesting event and a few seconds before and after. Please submit your tracks by April 12th. Then we'll choose the best ones - their authors will be awarded Collector planes of their choice and we will create a multiplayer promo video using these tracks. Please post the links to your tracks here or in our Discord channel till the end of April 11th.
-
By 76.IAP-Blackbird
Dear friends,
Today we would like to tell you about a new aircraft that our artists have been working on for some time and engineers have recently started to create its FM.
The Ta 152 is the last creation of the German aircraft designer Kurt Tank, which managed to take part in combat operations during the Second World War. This aircraft was the culmination of the evolution of the Fw 190 fighter and Germany's most advanced piston fighter. It was in development for a long time, several years, and appeared at the very end of the war. During the development, several modifications of the original Fw 190 were produced, which finally led to the Ta 152 - the name "Fw" was changed to "Ta" in recognition of the designer's merits.
Compared to the Fw 190D "Dora", the wingspan was significantly increased for better maneuverability at high altitudes, the fuselage was longer, and the new Jumo-213E engine was equipped with two boost systems: MW-50 (water-methanol mixture injection for low and medium altitudes) and GM-1 (nitrous oxide for high altitudes). The "Dora" engine was already characterized by a high degree of automation and regulation and thus complexity, but here the Germans went even further - the engine was equipped with a two-stage three-speed (!) supercharger.
As you can see, these improvements were made for high-altitude combat, where the Ta 152 had to outperform the Mustangs and Spitfires of the Allies - the threat from the bomber armadas climbing higher and higher was growing every year. The plane had a pressurized cockpit and could reach a speed of 750 km/h at an altitude of 12 km, and its ceiling was 14 km! Think about it - a piston fighter that could climb and fight above modern jetliners had no equal. Its armament is also respectable, even by late WWII standards: 30mm MK 108 and two 20mm MG-151/20 cannons allowed it to destroy any air target.
The Ta 152 went into production at the end of the war and appeared in the skies of Germany in January-February 1945, but due to the disparity of forces, they had no effect on the course of hostilities: they were produced in very small numbers (about 25 H-1s). They remained in history as a monument to German wartime engineering and design. In our simulator, we expect to release this very interesting aircraft this summer.
-
By JamesWilson
Hi everyone,
I was wondering how to customize the numbers after your callsigns, since it always gives me the same ones.
I think i managed somehow once, a bit of time ago, but now i forgot and have no idea how to.
I'm not talking about how to customize the callsign name, but the unit number after it.
As you can see in the Roster and in the picture under, i get "Fast Eagle 1-1" and "Fast Eagle 1-2"
Here are some examples:
The numbers on the tail, wing and nose numbers are customized, cause i managed how to change them, choosing them individually for each unit in the mission file by changing "AircraftNumber=" and typing the number, like "2" (as for 202). It doesn't change by typing the whole number tho, like 202 by typing 202, but it goes by typing the number that corresponds to the list of numbers you have. For example, In a list that goes from 200 to 400, you will have to type 10 to get 300. Here i just typed "2" and "7" since the list starts from 200
IIRC, in the past i just used to type the Aircaft number just like that, and in-game i had the proper number after the callsign, like "Fast Eagle 102", not just the number displayed on the plane livery.
How do i do? I'm pretty sure that it's possible to have "Fast Eagle 102" on my screen HUD and in the Roster
Thanks in advance for helping me.
-
By JPMoney
I’m flying an F-16I Sufa mod for Strike Fighters 2 Israel. I’ve modified the loadout ini file in an attempt to change the missile types and positions on the pylons. I’m having a consistent issue with the outer pylons (not the wingtip mounts, but the furthest pylons from the fuselage under the wings). I want these to carry one AMRAAM each, and as far as I can tell I have modified the loadout ini, the related missile object inis, and aircraft ini to be able to accommodate this. However, when I go to a single mission in-game and access the loadout screen, those outer pylons are always empty (no missiles). When I go to add missiles manually to these pylons, all AMRAAM types only are available in “4s” and not “2s.” So in other words it’s trying to mount 2 AMRAAMs on each pylon, which shouldn’t be possible (realistically), as these are set up for single missiles only. The F-16I ini file does have a relatively complex series of pylon rules, but I believe I have it set up to be able to mount AMRAAMs on these pylons, and I can’t find any setting in any file that would allow me to indicate there should only be the option to mount one missile per pylon in the loadout screen in game. I suspect a setting related to this “4 missiles” issue is preventing my loadout ini file from operating correctly and defaulting my vipers to have AMRAAMs on those pylons.
Any thoughts on a setting I am missing here?
-