Geary

2 Fictional Sabres and 1 Fictional Fury for SF1
 
You will need columns5's FJ-3M Fury from here: http://combatace.com/files/file/525-fj-3m-fury-addon/
 
This pack contains files to convert the FJ-3M Fury to:
 
1 - A USN FJ-3B Attack Fury, a fictionalized version of the real USN FJ-4B Fury ground attack variant of the FJ-4 Fury - capable of carrying AGM-12B Bulpup Air-to-Ground missiles; Aero 7D_FFAR Pods; AIM-9B Air-to-Air Missles; various and sundry bombs, rocketpods, etc....
 
2 - An F-86B Attack Sabre. The USAF version of the above USN FJ-3B ground attack jet.
 
3 - An F-86G Sabre. The USAF version of the FJ-3M - 4x20mm nose guns and 2xAIM9B Air-to-Air missiles.
 
You will need to install the FJ-3M for each of the above planes you want to install. If you want to install all three planes, you will need to install the FJ-3M three times.
 
 
INSTALLATION:
Install the FJ-3M once and rename the installed FJ-3M folder to FJ-3B.
 
Install another FJ-3M and rename that folder to F-86B.
Install one more FJ-3M and rename that folder to F-86G.
Drop the corresponding folders from this pack into the newly created FJ-3B, F-86B and F-86G folders and overwrite the old files when asked.
 
 
To add extra pylons for the FJ-3B and F-86B I used ravenclaw_007's execellent F-86 Bomb Rack weapon from his Canadair CL-13B Mk6 Sabre early or Canadair CL-13B Mk6 Sabre late.
They can be found here: http://combatace.com/files/file/7387-canadair-cl-13b-mk6-sabre-late/ and here: http://combatace.com/files/file/7384-canadair-cl-13b-mk6-sabre-early/. Either one will do as they both have the F-86 Bomb Rack.
They are also both execllent planes and if you haven't flown them you are missing out on two of the best F-86 versions available at CA.
 
 
You must install the bomb rack as a weapon. The necessary lod's, ini's, weapon data entries and instructions are in ravenclaw_007's download.
 
 
You will need to ensure you have the necessary weapons, ie. AGM-12B, AIM-9B, Aero 7D_FFAR Pod, etc. Look in the *_loadout.ini files to see what weapons are needed. Most are found in common weapons packs or are already default weapons.
 
 
Included in this pack are the relevant .ini files to convert the FJ3M. Also included are an FJ-3B skin for VA-146, a real FJ-4B unit and two skins for the the F-86B/G models. VA-146 skin was created by me. The F-86 SEA skin was inspired by Dave's/Wrench's SEA F-86 skin.
 
 
Decals are, for the most part, default. They will depend on which SF1 install you put these planes in. You may end up changing some of the numbers.
 
 
Thanks to Dave "USAFMTL" Slavens for the idea. Years ago he created an FJ-4B fury from a FJ-3M. I found it at AVSIM while browsing the ancient Strike Fighters section.
Thanks to ravenclaw_007 for the F-86 Bomb Rack that makes the 'B models possible.
Thanks to Zur and column5 for the FJ-3M Fury.
And thanks to all those that have inspired and coached me to be able to do this.
 
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
If you find any problems with this release, please PM me. If you improve it, please PM me a copy. Any questions, PM me.
 
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
Geary

USAF A-7A Corsair II and F-8A Crusader 'Fictional Circa 1963' Skins for TW A-7A and F-8C AC.
 
These are separate aircraft that use the ThirdWire SF2 A-7A and F-8C lods and cockpit/avionics and various other files.
 
This file contains the relevant .ini files to convert them to USAF aircraft Circa 1963. The loadout.ini calls for the AIM-4G. You will have to obtain it from whichever weapons packs here at Combat Ace contains it.
 
They were built from a SF2 5+2 merged install and use stock decals and other stock references.
 
They are in .jpg format for SF2.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the A-7A_AF and F-8A_AF folders into your aircraft folder. Choose the desired skin in the loadout section. Fly.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to Spinners for the inspiration for these skins and to all who are helping me learn to skin by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

A-7E_FN 'What-If' French Navy Blue Skin for SF2.
 
Created to fly with the ThirdWire SF2 DLC F-8E_FN as a Strike and Escort package.
 
Uses TW DLC F-8E_FN Decal numbers. You can of course re-decal with other numbers and decals.
 
All other decals are default from a SF2 full 5+2 merged install.
 
Painted using Wrench's 3w A-7E templates. Thank you Wrench for the easy-to-use template.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to all who are helping me 'learn to skin' by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
 
Geary

Fictional AT-6G Mosquito skin for SF1 & SF2.
This is a What If SEA skin for Wrench's AT-6G Mosquito mod found here: http://combatace.com/files/file/9082-at-6g-texan-mosquito-fac/
It is Wrench's mod to Bunyap's T-6 Texan. You will need this file for the plane, weapons and decal numbers.

Bunyap's T-6 Texan is a bit old and has a few malfunctions such as a shadow line and no texture mapping for the tires, etc. But it looks good in the air.
If you would like my .psd layer mods to Wrench's template, PM me.
 
Thanks to Bunyap for the plane and Wrench for the Mosquito mod and templates.
Any questions, please ask.
Enjoy,
Geary

F-106A SEA Camo 'What-If' Skin.
 
 
 
This is Cliff7600's SEA Camo skin for the F-106A Delta Dart by Pasko, Column5 and Kesselbut. It's being released with his permission.
 
The skin textures are in .bmp format and should work in both SF1 and SF2.
 
Thanks to Cliff7600 for allowing me to release this skin and to the model-making team for their great plane.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your F-106A folder. Choose the desired skin in the loadout section. Fly.
 
This skin is being released under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact Cliff7600 first.
 
 
Geary

Templates for Pasko's and Column5's F-106A Delta Dart.
 
Original SF1 aircraft can be obtained here: http://combatace.com/files/file/5210-f-106a-delta-dart/.
 
SF2 aircraft conversion can be obtained here: http://combatace.com/files/file/14246-f-106a-delta-dart-for-sf2/.
 
These are .psd files with redrawn panel lines and rivets. You will need a paint prgroam such as Photoshop or Gimp that can read .psd files. You also need to know how to work with layers.
 
The lines and rivets are painted in pure black with a second offset underlayer in pure white. The opacity for all is adjustable.
 
The Wing.psd is mirrorred. It serves both left and right wings.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to Pasko and Column5 for this great airplane.
 
And thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Enjoy.

F-106A USAF & IDF Desert Camo 'What-If' SF2 Skins.
 
 
These skins are for the F-106A Delta Dart by Pasko, Column5 and Kesselbut.
They are repaints of Cliff7600's F-106A SEA skin.
Thanks to Cliff7600 for allowing me to repaint his great SEA skin and to the model-making team for their great plane.
The skins are in .jpg format for SF2 and use decals from a 5+2 merged install.
There are 2 skins:
1 USAF Desert Camo and
1 IDF 3-tone Camo.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your F-106A folders. Choose the desired skin in the loadout section. Fly.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
 
Geary

F-80/T-33/F-94 'What-If' USAF 2-Tone Early Desert and Jungle Camo Skins.
 
These skins are for Pasko's F-80, T-33 and F-94.
 
They were painted using Wrench's template of Pasko's F-80/T-33/F-94. They were patterned after Gramp's T-33 Luftwaffe skin.
 
These skins are in .jpg format for SF2 and use default decals from a full 5+2 merged install.
 
Thanks to Pasko for the plane, Wrench for the Templates and Gramps for the skin these were patterned after.
 
NOTE: There are some mesh distortions on these planes that show up as dark lines/scratches. I can't fix these with paint.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folders into your F-80/T-33/F-94 folders. Choose Desert Camo or Green Camo in the loadout section. Fly.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

Redrawn Lines, Rivets, etc.. for the beautiful F-84E/G Thunderjet by RussoUK2004.
It can be used for SF1 or SF2.
This template is a Photoshop .psd file at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers.
The only skin with this template is USAF Natural Metal / Aluminum.
Add your own paint, dirt, details and weathering.
If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
 
Credit and Thanks to RussoUK2004 for this nifty little jet and Wrench for the colorful skins he's made for it.
 
INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
 
Geary
 

Redrawn Lines, Rivets, etc.. for the Mirage Factory's beautiful little F-84F Thunderstreak.
It can be used for SF1 or SF2.
This template is a .psd file at 4096 pixels. It can be reduced for those with low spec computers.
It was made using Photoshop. It has redrawn lines, rivets and various bits.
I had completed about half of this template when I discovered PappyChkSix's template and beautiful skins. Kicked myself repeatedly and at great length but I was also happy to discover the skins. Some of this template is based on and inspired by his original template and works.
The only skin with this template is USAF Natural Metal / Aluminum.
If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
Add your own dirt, details and weathering.
Credit and Thanks to the Mirage Factory for this great little jet.

INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
 
Geary

F-86 Sabre Skins Pack 1 for SF1
Four F-86 Sabre clean skins:
1 = 3-tone Desert Camo - Fictional
1 = 2-tone Desert Camo - Fictional
1 = 3-tone SEA Camo - Semi-Fictional
1 = Silver - Non-Fictional
 
These skins are fairly clean as I'm not very good at weathering so feel free to add your own dirt.
 
They were made using my F-86 Sabre/FJ-3 Fury templates. They are in .bmp format for SF1 but they might work in SF2 with a bit of tweaking.
 
They use a mixture of default and other Sabre/Fury skin decals. As I can't release other peoples decals without their consent, you will need to find some of the decals in other Sabre/Fury releases.
 
There is included a clean skin for those that wish to use it. Just drop it into your existing Tank_F86 weapons folder. Overwrite when asked.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skins folders into your F-86 aircraft folder.
 
They were inspired by:
 
Dave
Wrench
PappyChkSix
Column5
paulopanz
ravenclaw_007
Tazkiller
DanW
howling1
Zur
 
and MANY others who've contributed skins to this wonderful plane.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with this release, please PM me. If you improve it, please PM me a copy.
Geary

F-86K IDF 'What-IF' 3-Tone Camo Skin.
 
 
This skin is for the F-86K/D/L Sabre by Bunyap, Fubar512. Original 3D model by Zur.
 
This skin textures are in .jpg format. It uses SF2 Israel decals.
 
(It 'should' work in SF1 by converting the .jpg's to .bmp's and re-decaling using your SF1 Wings Over Israel decals.)
 
It was painted using the F-86D/K/L templates by suhsjake and bobrock.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your F-86D, K or L folders. Choose IDF Camo in the loadout section. Fly.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

'What-If' USAF F-8E Crusader SEA Skin for SF2.
 
This skin is for the ThirdWire F-8E Crusader from SF2 Vietnam or any or all SF2 games with an F-8E.
 
It is modded for the USAF. It is a stand alone F-8E_AF aircraft. The relevant .ini files are included.
 
It uses decals from the SF2 Vietnam A-7D.
 
It is in .jpg format.
 
It may fit other SF2 Crusader models but it was not tested on any other F-8s.
 
It may work in SF1 if converted to .bmp and re-decaled with SF1 decals. This also was not tested.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the F-8E folder into Aircraft folders. Choose the desired skin in the loadout section. Fly.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

Redrawn Lines, Rivets, etc.. for the Geo's F8F Bearcat.
It can be used for SF1 or SF2.
Add your own paint, dirt, details, decals and weathering...
I can't remember why I made this template (I must have had some extra rivets laying around) as there are already some excellent skins for this plane by Geo, Pappychksix, paulopanz and Wrench and much of this template was based on some of those skins. 
This is a WIP-Finish-It-Yourself template and is in Photoshop .psd format at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers. It's still a bit rough around the edges, but you can smooth out any rough edges to your desires.
-----------------------------
If you want to make the lines and rivets darker or lighter, this template allows you to do that by adjusting the opacity of the lines, rivets or any layer of this file. You can also 'Click' off any layer you don't wish to use, such as the rivets layer if you don't wish to have any rivets. To use it you must have a paint program that reads/modifies .psd files.
Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
---------------------------
Credit and Thanks to Geo for this nifty little jet.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 
If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
Geary

FJ-3M Fury Skins Pack 1 for SF1
 
You will need the columns5's FJ-3M Fury mod to Zur's F-86 Sabre for these skins here:
http://combatace.com/files/file/525-fj-3m-fury-addon/
 
Five FJ-3M Fury clean skins:
 
1 = VF84 - FJ-3M - Repaint of pappychksix/Wrench's VF-84 skin.
1 = VMF232 - FJ-3M - Semi-Fictional Repaint of David "USAFMTL" Slavens' FJ-4B DBF skin.
1 = VMF312- FJ-3M - Repaint of pappychksix/Wrench's VMF-312 skin.
1 = USN Blue Camo - Fictional - FJ-3M - Repaint of Mitch's F-86F_German skin.
1 = VMF122 - FJ-2 - Semi Fictional Repaint of VMF122 standalone skin I have but I don't know where I got it or who the original author is. If anyone know's whose skin this is, please tell me so I can credit them. VMF-122 actually used this skin on their FJ-3's. I wanted an FJ-2 Fury to compliment the Navy Blue Phantoms, Banshees, Skyraiders, etc. of the Korean War era. So I downgraded a FJ-3M to an FJ-2.
 
DECALS: These skins use a mixture of default and other Fury skin decals. As I can't release other peoples decals without their consent, you will need to find some of the decals in other Fury releases. PM me if you need help with these.
 
For the VF-84 and VMF-312 skins, use the decals from pappychksix's Fury Package here:
http://combatace.com/files/file/2255-fury-package/ ... OR ... Wrench's SF2 FJ-3M Package here: http://combatace.com/files/file/12233-fj-3m-fury-by-zur-and-co-for-sf2/
 
For the VMF232 skin I have NO idea where I got the decals to use for this skin. But probably from pappychksix/Wrench's Fury packs. Choose your own.
 
For the USN Blue Camo fictional skin, use which ever declas you like. I used TW default decals for my skin and probably some from pappychksix/Wrench's Fury packs.
 
For the VMF122 skin ... I have a stand alone VMF122 skin I repainted. I think I used the decals from this original skin. I used VMF232 numbers, but you can use whichever you wish. The problem is the original skin doesn't have a readme and I can't find where I got it from. Anyone who know's the original author please pm me where it can be found so I can post that information here.
 
These skins are fairly clean as I'm not very good at weathering so feel free to add your own dirt. To repaint some of these skins such as the VF-84, VMF232 and VMF312, I had to paint over the existing paint to eliminate the old panel lines and rivets. Unfortunately, this means I also painted over the great weathering on these skins. I apologize to the artists of the original skins.
 
They were made using my F-86 Sabre/FJ-3 Fury templates. They are in .bmp format, 2048x2048 for SF1 but they might work in SF2 with a bit of tweaking. You can of course make them smaller if your computer can't handle the large size. If you have trouble making them smaller, pm me and I'll see what I can do.
 
 
There is included a clean drop tank skin for those that wish to use it. Just drop it into your existing Tank_F86 weapons folder. Overwrite when asked. Also a clean skin for the FJ-2 Navy Blue VMF-122 Tank-FJ2.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skins folders into your FJ-3M aircraft folder. If you want the blue FJ-2 VMF-122 drop tank, you will have to add the Weapondata entry to your install's weapondata.ini and run the weapon editor. Drop the Tank_FJ2.bmp and Tank_FJ2.lod into your weapons folder.
 
They were inspired by:
 
Dave
Wrench
pappychksix
column5
paulopanz
ravenclaw_007
Tazkiller
DanW
howling1
suhsjake
Mitch
Zur
and MANY others who've contributed skins and mods to this wonderful plane.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with this release, please PM me. If you improve it, please PM me a copy.
Geary

Korean War RF-51D for SF1
 
For those of us that still fly SF1, who still enjoy the old Korean War mod and who don't have this photo-recon plane.
(Those round black circular things on the left mid/tail section of the plane are supposed to be there. They are the cameras and they are placed in the generally correct areas.)
(This should work fine in SF2. But Wrench has an SF2 RF-51D for Korea in the download section for those that want one for SF2.)
Credit and Thanks to:
Wolf257 - for the P-51D model.
Diego - for the Korean War era pilot.
ErikGen - for the F-80 seat.
Wrench - for the decals and the original skin I adapted/repainted from his SF2 RF-51D.
? - for the P-51 108 gallon drop tank. (Sorry, I don't know who created this but I think it came in an old weapons pack.)
? - I don't know who created the updated cockpit for this model/.lod but God Bless you.
* - The many who created skins, mods, etc for Wolf257's P-51D that I've borrowed from or was inspired by.
Geary - for the new lines, rivets, paint, cameras, new drop tank skin, etc...
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your Korean War install. If you don't already have the weapon information in your weapondata.ini file, add it. Run the SF1 Weapons Editor. Fly.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 

Geary

Semi-HiRez Templates for Pasko and Column5's La-15 Fantail
 
For SF1 and SF2.
 
Redrawn Panel Lines and Rivets at 1024 pixels in layered PSD format. You must have a program that recognizes and works with PSD layers to work with this template. Two free programs, Gimp and Paint.net work with PSD layers.
Opacity adjustable for both lines and rivets layers.
 
It's and old plane and has a couple of lod inconsistencies but it's the only Fantail we have.
 
I have no references for this plane so there's not a lot of detail in the templates
.
Add your own paint, dirt and weathering.
 
Thanks to Pasko and Column5 for this early soviet jet.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

Semi-HiRez 1024 Templates for Pasko's MD-450 Ouragan
 
For SF1 and SF2.
 

Based on Wrench's original MD-450 template
.
 
Redrawn Panel Lines and Rivets at 1024 pixels in layered PSD format. You must have a program that recognizes and works with PSD layers to work with this template. Two free programs, Gimp and Paint.net work with PSD layers.
 

Opacity adjustable for both lines and rivets layers.
 

It's and old plane and has a couple of lod inconsistencies such as the lower right aileron isn't mapped correctly but it's the only Ourgan we have.
 

I have no references for this plane so there's not a lot of detail in the templates.
 

Add your own paint, dirt and weathering.
 

I've left Wrench's original skins in the template to make it easier to repaint them.
 

Thanks to Pasko for this great little plane and to Wrench for the original template
 
.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it please share with the community.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 

Geary

Redrawn Lines, Rivets, etc.. for the P-47N-15 Thunderbolt by RussoUK2004.
It can be used for SF1 or SF2.
Add your own paint, dirt, details and weathering.
This template is a Photoshop .psd file at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers. It was based on RussoUK2004's template.
The only skin with this template is USAF Natural Metal / Aluminum.
If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
Credit and Thanks to RussoUK2004 for this classic plane.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
 
Geary

Redrawn Panel and Rivet Lines for Veltro2k's P-39 and P-400 Airacobra's.
 
They are in .psd format.
 
Thanks to Veltro2k for the great little birds.
 
Enjoy.
 
 
 
Geary

These were redrawn over the ThirdWire SF2 MiG-15bis SOVIETSILVER1 skin.
They are in .psd format. You need a paint program that uses .psd formats and you need to know how to add .psd layers to skins to use the panel lines and rivets on other MiG-15 skins.
If you don't understand how to use them, PM me and I'll try to help you.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

Redrawn Panel Lines and Rivets Templates for the TW SF2 MiG- 17.
These were redrawn over the ThirdWire SF2 MiG-17 SOVIETSILVER1 skin.
They are in .psd format. You need a paint program that uses .psd format and you need to know how to add .psd layers to skins to use the panel lines and rivets on other MiG-17 skins.
If you don't understand how to use them, PM me and I'll try to help you.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary

Korean War RF-86A for SF2 and SF1
RF-86A Sabre of the Korean War Poject Ashtray.
 
There is one zipped file for SF2 and one for SF1 in this download package.
 
Information on this project is and it's predecessor, Project Honeybucket, is schetchy. As gun removal seems to have been personal choice and changed throughout these projects I chose to leave the top four guns inplace as described at one of the few sites with information. Remove any or all guns as you desire.
 
Credit and Thanks to:
Zur - for the F-86 model and drop tanks.
yakarov79 - for the fake pilot 3D cameras, photos and project info.
Diego - for Korean War era pilot.
Wrench - for the decals, original skin I adapted/repainted and cockpit mod for the F-86A.
ravenclaw007 - for his F-86 template I borrowed text and other details from.
regula50 - for the correct plane numbers and project info.
FastCargo - for the Fake Pilot.
Geary - for new panel lines, rivets, paint, ini modifications, etc...
 
The cameras on the SF2 model are 3D .lods using .jpg format texture.
As the .lod's and .jpg's aren't recognized by SF1, those cameras are painted on.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
 
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your Korean War install. If you don't already have the weapon information in your weapondata.ini file, add it. Run the SF1 Weapons Editor. Fly.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Geary

SF1 F-80C/T-33A/F-94B/RF-80A Korean War Skin Pack

For Pasko/Gramps/Column5's F-80C/T-33A/F-94B models.
Updated skins for SF1 Korean War install.
Contains Korean War skins for the following aircraft and units:
F-80C Shooting Star:
35th FBS
36th FBS
80th FBS
F-94B Starfire:
68th FIS
RF-80A Photo/Recon Shooting Star:
15th TRS
T-33A Shooting Star Trainer, Hack & FAC:
35th FBS
36th FBS
80th FBS
(These T-33A skins are fictional.  I've found very little info/pictures of T-33's in the Korean War.  What I have pieced together says T-33's were used as trainers, taxi's, forward air controllers and whatever the unit wanted or was able to do with them.  I painted these with a little poetic license to match the 3 F-80C unit skins provided in this download.)
These skins are in BMP format at 1024 x 1024 pixels.
These are old models and have a few anomolies such as bleeding color from templates.

Thanks and credit goes to:
Pasko/Gramps/Column5 - for the aircraft models.
Wrench - for the decals and skins from the SF2 KAW skins pack for EricGen's SF2 F-80C/T-33A/F-94B/RF-80C from which I borrowed.  Also for the original Templates I modified.
PauloPanz - for the 68th FIS skin for ErikGen's SF2 F-94B from which I borrowed pieces.
pappychksix - for original SF1 F-80C Korean War pack skins I repainted.
Muesli / pappychksix(?) - for OD Green Camo skin I modified/repainted for the RF-80A.
Geary - for reworking everyone else's work; new lines and rivets, etc.; repaints; cameras on RF-80A; small tweaks.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's work or property or claim it as my own.  Please contact me to correct any error.

INSTALLATION:  You must have Pasko/Gramps/Column5's F-80C/T-33A/F-94B models.  They can be found in the CA SF1 download section.  Unzip this download to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the slin folders into their corresponding aircraft folders in your SF1 Korea install. Fly.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. Otherwise, please give credit to those due it. 

If you find any problems with it, please PM me.  If you improve it, please share. 
 
Geary

Redrawn Panel Lines & Rivets for SF1 Era F-86 Sabres and FJ-3 Furies.
 
This is a .psd file at 2048 x 2048 pixels. You MUST have a software program that allows you to modify .psd files, such as Photoshop or GIMP. (There may be other programs out there that deal with .psd files, but I'm not aware of them.)
 
You must also understand how to work with layers.
 
The lines and rivets are drawn in pure black but the opacity can be adjusted to fit your likes.
 
NOTE: This template can be used for skins for the SF2 KAW Sabres/Furies but because of the LOD's the skins are shiny and the lines don't show up well.
 
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
 
If you find any problems with it, please PM me. If you improve it, please PM me a copy.
 
Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
 
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
 
Geary