Jump to content

Recommended Posts

Hey, it's me again! Thanks to Bazillius I was able to solve the HUD problem. Now, I have another problem: the canards of the J-10 are rotating in the wrong direction. This means, when they have to rotate in the pitch-up direction, they rotate as pitch-down. I had this problem in a couple planes, but since this is the first one I'm going to publish, I want it to be perfect. If anyone knows how to solve this problem, it would be very appreciated. Good flight!

Share this post


Link to post
Share on other sites

ReverseModelOrientation = ???

if true, change to false

if false, change to true

test in game

Share this post


Link to post
Share on other sites

Thank you Wrench! I will try! If you have any other idea, tell me! Thank you...!

Share this post


Link to post
Share on other sites

i agree with Kevin , make sure that  in the data ini  under canards there is a line like this ---> ReverseModelOrientation =True

Share this post


Link to post
Share on other sites

Try an aircraft with canards that are correct and compare the two FM's.

Share this post


Link to post
Share on other sites
On 29/7/2021 at 10:57 AM, Spinners said:

Try an aircraft with canards that are correct and compare the two FM's.

Apparently is a problem with the model. Is Insky's final version of the J-10A. Installed the plane on 2 different PCs and had the same problem. And it happened again with the SOKO Kometa by Spinners, wich uses that model. Although, I'm still working on it...

Share this post


Link to post
Share on other sites

then, the odds are the animations are/were fucked up in MAX when the model was rendered and finalized. In that can, not a lot can be done

Share this post


Link to post
Share on other sites
1 hour ago, Wrench said:

then, the odds are the animations are/were fucked up in MAX when the model was rendered and finalized. In that can, not a lot can be done

I remember I changed some values in the data.ini file and it worked in the left canard. I'm going to try again today and see. If it works, I'm going to do the same with the right canard...

Share this post


Link to post
Share on other sites

UPDATE: I finally managed to get the canards workin well. Thank you everyone for your help and support. The mod is well headed. I'm going to get busy with classes but I will manage to release it. Overall is looking good. Still working on some skins and ini files. Here's a quick pic of the mod...

Good flight and hunting!img00084.thumb.JPG.07965d5cc9f795aceb4daedaea901044.JPG

Share this post


Link to post
Share on other sites
On 28/07/2021 at 6:33 PM, 1309mariano said:

I want it to be perfect.

Well, there's a bunch of issues with this one.

If you managed to have the canard surface move the right direction for the pitch up/down inputs, are they moving the right way for the roll inputs as well ?

The whole control surfaces section must be checked and edited.
There's no flap on the J-10.

Share this post


Link to post
Share on other sites
15 minutes ago, Cliff7600 said:

Well, there's a bunch of issues with this one.

If you managed to have the canard surface move the right direction for the pitch up/down inputs, are they moving the right way for the roll inputs as well ?

The whole control surfaces section must be checked and edited.
There's no flap on the J-10.

Yes, roll input works perfect too. I changed some values and it worked perfectly. At first, roll wasn't working, but then I fixed that.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By JamesWilson
      Hi,
      a couple of months ago i discovered this gorgeous total conversion called "Yankee Air Pirate", and that the "REVAMP" edition for SF2 (the original one was for WOV) existed, and other awesome total conversions like "Drug Wars" and "Flight School" too, so i got ready to download them, but since i hadn't enough space at the time, i waited.
      Now i come back on the website to find out all the links and pages about the revamp are gone, there's only the original ones for SF1 series.
      Do anyone of you know why they're gone? Will they come back? They're maybe updating the mods?
      Thanks
    • By JamesWilson
      Hi everyone,
      I recently got into weapon modding and wanted to edit some missiles.
      I went for the Weapons Folder with the Weapons Editor, and some weapons were missing, even tho i can see them and equip them in-game.
      I wanted to edit the AA-2D Atoll for my Su-22M3, but there's no AA-2 folder inside Weapons folder, nor inside plane folder, even tho the missile is equippable and i can see it/use it in-game.
      Since there's no Atoll folder, i have no idea how is it possible for me to have it in-game, and even less i know on how am i supposed to edit it through Weapons Editor, since i can't select the folder.
      I thought it may be a sort of "built-in-game" missile and for this reason not showing in weapons folder (idk i just made an hypothesis).
      So i tried using the CAT Extractor, but seems like not working... no matter which CAT file i select, it says "error opening this .CAT file, no files can be extracted", how's that? How do i fix it? Am i doing something wrong?
      Thank you in advance for helping me fixing all these issues or helping me find what i'm doing wrong
    • By JamesWilson
      Hi everyone,
      I'm trying to recreate the 1st Gulf of Sidra Incident with my F-14A Tomcats and my Su-22M3 Fitters, doing it extremely historically accurate, paying attention to every little detail.
      So far i've done everything, and it's almost identical to the real one, but there's ONE issue i can't figure out, let me explain:
      During the morning of the 19th of August 1981 two F-14A Tomcats intercepted two Libyan Su-22M3 Fitters in the Gulf of Sidra.
      The Fitters were equipped with two AA-2 "Atoll".
      Just before the merge, while nose-to-nose, one of the two Fitters fired a missile to one of the two Tomcats, but being the missile a very old and primitive heatseeker, it started tracked and going for the Tomcat, but as soon as the F-14 made a slight break, the Atoll lost its track.
      The PROBLEM IS:
      There's no way i can make the Fitters shoot the missiles before merging, if only the AA-2, or any other equippable missile was all-aspect or radar guided just like the R-23, i think it would work.
      I tried having a head-on merge with two Mig-23 Floggers equipped with radar guided R-23s and they shot at me before merging.
      I tried all other available missiles and nothing changed, some didn't show either.
      I tried copying and pasting the Data file from the Aim-7 to the R-60 Data file, and nothing changed.
      I tried changing the loadout file to R-23, but the Fitters show up without any weapon since there's no R-23 option in loadout for Su-23M3s, so i think it's not possible to have them (and would be historically inaccurate too).
      I tried changing enemy difficulty from Normal to Hard, but nothing changes still.
      The only thing the Fitters do is shooting their guns just before the merge, but no missiles are fired when nose-to-nose.
      Is there a way to fix this? A way i can make my Fitters fire at least one of their missiles when we're nose-to-nose, just like when i got nose-to-nose against Floggers equipped with R-23s?
      Is it a problem with the enemy AI? Or with the missiles? Or maybe even with the Su-22M3 Fitter i'm using?
      Thank you very much for helping me
    • By JamesWilson
      Hi,
      after seeing the TMF F-14 has wrong and inaccurate speed and fuel indicators, i found out the default Third Wire F-14 has working and accurate ones, but i dont wanna use it cause the TMF Tomcat is better and the cockpit too more realistic too, so can you switch the speed and fuel indicators on the TMF F-14 with the default Third Wire F-14? And for fuel too? Do you need to 3D model and/or do something else other than edit some text files?
       And is it or it's not possible to do?
      Down here are 2 pictures from the correct cockpit in the default Third Wire F-14:


      And 2 from the TMF F-14 (the inaccurate one):


       
      Thanks for helping.
    • By BF109K4SL


      View File Shenyang J-7(Type-62) Fighter prototype silver
      I tried my best to find the correct fonts,this is the most similar fonts
      “毛主席万岁” is means "Long live Chairman Mao"
      On 17th January 1966 the first Shenyang-built J-7 Fishbed made its maiden flight at the hands of Ge Wenrong(葛文镛)
      If you haven't downloaded my J-7, it doesn't matter. It can still be used by throwing it into the folder of MiG 21F-13
      Submitter BF109K4SL Submitted 01/31/2024 Category J/F-7  
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..