Jump to content
Sign in to follow this  
Jon_Beers

Suggestions for combat flight sim upgrade

Recommended Posts

I have finally been able to purchase a decent more recent model PC. I have MS CFS2 & SFP1 running great on it. With all the hard-drive space I have created many installs with specific planes loaded in each install so the random mission generator button will load appropriate planes.

With MS CFS2 I like that you can define groups of enemy planes to chose from, but it messes up if you dump all your planes in one install.

Strike Fighters 1 doesn't seem to restrict appropriate planes to showing up when flying over a terrain even if you define friendly and enemy planes in that terrain's 'nations' file.

What I would like to do is upgrade to a more recent combat flight sim(s). I say sims because Id be surprised to find a game i liked for both WWII props AND jet (missile) combat.

Yes...I'd like some improvement in graphics, but I like the realism (flight mode;s) to be realistic as possible. I do realize the 'air' file or 'data' file creater or modifiers have a huge impact on flight model realism. For example, I can only remember losing a F-4 to an uncontrolable spin once and that was a stock plane not a mod; while, my MiG-29 will spin if you pull to many Gs at a low airspeed (to much AOA) and its a mod add-on!

Anyway, looking at pics online it appears that folks are really doing a good job on aircraft for more recent sims...and terrains.

Can anyone give me some input on what would be a good combat sim buy(s)? 

My budget is limitted and I can not buy everything out there to see if i like it like back in the day when i had less responsibility.

Oh, I do think i want to get MS FSX to get modern graphics. There's a payware F-4J/S Phantom available that I think I want.

However, the VC and skin of my F-4s in Strike Fightes 1 is pretty good really. I would imagine there's probably some pretty good free mod planes for a more recent combat simZ. I'm not THAT picky...I've been living with sims that came out practically in the last millinium for Jeez sake.

Input please...and thanks!!

Share this post


Link to post
Share on other sites

Modern combat sim with great graphics with requirement of realism?

DCS..........you can download it for free but you need a high end rig to run (and you may need to download v2 instead of 1.5).the rest of it (the modules) are not cheap.

Falcon 4.0 with BMS 4.33...very cheap to buy not as good graphics but ticks all the other boxes.

 

 

 

 

Share this post


Link to post
Share on other sites

Aces High 3 is free. You can play offline, though you will have to learn how to create offline "staged missions". They recently reinstated free user hosted arenas. Of course the game is really meant to be played in the massive pay-to-play arenas, but at a cost of $0, it is an excellent survey sim with so may different aircraft to fly as well as some tanks. I spend some time flying Aces High 3 as a paid subscriber. It works very well with VR (I have an Oculus Rift).

IL-2 Cliffs of Dover was patched up and re-released on steam for about $19 during the winter sale. It is limited to a Battle of Britain plane set, but the graphics looks great.

The go-to WW2 sim right now is the IL-2 Battle of Stalingrad / Battle of Moscow series, which happen to be on sale right now ($24.99 each for the base games). This series is shaping up to rival the original IL-2 in covering a vast plane set and has great graphics. I don't own either one for a variety of reasons, but I have heard nothing but good comments about it from people I know and trust. The developers also recently announced that they intend to slowly create a new WWI game around this same series because their existing WWI product, Rise of Flight, has gotten a bit dated.

My sim of choice is DCS World. If you try out the free Su-25T and TF-51D and discover it runs good enough on your machine, then consider getting Flaming Cliffs 3 which is on sale right now for $18. It is a great price for the A-10A, Su-25, F-15C, MiG-29, Su-27, and Su-33. Carrier operations with the Su-33 are fun. But DCS World is at its best with the full-blown study sim add-on aircraft. If you like that sort of thing, wait for sales and buy one or two aircraft as time and money permit.

 I bought into the SimWorks Studios F-4B for FSX, so I also fly some FSX with TacPack. While FSX Steam Edition can be found on sale for very little cost, good addon aircraft aren't cheap and neither is TacPack if you want any kind of air combat functionality in FSX.

SF2 is a little dated, but is still a nice upgrade from SFP1 and is fairly cheap if you only buy one of the games.

If I were you and my machine specs were good enough, I would get either Il-2 BoS or Il-2 BoM for WW2 flying and DCS World/Flaming Cliffs 3 for jets. Of course Ace High 3 is free, so you should try that one, too.

 

Share this post


Link to post
Share on other sites

Alright...thanks for the comments. I've enjoyed SFP1 very much and am considering SF2 if it will run on win 7 / will look into dcs

FSX has that F-4J/S add-on available (forgot by who)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By MigBuster

      The Boeing CH-47F Chinook fondly referred to as ‘The Hook’ by US military personnel, stands today as the premier multi-mission rotary wing aircraft in use with the US Army, US Army Reserve, National Guard and 20 other nations including Canada, the United Kingdom, Netherlands, Japan, Italy, Greece, Spain, South Korea, Australia, Türkiye, India and the United Arab Emirates. Embodying a unique tandem rotor design this massive helicopter excels in all its roles, including cargo and troop transportation, sling load operations, search and rescue, casualty evacuation, special operations, and humanitarian assistance in disaster scenarios.
      Engineered for exceptional stability and control, the CH-47F twin engine, tandem rotor configuration ensures maximum agility and facilitates straightforward loading and unloading procedures. This design uniquely positions the CH-47F for operation in environments inaccessible to others. The absence of tail rotor interference permits rear ramp access on varied terrains, including unprepared or mountainous locations, capitalising on its remarkable landing capability. Furthermore, the aircraft's design facilitates high-altitude flight up to 20,000 feet, surpassing other helicopters in its weight category.
      The CH-47F is equipped with a state-of-the-art, fully integrated digital cockpit management system; the Common Avionics Architecture System (CAAS) Cockpit, in synergy with a Digital Automatic Flight Control System (DAFCS). These advanced systems enhance cargo-handling efficiency while significantly boosting mission performance and all weather situational awareness. CH-47F also offers side and rear door gunner positions, a radar warning receiver with chaff and flare dispensers for auto protection.
      With the capability to cover extensive distances swiftly, the CH-47F can be outfitted with extended range fuel tanks and is compatible with air-to-air refuelling, thus extending its operational range further than ever before. This capability underscores the aircraft’s adaptability and endurance, making it a formidable asset in any fleet.
      In total some 1'200 plus CH-47 helicopters of all variants were delivered. This icon of a war machine saw combat service in all the major theatres since its inception, notably Vietnam, Iran, Libya, The Falklands, The Balkans, Iraq and Afghanistan. 
       
      Capabilities of the CH-47F
      Tandem Rotor Design: The CH-47F features a distinctive tandem rotor system with two counter-rotating rotors. This design provides exceptional handling qualities and allows for a large lift capacity, which is crucial for carrying heavy payloads. The absence of a tail rotor also enhances safety in confined areas and simplifies maintenance, offering unhindered rear cargo and troop loading in addition to side door access. Powerful Performance: Powered by two Honeywell T55-GA-714A engines, the CH-47F offers impressive power and performance. These engines deliver up to 4,868-shaft-horsepower combined, enabling the aircraft to reach speeds over 175 mph (282 km/h) with a payload of more than 21,000 pounds (9,500kg). Cargo Handling and Versatility: The CH-47F's large cargo hold can accommodate a wide variety of loads, from standard palletized goods to vehicles and artillery, as well as the fuel cells for “Fat Cow” operations. Its rear-loading ramp and three external cargo hooks provide multiple options for loading and unloading, facilitating efficient logistics operations under diverse conditions. Advanced Avionics and Systems: The “glass-cockpit” of the CH-47F is equipped with advanced avionics, including a Rockwell Collins Common Avionics Architecture System (CAAS) cockpit, BAE Systems' Digital Advanced Flight Control System (DAFCS), night vision-compatible displays, and modern navigation systems. These enhancements improve situational awareness and flight safety, particularly in challenging environments. Crew Capacity and Configuration: Typically operated by a crew of three (two pilots and a flight engineer), the CH-47F can also carry up to 3 gunners.  Enhanced Survivability: Advanced countermeasures suite, which includes radar warning receivers and infrared countermeasures. Its rugged airframe and systems redundancy are designed to withstand significant damage. The CH-47F is an essential component of any military or humanitarian fleet, capable of performing in the most demanding situations. Its enduring design and continual updates ensure that it will remain a key player in aviation for years to come. 
      Key Features of the DCS: CH-47F for early access release:
      Highly detailed external and internal modelling, including cockpit and cargo hold Unmatched helicopter flight dynamics that only DCS can provide Fully interactive, VR-ready cockpit  Full set of features will be announced prior to early access Pre-purchase yours today!
      Don’t miss the exclusive 30% discount during the pre-purchase phase. Hurry! This offer only lasts until launch.
       
      (Text from Eagle Dynamics)
    • By JamesWilson
      Hi everyone,
      I recently got into weapon modding and wanted to edit some missiles.
      I went for the Weapons Folder with the Weapons Editor, and some weapons were missing, even tho i can see them and equip them in-game.
      I wanted to edit the AA-2D Atoll for my Su-22M3, but there's no AA-2 folder inside Weapons folder, nor inside plane folder, even tho the missile is equippable and i can see it/use it in-game.
      Since there's no Atoll folder, i have no idea how is it possible for me to have it in-game, and even less i know on how am i supposed to edit it through Weapons Editor, since i can't select the folder.
      I thought it may be a sort of "built-in-game" missile and for this reason not showing in weapons folder (idk i just made an hypothesis).
      So i tried using the CAT Extractor, but seems like not working... no matter which CAT file i select, it says "error opening this .CAT file, no files can be extracted", how's that? How do i fix it? Am i doing something wrong?
      Thank you in advance for helping me fixing all these issues or helping me find what i'm doing wrong
    • By JamesWilson
      Hi everyone,
      I was wondering how to customize the numbers after your callsigns, since it always gives me the same ones.
      I think i managed somehow once, a bit of time ago, but now i forgot and have no idea how to.
      I'm not talking about how to customize the callsign name, but the unit number after it.
      As you can see in the Roster and in the picture under, i get "Fast Eagle 1-1" and "Fast Eagle 1-2"
      Here are some examples:


      The numbers on the tail, wing and nose numbers are customized, cause i managed how to change them, choosing them individually for each unit in the mission file by changing "AircraftNumber=" and typing the number, like "2" (as for 202). It doesn't change by typing the whole number tho, like 202 by typing 202, but it goes by typing the number that corresponds to the list of numbers you have. For example, In a list that goes from 200 to 400, you will have to type 10 to get 300. Here i just typed "2" and "7" since the list starts from 200


      IIRC, in the past i just used to type the Aircaft number just like that, and in-game i had the proper number after the callsign, like "Fast Eagle 102", not just the number displayed on the plane livery.
      How do i do? I'm pretty sure that it's possible to have "Fast Eagle 102" on my screen HUD and in the Roster
      Thanks in advance for helping me.
       
    • By Tonci87
      I´m sure you have seen it in some movie, or read it in a story. 
      Someone who has no clue about airplanes has to get in one and fly off to somewhere.
      They usually just get in and fly away, but it is really that simple?
      Since I´m new to the flightsim genre I decide to dedicate my first flight to answering that question.
      https://www.youtube.com/watch?v=VMxr0QLArPc
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..