Jump to content

Recommended Posts

Hi modders, is there a tutorial available on making serial numbers/registration number decals ???

Share this post


Link to post
Share on other sites

The way I do it is the same as nose numbers: iterative decals which are applied either left or right at the location where you want the number.

An example, for the inaugural VF-1 Wolfpack skin in the Tomcat Super Pack, I made a set of .tgas "BuNoxxx" from 000 to 011.  Each one matched the real-world bureau number of VF-1's F-14As from NK100 to NK114 (remember 108 and 109 aren't used), so BuNo000 matches USFtrNum000 and TailNum000, and NK100 will always be 158979, NK101 will always be 158989, etc.  The call-out in the DECALS.ini look like this:

[Decal007]
MeshName=LeftEnginePod
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-14A_74/VF1NK74/D/BuNo
Position=-5.275,-0.95
Rotation=0.0
Scale=1.0
DecalMaxLOD=4

[Decal008]
MeshName=RightEnginePod
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-14A_74/VF1NK74/D/BuNo
Position=-5.275,-0.95
Rotation=0.0
Scale=1.0
DecalMaxLOD=4

Notice that they're the same decal, just facing a different direction.  If you're using italics, it doesn't work cleanly and you have to make two different sets, but most bureau numbers I'm aware of aren't italicized.  

Hope this helps.

  • Like 2

Share this post


Link to post
Share on other sites

TK's decal tutorial (explaining the Level= system) should be in someplace in the SF1 downloads section (mabye Utilities?)

To actually MAKE them, you need Photoshop or some other program that can create the 32-bit tgas* w/alpha channel

 

* yes, I know by inference, all R/G/B tgas with alpha are 32 bit

Share this post


Link to post
Share on other sites
1 hour ago, Wrench said:

To actually MAKE them, you need Photoshop or some other program that can create the 32-bit tgas* w/alpha channel

I use GIMP. When exporting the tgas I had to disable the option "RLE compression", otherwise the decals wouldn't show up in the game.

Edited by mue
  • Like 3

Share this post


Link to post
Share on other sites

This is the tutorial :smile:

 

Edited by delrey
  • Like 1

Share this post


Link to post
Share on other sites

a pity the images are long lost

Share this post


Link to post
Share on other sites

I'd also add that for serial numbers you need to name them with a three-digit suffix number something like;

SERIALNUM000.tga

SERIALNUM001.tga

SERIALNUM002.tga

SERIALNUM003.tga

ETC. ETC.

Share this post


Link to post
Share on other sites

Oops ... it seems I should have a closer look at the knowledge base. The information (non-support of RLE-compressed tgas) I found out through trial and error, was already there, even repeated. :doh:

  • Haha 1

Share this post


Link to post
Share on other sites

I think i have created one too... wondering if it is still around...

Share this post


Link to post
Share on other sites

side note, while this is about serial numbers it can be applied to nose arts, special markings (like CAG birds for navy jets) and even whole skins (like Gepards unique camo's for LSK Mig-21s).

its just a matter of tying the desired marking to the serial number (noseart002.tga with sn002.tga) and assigning decallevel=2 in the decal ini. also in the example of the boss birds you should have a common marking without numbers and one or more with (tail, and tail001 for example). the common one will appear on all others while the special will be just on that bird.

my two cents on the matter

  • Like 1

Share this post


Link to post
Share on other sites

So it looks in Photoshop


1 only one layer filled with the color of the decal

image.thumb.png.d8854804704c8614dff16e3c83432a7a.png

 

2) in the RGB channels layer is added in alpha (the numerals are pasted there)

image.thumb.png.44089cc72557403e8fcac6b9ac7232a7.png

 

3) It is important that this alpha be with absolute black background and absolute white text (lighter or darker tones will result in a translucent sticker ... which can also be an option according to your intention)

image.thumb.png.83cd981079d6db6e5deb46c7735e7aa7.png

 

4 So it looks with the RGB and alpha activated, in pink all the transparent area

image.thumb.png.26ef2c442aa76ec0333990fc1843fd58.png

 

A strange fact, product of my experience ... each 3d mesh can accept up to 8 stickers, ask who would use both. Well, when you discover that labels are not only useful for creating serial numbers, for example, they paint. Meshes that have no texture, or locate texts that can not be read by low resolution, you may need it.

I hope it is useful, greetings!

Edited by PeacePuma

Share this post


Link to post
Share on other sites

Reminder:

all images (numbers, nose arts, insignia, etc --ie, ALL decals) MUST be centered in the tga. Otherwise, you don't really know where it's going to sit, via the placement numbers 

Share this post


Link to post
Share on other sites
14 hours ago, Wrench said:

Recordatorio:

Todas las imágenes (números, artes de la nariz, insignias, etc., TODAS las etiquetas) DEBEN estar centradas en el tga. De lo contrario, realmente no sabe dónde se sentará, a través de los números de ubicación 

You say by the example that I put ?? because exactly that is intentionally aligned to the left because the numeral that follows fills the space that 1 does not fill ...:ok:

Share this post


Link to post
Share on other sites

then make them as "one piece"; as I assume they're all Level=2

having made near 10000 (yes, that's thousand, counting them all) decals, you can trust my advice! :good:

Share this post


Link to post
Share on other sites

I make blank transparent image,add numbers etc,then...as below...much easier and quicker

image.png.2738f7a970faa3219519262c07e76014.thumb.png.b47e4e25ffc82c099fb09b4964dde6f9.png

Share this post


Link to post
Share on other sites

My Method for serial decals goes like this:

In Excel or Google sheets i create the serials:

image.png.39794d0114b3b90074672ecfe03031da.png

Then paste them to a notepad:

image.png.5972930aa856076be83393cf474ba4ae.png

Then move to Word or any other text app and edit the font and effects

image.png.29aa74072dd3fbbfd9bb0dd501a4ee54.png

Then cut them with Snag it

image.png.8a8d7f20ee2bc1e1b95db8e13ec62679.png

And then i create them with Photoshop, the process explained above...

Hope this helps...

 

Share this post


Link to post
Share on other sites

You can also make own unique desired font. - which is quite easy and takes just a few moments. Considering you might use it in a few projects, one effort of making font will profit in the future. 

I am using Gimp. So the process is quite easy and you can even make  20-30 decals per minute. (serial numbers etc..)

Create a layer - full transparent. Chose 'text' from the side bar and write what is needed and export - without RLE compression. then delete text, input new one and export... and again and again. 

I am always setting some small transparency to text/numbers etc...in my opinion it looks better on aircraft and blends much better with skin. Usually around 90% transparency. 

Share this post


Link to post
Share on other sites

doublin down on yakarovs response, if you save the gimp file from making the first few decals you can also save the font you use.

B-52s as example, i have a tailNum xcf (GIMP file, like a Photoshop psd) and to make a new serial just go to the text layer, then backspace rather than delete the whole thing.

1.thumb.jpg.6cf0d158be59466938b7ae33762a5dbb.jpg

if you place the cursor within the text layer at teh end or in between numbers, it will keep the exact previous format. that way, i only have to change two digits to get 78912 from 78908 and the color, size, and font are the same as before

2.thumb.jpg.99f30db1582123306ae01e8781faf03c.jpg

notice the placement of the cursor in the second one. one click and its back to teh settings first created in December

and play with the transparency for best effect. on a high contrast skin 90% is good, for mostly green/gray skins (like Strategic Scheme or European 1) i use around 55-60% as they were harder to see. full 100% opacity tends to leave a white line around dark edges of the decal

finally, @Wrench

20 hours ago, Wrench said:

having made near 10000 (yes, that's thousand, counting them all) decals, you can trust my advice! :good:

only 10000? i'd think more towards a million:lol:

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites
Quote

white line around dark edges of the decal

 

that's why i always fill the surroundings with hard black. That "leakage' is only an SF2 thing; in 1stGens it never showed up. Might be related to how DX10 sees the alpha's transparancy

surround1.jpg

surround2.jpg

Share this post


Link to post
Share on other sites
24 minutes ago, daddyairplanes said:

if you place the cursor within the text layer at teh end or in between numbers, it will keep the exact previous format. that way, i only have to change two digits to get 78912 from 78908 and the color, size, and font are the same as before

exactly what am doing...:ok:

Share this post


Link to post
Share on other sites

As always,brilliant advice from all you super helpful modders.Thanks for all your inouot and I'll be giving it a go when I get a minute .

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By toot
      Hi, was wondering if anyone knows how to extract decals and insignia's using the cat extractor? I've only managed to get skins out (which was also kinda annoying since you need the exact name), but i havent been able to find decals and insignias.
      Would appriciate any suggestions and tips!
    • By Slant6
      Installing one of MyTai's F-4B skins for SF1 to SF2 F-4B_67. Following correct SF2 file path for decals; all show up except nose number only on left side. How do I fix this?
       
       
      [Decal001]
      MeshName=fuselage_P
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\nsl
      Position=1.35,-0.17
      Rotation=0.0
      Scale=8.625
      DecalMaxLOD=3
      [Decal002]
      MeshName=fuselage_P
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\nsr
      Position=1.35,-0.17
      Rotation=0.0
      Scale=8.625
      DecalMaxLOD=3
      [Decal003]
      MeshName=wing_left_outer
      DecalLevel=0
      DecalFacing=TOP
      FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
      Position=-4.0,-0.94
      Rotation=37.5
      Scale=3.2
      DecalMaxLOD=3
      [Decal004]
      MeshName=wing_right_outer
      DecalLevel=0
      DecalFacing=BOTTOM
      FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
      Position=4.0,-0.94
      Rotation=37.5
      Scale=3.2
      DecalMaxLOD=3
      [Decal005]
      MeshName=splitter_plate_left
      DecalLevel=3
      DecalFacing=LEFT
      FilenameFormat=kill
      Position=5.995,-.141
      Rotation=00.0
      Scale=0.75
      DecalMaxLOD=2
      [Decal006]
      MeshName=vertical_stabilizer
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
      Position=-5.55,1.74
      Rotation=0.0
      Scale=6.0
      DecalMaxLOD=3
      [Decal007]
      MeshName=vertical_stabilizer
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
      Position=-5.55,1.74
      Rotation=0.0
      Scale=6.0
      DecalMaxLOD=3
      Reverse=TRUE
      [Decal008]
      MeshName=rudder
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
      Position=-5.55,1.74
      Rotation=0.0
      Scale=6.0
      DecalMaxLOD=3
      [Decal009]
      MeshName=rudder
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
      Position=-5.55,1.74
      Rotation=0.0
      Scale=6.0
      DecalMaxLOD=3
      Reverse=TRUE
      [Decal010]
      MeshName=vertical_stabilizer
      DecalLevel=1
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NFR
      Position=-5.85,1.75
      Rotation=0.0
      Scale=2.10
      DecalMaxLOD=3
      [Decal011]
      MeshName=vertical_stabilizer
      DecalLevel=1
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NFL
      Position=-5.85,1.75
      Rotation=0.0
      Scale=2.10
      DecalMaxLOD=3
      [Decal012]
      MeshName=wing_left_inner
      DecalLevel=0
      DecalFacing=TOP
      FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
      Position=-4.0,-0.94
      Rotation=37.5
      Scale=3.2
      DecalMaxLOD=3
      [Decal013]
      MeshName=wing_right_inner
      DecalLevel=0
      DecalFacing=BOTTOM
      FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
      Position=4.0,-0.94
      Rotation=37.5
      Scale=3.2
      DecalMaxLOD=3
      [Decal014]
      MeshName=fuselage_P
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=f-4b_67\pacusnvf151 71\D\b
      Position=-3.40,2.20
      Rotation=0.0
      Scale=5.0
      DecalMaxLOD=3
      [Decal015]
      MeshName=fuselage_P
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=f-4b_67\pacusnvf151 71\D\b
      Position=-3.38,-1.0
      Rotation=0.0
      Scale=5.0
      DecalMaxLOD=3
      [Decal016]
      MeshName=fuselage_front
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
      Position=7.0,0.0
      Rotation=0.0
      Scale=10.0
      DecalMaxLOD=3
      [Decal017]
      MeshName=fuselage_front
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
      Position=7.0,0.0
      Rotation=0.0
      Scale=10.0
      DecalMaxLOD=3
      Reverse=TRUE
      [Decal018]
      MeshName=canopy_front_outer
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
      Position=7.0,0.0
      Rotation=0.0
      Scale=10.0
      DecalMaxLOD=3
      Reverse=TRUE
      [Decal019]
      MeshName=canopy_front_outer
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
      Position=7.0,0.0
      Rotation=0.0
      Scale=10.0
      DecalMaxLOD=3
      [Decal020]
      MeshName=canopy_rear_outer
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
      Position=7.0,0.0
      Rotation=0.0
      Scale=10.0
      DecalMaxLOD=3
      Reverse=TRUE
      [Decal021]
      MeshName=canopy_rear_outer
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
      Position=7.0,0.0
      Rotation=0.0
      Scale=10.0
      DecalMaxLOD=3
      [Decal022]
      MeshName=fuselage_front
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\ls
      Position=7.50,-0.3
      Rotation=0.0
      Scale=5.80
      DecalMaxLOD=3
      [Decal023]
      MeshName=fuselage_front
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=f-4b\pacusnvf151 71\D\rs
      Position=7.50,-0.3
      Rotation=0.0
      Scale=5.80
      DecalMaxLOD=3
      [Decal024]
      MeshName=spoiler_left
      DecalLevel=0
      DecalFacing=TOP
      FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
      Position=-4.0,-0.94
      Rotation=37.5
      Scale=3.2
      DecalMaxLOD=3
      [Decal025]
      MeshName=flap_inner_right
      DecalLevel=2
      DecalFacing=TOP
      FilenameFormat=F-4B_67\pacusnvf151 71\D\f
      Position=2.38,-1.56
      Rotation=-14.0
      Scale=0.50
      DecalMaxLOD=4
      [Decal026]
      MeshName=flap_inner_left
      DecalLevel=2
      DecalFacing=TOP
      FilenameFormat=F-4B_67\pacusnvf151 71\D\f
      Position=-2.38,-1.56
      Rotation=14.0
      Scale=0.50
      DecalMaxLOD=4
      [Decal027]
      MeshName=rudder
      DecalLevel=2
      DecalFacing=RIGHT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\fpr
      Position=-7.17,2.18
      Rotation=0.0
      Scale=0.3
      DecalMaxLOD=4
      [Decal028]
      MeshName=rudder
      DecalLevel=2
      DecalFacing=LEFT
      FilenameFormat=F-4B_67\pacusnvf151 71\D\fpl
      Position=-7.17,2.18
      Rotation=0.0
      Scale=0.3
      DecalMaxLOD=4
      [Decal029]
      MeshName=wing_right_outer
      DecalLevel=0
      DecalFacing=TOP
      FilenameFormat=F-4B_67\pacusnvf151 71\D\NL
      Position=4.90,-1.7
      Rotation=-37.5
      Scale=2.0
      DecalMaxLOD=3
    • By Eagle114th
      I am unable to find the tutorial on modifying or replacing national decal.  There are two nations I want to replace decal.  At the same time, there are a few nations I want to add into the game and add their decals too. I can't seem to find the tutorials on it.

      So may I ask for the advice on this?

      I am working on interesting projects which requires me to do this.  

      Cheers!
    • By jjlehto
      Since a while, I find myself in this condition (see pic).
      The RAF roundels are like 4 times the correct size. Happens only with RAF decals (all the other  air forces are correct). Also happens on most other RAF planes (like Javelins, Hunters etc).
      I was thinking, perhaps some mod broken them, but I'm unable to trace back when it started.
      I reckon someone probably incurred in this already, I'd be grateful to know how can it be solved.
      Thanks.

    • By Ngr
      Can anyone help me remove unwanted decals fragments?



×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..