Sign in to follow this
Followers
0
Chengdu J-10AR "Ehécatl"
By
1309mariano, in Thirdwire: Strike Fighters 2 Series - File Announcements
-
Similar Content
-
By BF109K4SL
View File Chengdu J-7III J-7IIIA
The J-7 III/IIIA (also known as J-7C/D) model is a mapping and imitating MiG-21MF all-weather aircraft from Romania and Bangladesh, equipped with a turbojet 13 engine that is modeled after the P-13F-300 engine of the MiG-21MF.
I painted the unique painting of the J-7 III myself, and I used SF2 MiG 21 gray for the IIIA
Type-23-3 Cannon are available
Because I couldn't find the image of the radar screen for the JL-7 radar (the only image shows no radar screen at all), I used the F-4C radar screen to change it, the JL-7A is a MiG 23 radar screen
I suspect that the RWR is the same type of RWR as the MiG 21, omnidirectional
PL-5C and PL-5D. I copied the information online，if you don't like it，you can keep using PL-5B
I didn't make the tactical number
Note:
The cockpit is part of the MiG 21UM mod
References:
https://www.doc88.com/p-9337262932968.html?s=rel&id=4
https://www.doc88.com/p-377487159434.html?s=rel&id=3
Chinese Aircraft - China's Aviation Industry since 1951 by Yefim Gordon and Dmitriy Komissarov
https://military-history.fandom.com/wiki/Chengdu_J-7 https://new.qq.com/rain/a/20210515A04MJW00
Strike Fighters Legends
Strike Fighters Modern Combat Submitter BF109K4SL Submitted 09/16/2023 Category Other
-
By Gepard
View File Rio de la Plata terrain
Rio de la Plata terrain version 1.3
*****************************************************
++++++++++++++++++++++++++++++++++++++++++
This terrain is written for SF2NA and SF2E or SF2I.
+++++++++++++++++++++++++++++++++++++++++
I. Short description:
This terrain covers the Bay of the river Rio de la Plata. South of this bay we find Argentina, north of it Urugay and Brazil. East of it is the Atlantic Ocean.
The timeframe of the terrain is from 1980 to 2020.
It is made as a NavalMap with carrier vs carrier operations in mind.
The scenario is, that in 1982, the Royal Navy answered the argentinian invasion on the Falkland islands with sending a Naval Task Force toward Buenos Aires and landing troops on the shores of Argentina.
Thatswhy you find a big british beachhead on the map.
You can fly following missions for the British and their allies, the Brazilians:
SWEEP,CAP,ESCORT,INTERCEPT,STRIKE,SEAD,ANTI_SHIP,RECON,CAS,Armed_Recon
For the Argentinians you can fly this missions:
SWEEP,CAP,ESCORT,INTERCEPT,STRIKE,SEAD,ANTI_SHIP,CAS,RECON
New in vesion 1.2:
- number of target area increased from 37 to 47
- all target areas are now fitted with objects. Factories, warehouses, commbuilding etc.
- Airbase Tandil moved 75 km westward. It is not yet at the correct position. I fear, that if the base is placed at the correct position, the AI would not use it, because it is to far in the west.
- At the former position of Tandil Airbase i placed a temporary aifield.
- I added the river Rio Paradana and the neigbour rivers.
- I relocated Montevideo and the Montevideo Airport. The airport is completly new made.
- I reworked all rivermouth tiles, enlarged them to 1024x1024 pixel size.
New in version 1.3
- number of targetareas increades to 82
- a lot of new factory target areas for Argentina
- included uruguayan airbases
- included static Cessna for airfield "population
- included some goodies
++++++++++++++++++++++++++++++++++++++++++++++++
II. INSTALLATION:
To run this terrain you need SF2NorthAtlantic and SF2 Israel or SF2 Europe.
Unzip all files into your saved game folder ...ThirdWire\StrikeFighters2XXXX
Thats it.
If you have SF2Europe installed you must do nothing more.
If you miss SF2E and have SF2Israel you must open file
Rio_de_la_Plata_Bay.ini
with Notepad editor and look for the lines:
//CatFile=..\IsraelME\IsraelME.cat
CatFile=..\GermanyCE\GermanyCE.cat
change the entry into:
CatFile=..\IsraelME\IsraelME.cat
//CatFile=..\GermanyCE\GermanyCE.cat
save the file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
II.A: Goodies
I have made a new mainscreen and included a new mainscreensound. Check it out and if you like it then copy the folder Menu to your SF2 mod installation
If you own the TK's DLC28 and SF2Israel, you can use the MirageIIIEA and MirageIIIEBR, which you also find in the goodies folder. Simply copy to your objects folder.
++++++++++++++++++++++++++++++++++++++++++++++++++
III. Credits.
Tileset is basing on Starys Green Hell 3.0 tileset. I converted it to jpg format and
merged the 512x512 tiles to 1024x1024 pixel tiles.
Tileset green made by Wilches
GK-CG1 civil airport building made by GKABS
GK-CMT civil airport building made by GKABS
GK-CT1 civil airport building made by GKABS
Base_C.lod round parking area taken from AirfieldDevKit_v1.1, made by Pureblue
Base_H.lod small parking area taken from AirfieldDevKit_v1.1, made by Pureblue
ControlTower.LOD made by RussoUK
Modern Royal Navy ship pack made by WhiteBoySamurai
i added shipnumbers and converted the bmp to jpg files, corrected the hitboxes
ARA 25 de Mayo made by Torno for original 25 de Mayo CV, - upgrades by paulopanz
i made the angle deck and the Flak working and converted the bmp to jpg files
TAM made by SUICIDAL & Torno, taken from SF2 Tanks Pack
i converted the bmp to jpg files
TAM_Roland made by Gabilon, i made a new skin
Unimog made by BANIDOS TEAM and SUICIDAL
i converted the bmp to jpg files
GearingFRAM1B_ Argentina stock ship of SF2NA, made by TK, modded by me
SumnerFRAM2_Argentina stock ship of SF2NA, made by TK, modded by me
Fearless Class Austin, stock ship of SF2NA, made by TK, modded by me
Cleveland class made by YEYEYE (General Belgrano), modded by me
Leopard1A5_Brazil LOD file made by Gabilon, skin made by me
Gepard_Brazil LOD file made by Gabilon, skin made by me
Factory buildings Made by Geezer
Refinery1,2 and Factory-2 Made by Wingwiner, i renamed the files
Techniker made by Geezer, moded by me
Mainscreensound mady by Andrius Klimka
A special Thank you goes to Wilches and Snowburn for their support.
I hope i have not forgotten someone.
.
++++++++++++++++++++++++++++++++++++++++++++++++
IV. This Terrain is Freeware. Commercial use is not allowed.
And i say it again for the YAP, YankeeAirPirates file thiefs, the usage of this terrain and/or parts of the terrain for commercial use is not allowed!!!!!
+++++++++++++++++++++++++++++++++++++++++++++++++
V.
For remarks, comments, bugs, etc please use CombatAce forum or send me a PM.
Hope you enjoy it.
Michael (Gepard)
Made in Germany
27. April 2023
Submitter Gepard Submitted 12/31/2022 Category Full Terrains
-
By Gepard
Rio de la Plata terrain version 1.3
*****************************************************
++++++++++++++++++++++++++++++++++++++++++
This terrain is written for SF2NA and SF2E or SF2I.
+++++++++++++++++++++++++++++++++++++++++
I. Short description:
This terrain covers the Bay of the river Rio de la Plata. South of this bay we find Argentina, north of it Urugay and Brazil. East of it is the Atlantic Ocean.
The timeframe of the terrain is from 1980 to 2020.
It is made as a NavalMap with carrier vs carrier operations in mind.
The scenario is, that in 1982, the Royal Navy answered the argentinian invasion on the Falkland islands with sending a Naval Task Force toward Buenos Aires and landing troops on the shores of Argentina.
Thatswhy you find a big british beachhead on the map.
You can fly following missions for the British and their allies, the Brazilians:
SWEEP,CAP,ESCORT,INTERCEPT,STRIKE,SEAD,ANTI_SHIP,RECON,CAS,Armed_Recon
For the Argentinians you can fly this missions:
SWEEP,CAP,ESCORT,INTERCEPT,STRIKE,SEAD,ANTI_SHIP,CAS,RECON
New in vesion 1.2:
- number of target area increased from 37 to 47
- all target areas are now fitted with objects. Factories, warehouses, commbuilding etc.
- Airbase Tandil moved 75 km westward. It is not yet at the correct position. I fear, that if the base is placed at the correct position, the AI would not use it, because it is to far in the west.
- At the former position of Tandil Airbase i placed a temporary aifield.
- I added the river Rio Paradana and the neigbour rivers.
- I relocated Montevideo and the Montevideo Airport. The airport is completly new made.
- I reworked all rivermouth tiles, enlarged them to 1024x1024 pixel size.
New in version 1.3
- number of targetareas increades to 82
- a lot of new factory target areas for Argentina
- included uruguayan airbases
- included static Cessna for airfield "population
- included some goodies
++++++++++++++++++++++++++++++++++++++++++++++++
II. INSTALLATION:
To run this terrain you need SF2NorthAtlantic and SF2 Israel or SF2 Europe.
Unzip all files into your saved game folder ...ThirdWire\StrikeFighters2XXXX
Thats it.
If you have SF2Europe installed you must do nothing more.
If you miss SF2E and have SF2Israel you must open file
Rio_de_la_Plata_Bay.ini
with Notepad editor and look for the lines:
//CatFile=..\IsraelME\IsraelME.cat
CatFile=..\GermanyCE\GermanyCE.cat
change the entry into:
CatFile=..\IsraelME\IsraelME.cat
//CatFile=..\GermanyCE\GermanyCE.cat
save the file
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
II.A: Goodies
I have made a new mainscreen and included a new mainscreensound. Check it out and if you like it then copy the folder Menu to your SF2 mod installation
If you own the TK's DLC28 and SF2Israel, you can use the MirageIIIEA and MirageIIIEBR, which you also find in the goodies folder. Simply copy to your objects folder.
++++++++++++++++++++++++++++++++++++++++++++++++++
III. Credits.
Tileset is basing on Starys Green Hell 3.0 tileset. I converted it to jpg format and
merged the 512x512 tiles to 1024x1024 pixel tiles.
Tileset green made by Wilches
GK-CG1 civil airport building made by GKABS
GK-CMT civil airport building made by GKABS
GK-CT1 civil airport building made by GKABS
Base_C.lod round parking area taken from AirfieldDevKit_v1.1, made by Pureblue
Base_H.lod small parking area taken from AirfieldDevKit_v1.1, made by Pureblue
ControlTower.LOD made by RussoUK
Modern Royal Navy ship pack made by WhiteBoySamurai
i added shipnumbers and converted the bmp to jpg files, corrected the hitboxes
ARA 25 de Mayo made by Torno for original 25 de Mayo CV, - upgrades by paulopanz
i made the angle deck and the Flak working and converted the bmp to jpg files
TAM made by SUICIDAL & Torno, taken from SF2 Tanks Pack
i converted the bmp to jpg files
TAM_Roland made by Gabilon, i made a new skin
Unimog made by BANIDOS TEAM and SUICIDAL
i converted the bmp to jpg files
GearingFRAM1B_ Argentina stock ship of SF2NA, made by TK, modded by me
SumnerFRAM2_Argentina stock ship of SF2NA, made by TK, modded by me
Fearless Class Austin, stock ship of SF2NA, made by TK, modded by me
Cleveland class made by YEYEYE (General Belgrano), modded by me
Leopard1A5_Brazil LOD file made by Gabilon, skin made by me
Gepard_Brazil LOD file made by Gabilon, skin made by me
Factory buildings Made by Geezer
Refinery1,2 and Factory-2 Made by Wingwiner, i renamed the files
Techniker made by Geezer, moded by me
Mainscreensound mady by Andrius Klimka
A special Thank you goes to Wilches and Snowburn for their support.
I hope i have not forgotten someone.
.
++++++++++++++++++++++++++++++++++++++++++++++++
IV. This Terrain is Freeware. Commercial use is not allowed.
And i say it again for the YAP, YankeeAirPirates file thiefs, the usage of this terrain and/or parts of the terrain for commercial use is not allowed!!!!!
+++++++++++++++++++++++++++++++++++++++++++++++++
V.
For remarks, comments, bugs, etc please use CombatAce forum or send me a PM.
Hope you enjoy it.
Michael (Gepard)
Made in Germany
27. April 2023
-
By GKABS
View File Su-35SK2 with Chinese Weapons
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Su-35SK2 with Chinese Weapons
Weapons:
PL-10
PL-12
PL-15
PL-21
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist (If you don't have the WAV sound added) under the Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=GSH301
[GSH301]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help, please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Model by g00r00
I would like to thank Coupi and Compufat for working alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
YEYEYE for the Cockpit
I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
All Chinese weapons are made by angelp. thank you.
Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Mixamo
If you need any assistance please contact me at
gkabs@gkabs.net
gulfknights.net
Submitter GKABS Submitted 04/22/2023 Category Su-35
-
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Su-35SK2 with Chinese Weapons
Weapons:
PL-10
PL-12
PL-15
PL-21
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist (If you don't have the WAV sound added) under the Flight directory and change the XXX with the correct number
[SoundList]
SoundFileXXX=GSH301
[GSH301]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help, please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Model by g00r00
I would like to thank Coupi and Compufat for working alongside me on this project. Work from 3d modeling, texture, data file, and testing. I enjoyed working with each of you on this together.
YEYEYE for the Cockpit
I would like to thank Coupi and Compufat this is group work from 3d modeling, texture, data file, and testing it's too hard to say how to get credit for but I tell you that everyone had a hand in this project and without them all you wouldn't have it.
All Chinese weapons are made by angelp. thank you.
Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Mixamo
If you need any assistance please contact me at
gkabs@gkabs.net
gulfknights.net
-