JulioJunqueira

The Blue Max Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from The Blue Max film.
- Fokker Dr.1 flown by the character Bruno Stachel.        (Several versions)
- Fokker Dr.1 flown by the character Willi von Klugermann. (Several versions)
The character Bruno Stachel used two Fokkers in the Blue Max film, one with the cowling painted full black and other with the
cowling tip in black. 
You will find both of them in the skin pack.
- I did Optional hangar screens for Bruno Stachel and Willi von Klugermann characters. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN" folder of each character. 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Bruno Stachel
Name=Bruno Stachel
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Willi von Klugermann
Name=Willi von Klugermann
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000

Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Stachel HANGAR 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Fly Boys Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from Fly Boys film.
- Fokker Dr.1 flown by the character Black Falcon.
- Fokker Dr.1 flown by the character Franz Wolfert.
- I did Optional hangar screens for Black Falcon and Franz Wolfert. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN" folder of each character. 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Black Falcon
Name=Black Falcon
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Franz Wolfert
Name=Franz Wolfert
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000

Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Wolfert-HANGARSCREEN 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 
,

 

The Great Waldo Pepper Fokker Dr.1 skin for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A skin to FokkerDr1 by Third Wire Productions used by The Great Waldo Pepper film.
- Fokker Dr.1 flown by the character Ernst Kessler.
- I did Optional hangar screens for Ernst Kessler character. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN". 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Ernst Kessler
Name=Ernst Kessler
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Kessler-HANGARSCREEN 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Geezer German pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2
This pack presents some German Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find several options for German uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew2", "wwiPilotNew3", "wwiPilotNew5", "wwiPilotNew6", "wwiPilotNew7" and "wwiPilotNew8", with the historical pilots names (ex: Kurt Wolff) or generic names such as GERMANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this German pilots skin Pack:
- 13 Germans Aces: 
- Ernst Udet                 (Geezer wwiPilotNew5) 
- Josef Jacobs           (Geezer wwiPilotNew5) 
- Josef Mai                  (Geezer wwiPilotNew5) 
- Julius Buckler           (Geezer wwiPilotNew5) 
- Kurt Wolff                  (Geezer wwiPilotNew5)
- Kurt Wusthoff           (Geezer wwiPilotNew5)
- Max Immelman        (Geezer wwiPilotNew5)
- Oswald Boelcke       (Geezer wwiPilotNew5)
- Otto Parchau            (Geezer wwiPilotNew5)
- Paul Baumer             (Geezer wwiPilotNew5)
- von Richthofen         (Geezer wwiPilotNew5)
- von Schleich             (Geezer wwiPilotNew5)
- Werner Voss             (Geezer wwiPilotNew5)
- 4 fictional characters from films:
- Black Falcon                  (from Fly Boys film)                               (Geezer wwiPilotNew5)
- Bruno Stachel                (from Blue Max film)                             (Geezer wwiPilotNew5)
- Willi von Klugermann   (from Blue Max film)                              (Geezer wwiPilotNew5)
- Ernst Kessler                 (from The Great Waldo Pepper film)   (Geezer wwiPilotNew5)
- 10 German Aces using a British long leather coat (Geezer wwiPilotNew1) that I adapted to German service colors.
- Josef Mai 2                (wwiPilotNew1)
- Julius Buckler 2         (wwiPilotNew1)
- Kurt Wolff 2                (wwiPilotNew1)
- Kurt Wusthoff 2         (wwiPilotNew1)
- Max Immelman 2      (wwiPilotNew1)
- Oswald Boelcke 2     (wwiPilotNew1)
- Paul Baumer 2           (wwiPilotNew1)
- von Richthofen 2       (wwiPilotNew1)
- von Schleich 2           (wwiPilotNew1)
- von Schleich 3           (wwiPilotNew1)
- 1 fictive character using a British long leather coat (Geezer wwiPilotNew1) that I adapted to German service colors.
- Bruno Stachel 2     (wwiPilotNew1)
- 6 Germans pilots with generic face and several options for different scarf colors & a German uniform at your choice.
- GERMANPILOT1 (Geezer wwiPilotNew6) 
- GERMANPILOT2 (Geezer wwiPilotNew6)
- GERMANPILOT3 (Geezer wwiPilotNew7)
- GERMANPILOT4 (Geezer wwiPilotNew8)
- GERMANPILOT5 (Geezer wwiPilotNew2)
- GERMANPILOT6 (Geezer wwiPilotNew3)
 
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "GERMAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (GERMAN PILOTS INSTALLATION README) with installation instructions for the majority of German  aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (FokkerDr1) Aircraft folder and find the "FokkerDr1_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with FokkerDr1
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=von Richthofen             <------------------------------------ You must add this line
Position=0.00,-0.75,0.65                             <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for German pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew2), (wwiPilotNew3), (wwiPilotNew5), (wwiPilotNew6), (wwiPilotNew7) & (wwiPilotNew8). 
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________

Geezer RNAS-RAF pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some RNAS-RAF Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find several options for different scarf colors and a RNAS-RAF uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew3", "wwiPilotNew4", "wwiPilotNew5", "wwiPilotNew7" and wwiPilotNew8 with the historical pilots names (ex: Robert Little) or generic names such as RNAS-RAF PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this RNAS-RAF pilots skin Pack:
- 6 RNAS-RAF Aces: 
- Arthur Roy Brown        (Geezer wwiPilotNew5) 
- Bruno De Roeper         (Geezer wwiPilotNew5) 
- Geoffrey Siedle            (Geezer wwiPilotNew5) 
- Lawrence Coombes    (Geezer wwiPilotNew5) 
- Raymond Collishaw    (Geezer wwiPilotNew5) 
- Robert Little                  (Geezer wwiPilotNew5)
- 1 Knowed pilot without the Ace status:
- Colin MacLaren      (Geezer wwiPilotNew5)

- 6 RNAS-RAF pilots with a generic face and several options for different scarf colors and a RNAS-RAF uniform at your choice.
- RNAS-RAF PILOT1 (Geezer wwiPilotNew1) 
- RNAS-RAF PILOT2 (Geezer wwiPilotNew4) 
- RNAS-RAF PILOT3 (Geezer wwiPilotNew7) 
- RNAS-RAF PILOT4 (Geezer wwiPilotNew8) 
- RNAS-RAF PILOT5 (Geezer wwiPilotNew5)
- RNAS-RAF PILOT6 (Geezer wwiPilotNew3)
- 4 RNAS-RAF pilots: Geoffrey Siedle, Colin MacLaren, Arthur Roy Brown & Robert Little, using a British long leather coat (Geezer wwiPilotNew1). 
- wwiPilotNew18 - Geoffrey Siedle        - (Geezer wwiPilotNew1)
- wwiPilotNew20 - Colin MacLaren       - (Geezer wwiPilotNew1)
- wwiPilotNew23 - Arthur Roy Brown    - (Geezer wwiPilotNew1)
- wwiPilotNew24 - Robert Little             - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RNAS-RAF PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (RNAS-RAF PILOTS INSTALLATION README) with installation instructions for the majority of British & French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Arthur Roy Brown    <------------------------------------ You must add this line
Position=0.00,-0.20,0.75                         <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for RNAS-RAF pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________
  

Geezer United States pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some United States Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
 
You will find several options for different scarf colors and a United States uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8", "wwiPilotNew3" and "wwiPilotNew1" with the historical pilots names (ex: Frank Luke) or generic names such as US-PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this United States pilots skin Pack:
- 5 United States Aces:  
- Douglas Campbell            (Geezer wwiPilotNew5) 
- Edward Rikenbacker        (Geezer wwiPilotNew5) 
- Frank Luke                         (Geezer wwiPilotNew5) 
- Lawrence Callahan          (Geezer wwiPilotNew5) 
- Raoul Lufbery                   (Geezer wwiPilotNew5)
- 2 Knowed pilots whithout the Ace status:
- William Palmer              (Geezer wwiPilotNew5)
- William Wellman           (Geezer wwiPilotNew5) 
- 3 United States pilots: Edward Rikenbacker, Frank Luke & William Wellman, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to United States service & french service colors. 
- wwiPilotNew13 - Edward Rikenbacker  (Geezer wwiPilotNew1)
- wwiPilotNew14 - Frank Luke                   (Geezer wwiPilotNew1)
- wwiPilotNew28 - William Wellman        (Geezer wwiPilotNew1)
- 5 United States pilots with a generic face and several options for different scarf colors and a United States uniform at your choice.
- US-PILOT1  (Geezer wwiPilotNew5) 
- US-PILOT2  (Geezer wwiPilotNew3) 
- US-PILOT3  (Geezer wwiPilotNew4) 
- US-PILOT4  (Geezer wwiPilotNew8) 
- US-PILOT5  (Geezer wwiPilotNew7)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "UNITED STATES PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (UNITED STATES PILOTS INSTALLATION README) with installation instructions for the majority of United States, French and British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SPAD13_220) Aircraft folder and find the "SPAD13_220_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with SPAD13_220
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Edward Rikenbacker  <------------------------------------ You must add this line
Position=0.00,-0.85,0.62                           <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for United States pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________ 
  

Geezer Russian pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents the Ukrainian/Russian Ace Alexander Kozakov and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find different options for scarf colors at your choice.  The Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this Russian pilots skin Pack:
- 1 Ukrainian/Russian Ace: 
- Alexander Kozakov  (Geezer wwiPilotNew5) 
- 3 Russian pilots with a generic face and different scarf colors at your choice.
- RUSSIANPILOT1      (Geezer wwiPilotNew6) 
- RUSSIANPILOT2      (Geezer wwiPilotNew7)
- RUSSIANPILOT3      (Geezer wwiPilotNew8)
 __________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RUSSIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (RUSSIAN PILOTS INSTALLATION README) with installation instructions for the majority of Russian aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Alexander Kozakov    <------------------------------------ You must add this line
Position=0.00,-0.20,0.75                            <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Russian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew5), (wwiPilotNew6) & (wwiPilotNew8). 
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________
  

Geezer italian pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some italian Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
 
You will find several options for italian uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew3" with the historical pilots names (ex: Ernesto Cabruna) or generic names such as ITALIANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this italian pilots skin Pack:
- 4 Italian Aces: 
- Ernesto Cabruna             (Geezer wwiPilotNew5) 
- Francesco Baracca        (Geezer wwiPilotNew5) 
- Giovanni Ancillotto         (Geezer wwiPilotNew5) 
- Giovanni Nicelli               (Geezer wwiPilotNew5) 

- 10 Italian pilots with a generic face and several options for italian uniforms and different scarf colors at your choice.
- ITALIANPILOT1  (Geezer wwiPilotNew7) 
- ITALIANPILOT2  (Geezer wwiPilotNew5) 
- ITALIANPILOT3  (Geezer wwiPilotNew5) 
- ITALIANPILOT4  (Geezer wwiPilotNew5) 
- ITALIANPILOT5  (Geezer wwiPilotNew4)
- ITALIANPILOT6  (Geezer wwiPilotNew4)
- ITALIANPILOT7  (Geezer wwiPilotNew7)
- ITALIANPILOT8  (Geezer wwiPilotNew8)
- ITALIANPILOT9  (Geezer wwiPilotNew4) 
- ITALIANPILOT10 (Geezer wwiPilotNew3)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "ITALIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (ITALIAN PILOTS INSTALLATION README) with installation instructions for the majority of ITALIAN French & British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SVA5) Aircraft folder and find the "SVA5_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with To use with SVA5
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=ITALIANPILOT2    <------------------------------------ You must add this line
Position=0.0,-0.60,0.55                       <------------------------------------ You must add this line 
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Italian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________ 
  

Geezer Austro-Hugarian pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2 
This pack presents some Austro-Hugarian Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find several options for Austro-Hugarian uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew1" with the historical pilots names (ex: Godwin Brumowski) or generic names such as AUSTRO-HUNGARIANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this Austro-Hugarian pilots skin Pack:
- 3 Austro-Hugarian Aces: 
- Godwin Brumowski  (Geezer wwiPilotNew5) 
- Josef Kiss                  (Geezer wwiPilotNew5) 
- Franz Graser              (Geezer wwiPilotNew5) 

- 4 Austro-Hugarian pilots with a generic face and several options for Austro-Hugarian uniforms and different scarf colors at your choice.
- AUSTRO-HUNGARIANPILOT1 (Geezer wwiPilotNew5) 
- AUSTRO-HUNGARIANPILOT2 (Geezer wwiPilotNew8)
- AUSTRO-HUNGARIANPILOT3 (Geezer wwiPilotNew5)
- AUSTRO-HUNGARIANPILOT4 (Geezer wwiPilotNew6)
 
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "AUSTRO-HUNGARIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (AUSTRO-HUNGARIAN PILOTS INSTALLATION README) with installation instructions for the majority of Austro-Hugarian aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (AviatikD1) Aircraft folder and find the "AviatikD1_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with AviatikD1
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=AUSTRO-HUNGARIANPILOT4   <------------------------------------ You must add this line
Position=0.00,-1.12,0.55                                             <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Austro-Hugarian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew5), (wwiPilotNew6) & (wwiPilotNew8). 
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________
  

Geezer RFC-RAF pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some RFC-RAF Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find several options for different scarf colors and a RFC-RAF uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew2", "wwiPilotNew3", "wwiPilotNew4", "wwiPilotNew5", "wwiPilotNew7" and wwiPilotNew8 with the historical pilots names (ex: Albert Ball) or generic names such as RFC-RAF PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this RFC-RAF pilots skin Pack:
- 7 RFC-RAF Aces:   
- Albert Ball                          (Geezer wwiPilotNew5) 
- Arthur Rhys-Davids          (Geezer wwiPilotNew5) 
- Cecil Arthur Lewis            (Geezer wwiPilotNew5) 
- Edward Mannock             (Geezer wwiPilotNew5) 
- James McCudden           (Geezer wwiPilotNew5) 
- Lanoe Hawker                  (Geezer wwiPilotNew5)
- William Barker                  (Geezer wwiPilotNew5)
- 1 Knowed pilot without the Ace status:
- Alan Bishop Jarvis      (Geezer wwiPilotNew5)
- 7 RFC-RAF pilots with a generic face and several options for different scarf colors and a RFC-RAF uniform at your choice.
- RFC-RAF PILOT1 (Geezer wwiPilotNew5) 
- RFC-RAF PILOT2 (Geezer wwiPilotNew1) 
- RFC-RAF PILOT3 (Geezer wwiPilotNew2) 
- RFC-RAF PILOT4 (Geezer wwiPilotNew3) 
- RFC-RAF PILOT5 (Geezer wwiPilotNew4)
- RFC-RAF PILOT6 (Geezer wwiPilotNew8)
- RFC-RAF PILOT7 (Geezer wwiPilotNew7)
- 7 RFC-RAF pilots: James McCudden, Lanoe Hawker, Albert Ball, Arthur Rhys-Davids, Cecil Arthur Lewis, Alan Bishop Jarvis and Edward Mannock, using a British long leather coat (Geezer wwiPilotNew1). 
- wwiPilotNew15 - James McCudden          - (Geezer wwiPilotNew1)
- wwiPilotNew17 - Lanoe Hawker                 - (Geezer wwiPilotNew1)
- wwiPilotNew19 - Albert Ball                        - (Geezer wwiPilotNew1)
- wwiPilotNew26 - Arthur Rhys-Davids        - (Geezer wwiPilotNew1)
- wwiPilotNew29 - Cecil Arthur Lewis          - (Geezer wwiPilotNew1) 
- wwiPilotNew30 - Alan Bishop Jarvis         - (Geezer wwiPilotNew1)
- wwiPilotNew35 - Edward Mannock           - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RFC-RAF PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (RFC-RAF PILOTS INSTALLATION README) with installation instructions for the majority of British & French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your ( SE5a ) Aircraft folder and find the "SE5a_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with SE5a
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=James McCudden    <------------------------------------ You must add this line
Position=0.0,-1.150,0.699                        <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for RFC-RAF pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew2), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________
  
  

Geezer French pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2. 
This pack presents some french Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
 
You will find several options for french uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew1" with the historical pilots names (ex: Jean Navarre) or generic names such as FRENCHPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this French pilots skin Pack:
- 6 French Aces: 
- Georges Guynemer  (Geezer wwiPilotNew5) 
- René Fonck               (Geezer wwiPilotNew5) 
- Jean Navarre            (Geezer wwiPilotNew5) 
- Charles Nungesser (Geezer wwiPilotNew5) 
- Michel Coiffard       (Geezer wwiPilotNew5) 
- Gabriel Guérin         (Geezer wwiPilotNew5) 
- 7 French pilots with a generic face and several options for french uniforms and different scarf colors at your choice.
- FRENCHPILOT1 (Geezer wwiPilotNew5) 
- FRENCHPILOT2 (Geezer wwiPilotNew7) 
- FRENCHPILOT3 (Geezer wwiPilotNew4) 
- FRENCHPILOT4 (Geezer wwiPilotNew4) 
- FRENCHPILOT5 (Geezer wwiPilotNew4)
- FRENCHPILOT6 (Geezer wwiPilotNew5)
- FRENCHPILOT7 (Geezer wwiPilotNew8) 
- 3 French Aces: Georges Guynemer, Michel Coiffard & Charles Nungesser, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to french service colors. 
- wwiPilotNew16 - Charles Nungesser   - (Geezer wwiPilotNew1)
- wwiPilotNew27 - Michel Coiffard          - (Geezer wwiPilotNew1)
- wwiPilotNew32 - Georges Guynemer   - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "FRENCH PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (FRENCH PILOTS INSTALLATION README) with installation instructions for the majority of French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (Breguet14_FRANCE) Aircraft folder and find the "Breguet14_FRANCE_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with Breguet14_FRANCE
// Crew -----------------------
[Pilot]
PilotModelName=FRENCHPILOT2 <------------------------------------ You must add this line
Position=0.0,-1.07,0.88                     <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for French pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________ 
  

Kesselbrut & russouk2004 Me 109 cockpit textures pack for Strike Fighters 2 (WW2 modded games). 
I finished a pack for Kesselbrut & russouk2004 Me 109 cockpit, with new textures and new painting approach. 
I worked in one edition that russouk2004 did in this cockpit to represent a Me 109 "Jabo" versions with the "ZSK 244 A-2/Zünderschaltkasten" (ignition switch box for bombs). This is a switch box, more realistic for 109E/F/G/K versions, but you of course, are free to use wherever you wish.
The size of some instruments was slightly increased and TGA figures as well, for a better view of them. The cockpit 3D LODs are setted to use jpg files. 
I'm including also, 5 optional textures for the pilot's legs (Ger_legs). You will find it in the folder (OPTIONAL LEGS).
To use one of them just rename the file at your choice to ----> Ger_legs. 
__________________________________________________________________________________________________________
Installation instructions Strike Fighters 2:
First make a back-up or rename your "original cockpit folder". This is just in case you wish return with your former cockpit later. Then just drop or copy my folder "cockpit" in your Bf 109 aircraft folder of your choice.
__________________________________________________________________________________________________________
*OPTIONAL*
I slightly modded my MinPitchFront & my GunsightMilSize for a better cockpit and Gunsight views (see the screenshots).
If you wish to use my MinPitchFront & GunsightMilSize edition ini, Open your Bf-109 cockpit data.ini and make these following editions:
[GunsightFront]
GunsightMilSize=125  <----------------- you must to add this valor.

[CockpitSeat001]
MinPitchFront=-57    <----------------- you must to add this valor.
This is not mandatory. All cockpit files will work normally without this edition as well
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin textures (JPG & TGA files) for Me 109 cockpit.
- Kesselbrut & russouk2004 for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to Kesselbrut & russouk2004 for the excellent Me 109 cockpit model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Stephen1918 Fokker E cockpits for First Eagles 1
Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa cockpit pack for First Eagles 1. 
I did new textures and new painting approach for Stephen1918's Fokker E cockpits.
You will find, a new Spandau machine gun, a new Parabellum machine gun, Vrt, compass.bmp figures & a new Glass.tga and a complet new set of textures for Stephen1918' cockpits.
The Spandau, Parabellum machine gun, Vrt, compass and all gauges, still with the same size of the original aircraft & cockpits bmp files.
Inside the pack you will find folders for optional cockpit leather colors (Black & brown) for all these fokkers above.
To use one of them just rename one of your choice as: 
- BROWN LEATHER-FokECockpit.bmp  rename it as FokECockpit.bmp
- BLACK LEATHER-FokECockpit.bmp  rename it as FokECockpit.bmp
__________________________________________________________________________________________________________
Installation instructions for First Eagles 1 users: (cockpit & aircraft BMPs & TGA files)
First make a back-up or rename your original cockpit folder, the Spandau, Parabellum, Vrt, compass BMP figures and the Glass.tga figures. This is just in case you wish return with your former cockpit textures later. Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder.
That's all.
_________________________________________________________________________________________________________
*OPTIONAL*
I slightly modded my MinPitchFront for a little wide cockpit views (see the screenshots).
If you wish to use my MinPitchFront edition ini, Open your COCKPIT.ini and make these following editions:
[CockpitSeat001]
MinPitchFront=-80    <----------------- you must to add this valor.
This is not mandatory. All cockpit files will work normally without this edition as well
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin textures (BMP & TGA files) for Stephen1918' Fokker E cockpits.
- Stephen1918 for the Cockpit ini files.
__________________________________________________________________________________________________________
- special thanks to Stephen1918 for the excellent Fokker E cockpit models.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 

Laton's Fokker Eindeckers for First Eagles 2
Andre (Laton) Simpson Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa pack for First Eagles 2. 
This is a pack for Laton's Fokkers E, with 3D LODs setted to use jpg format. You still need all those Fokkers above installed in your FE 2 Aircraft main folder. This pack will only replace the original 3d LODs that still using BMP figures. 
Also, I Hexa edited the LODs files of Laton's Fokker EIIa that had wire wheels. I comverted them to wheel covers, as they were usually in combat areas. 
There is 4 optional (Vrt) used by Fokkers EI, EIa, EII, EIIa, EIV & EIVa  at your choice. You will find them on the folder "OPTIONAL PROPELLERS" .
(2 "Garuda" propellers, one "Integrale" propeller and one "Germania" propeller) To use one of them just rename it as "Vrt". 
I did, one new Spandau machine gun, one new Parabellum machine gun, Vrt, compass.jpg figures & a new Glass.tga textures.
The Laton's Eindeckers 3d LODs are setted to use jpg files. So you will be able to use my new Spandau, Parabellum, Vrt and compass in jpg format figures together with Stephen1918's Fokkers cockpits using JPGs textures.
__________________________________________________________________________________________________________
Installation instructions for First Eagles 2: ONLY FOR FE 2 USERS (Laton's Fokker E aircrafts 3d LODs using JPGs)
First make a back-up or rename all your "original Laton's Fokker E 3d LODs". 
Make a back-up or rename all your COMPASS.BMP, SPANDAU.BMP, VRT.BMP, PARABELA.BMP, SPANDAU_BARREL.BMP and GlASS.TGA files. 
Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder. 
*ATTENTION*
After this you must to convert all Fokker E "bmp" skin files that you are already have installed before to JPG format, using your favorite image editor.
That's all. 
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin textures (JPG & TGA files) for Laton's Fokker Eindeckers.
- Andre (Laton) Simpson for the Fokker Eindeckers 3D LODs.
__________________________________________________________________________________________________________
- special thanks to Andre (Laton) Simpson for the excellent Eindeckers models.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
 

Stephen1918 Fokker Eindecker cockpits for FE 2
Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa cockpit pack for First Eagles 2. 
I did new textures and new painting approach for Stephen1918's Fokker E cockpits 
The size of the instruments were slightly increased for a better view of them. The cockpit 3D LODs are setted to use jpg files. 
You will find, a new Spandau machine gun, a new Parabellum machine gun, Vrt, compass.jpg figures & a new Glass.tga textures.
There is 4 optional (Vrt) at your choice. You will find them on the folder "OPTIONAL PROPELLERS" .
(2 "Garuda" propellers, one "Integrale" propeller and one "Germania" propeller) To use one of them just rename it as "Vrt".
__________________________________________________________________________________________________________
I'm including also, here at CombatAce.com in a separated download only for FE 2 users with the Andre (Laton) Simpson's Fokker E 3d LODs, setted to use jpg files. So you will be able to use my new Spandau, Parabellum, Vrt and compass in jpg format figures together with Stephen1918 cockpit using JPGs textures. 
__________________________________________________________________________________________________________
Inside the pack you will find 3 folders for optional cockpit leather colors (Black & brown) for all these Fokkers above.
To use one of them just rename one of your choice as: 
- BROWN LEATHER-FokECockpit.jpg  rename it as FokECockpit.jpg
- BLACK LEATHER-FokECockpit.jpg  rename it as FokECockpit.jpg
__________________________________________________________________________________________________________
Installation instructions for First Eagles 2: ONLY FOR FE 2 USERS. (Stephen1918's cockpit 3d LODs USING JPGs)
First make a back-up or rename your "original cockpit folder". This is just in case you wish return with your former cockpit Textures and 3d LODs later. Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder.
That's all. 
_________________________________________________________________________________________________________
*OPTIONAL*
I slightly modded my MinPitchFront for a little wide cockpit views (see the screenshots).
If you wish to use my MinPitchFront edition ini, Open your COCKPIT.ini and make these following editions:
[CockpitSeat001]
MinPitchFront=-80    <----------------- you must to add this valor.
This is not mandatory. All cockpit files will work normally without this edition as well
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin textures (JPG & TGA files) for Stephen1918's Fokker Eindecker cockpits.
- Stephen1918 for the Fokker Eindecker Cockpit 3D LODs & ini files.
__________________________________________________________________________________________________________
- special thanks to Stephen1918 for the excellent Fokker E cockpit models.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 

Kesselbrut Me 109 cockpit textures pack for Strike Fighters 2 (WW2 modded games). 
I finished a pack for Kesselbrut's Me 109 cockpit, with new textures and new painting approach. 
The size of some instruments was slightly increased and TGA figures as well, for a better view of them. The cockpit 3D LODs are setted to use jpg files. 
I'm including also, 5 optional textures for the pilot's legs (Ger_legs). You will find it in the folder (OPTIONAL LEGS).
To use one of them just rename the file at your choice to ----> Ger_legs. 
__________________________________________________________________________________________________________
Installation instructions for Strike Fighters 2:
First make a back-up or rename your "original cockpit folder". This is just in case you wish return with your former cockpit later. Then just drop or copy my folder "cockpit" in your Bf 109 aircraft folder of your choice.
__________________________________________________________________________________________________________
*OPTIONAL*
I slightly modded my MinPitchFront & my GunsightMilSize for a better cockpit and Gunsight views (see the screenshots).
If you wish to use my MinPitchFront & GunsightMilSize edition ini, Open your Bf-109 cockpit data.ini and make these following editions:
[GunsightFront]
GunsightMilSize=125  <----------------- you must to add this valor.

[CockpitSeat001]
MinPitchFront=-57    <----------------- you must to add this valor.
This is not mandatory. All cockpit files will work normally without this edition as well
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin textures (JPG & TGA files) for Me 109 cockpit.
- Kesselbrut for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to Kesselbrut for the excellent Me 109 cockpit model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Kesselbrut Me 109 cockpit textures pack for Strike Fighters 2 (WW2 modded games). 
I finished a pack for Kesselbrut's Me 109 cockpit, with new textures and new painting approach. 
Releasing, optional textures for early Me 109 cockpit. The first Me 109s (B/C/D and early Es versions) had their interiors painted with the RLM 63 (grüngrau) which was later replaced by the RLM 66 (schwarzgrau). This option could be, very useful for the Me 109 made by Monty CZ.
The size of some instruments was slightly increased and TGA figures as well, for a better view of them. The cockpit 3D LODs are setted to use jpg files. 
I'm including also, 5 optional textures for the pilot's legs (Ger_legs). You will find it in the folder (OPTIONAL LEGS).
To use one of them just rename the file at your choice to ----> Ger_legs. 
__________________________________________________________________________________________________________
Installation instructions for Strike Fighters 2:
First make a back-up or rename your "original cockpit folder". This is just in case you wish return with your former cockpit later. Then just drop or copy my folder "cockpit" in your Bf 109 aircraft folder of your choice.
__________________________________________________________________________________________________________
*OPTIONAL*
I slightly modded my MinPitchFront & my GunsightMilSize for a better cockpit and Gunsight views (see the screenshots).
If you wish to use my MinPitchFront & GunsightMilSize edition ini, Open your Bf-109 cockpit data.ini and make these following editions:
[GunsightFront]
GunsightMilSize=125  <----------------- you must to add this valor.

[CockpitSeat001]
MinPitchFront=-57    <----------------- you must to add this valor.
This is not mandatory. All cockpit files will work normally without this edition as well
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin textures (JPG & TGA files) for Me 109 cockpit.
- Kesselbrut for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to Kesselbrut for the excellent Me 109 cockpit model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Nieuport 24bis skins of Escadrille 65 for EmID N24bis First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing Nieuports 24bis used by Escadrille 65.
Some serial numbers are historicals, others are not.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
** What you will find in this Nieuport N24bis skin Pack:
- A full set of skins & decals to Nieuport N24bis used by Escadrille 65.
- A full squadron (Escadrille 65) with 100 decal serial numbers and squadron markings, including the Nieuport 24bis flown by the French Ace Charles Nungesser. 
- 3 New optional hangar screens for Nieuport 24bis (N24bis) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24bis aircraft main folder, next, edit your N24bis.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 65-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 65-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 65-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24bis" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24bis" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24bis".ini file.
[TextureSetXXX]
Directory=ESC 65
Name=ESC 65
Nation=FRANCE
Squadron=65ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24bis.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24bis and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24bis model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24 skins of Escadrille 75 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 75.
- A full squadron (Escadrille 75) with 100 decal serial numbers. 
- A special skin folder focusing on Slt William Hérisson a french Ace with 11 victories. 
- 2 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file and add this line:
[AircraftData]
HangarScreen=ESC 75-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 75-HANGARSCREEN 02.jpg      <------ add this line to use the second option.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 75
Name=Escadrille 75
Nation=FRANCE
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 75a
Name=Slt William Hérisson
Nation=FRANCE
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24 skins mID Nieuport N24 First Eagles 2of Escadrille 3 for E
__________________________________________________________________________________________________________
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 3.
- A full squadron (Escadrille 3) with 100 decal serial numbers. 
- 2 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file and add this line:
[AircraftData]
HangarScreen=ESC 3 HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 3 HANGARSCREEN 02.jpg      <------ add this line to use the second option.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 3
Name=Escadrille 3
Nation=FRANCE
Squadron=3ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24bis skins of Escadrille 87 for EmID N24bis First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing Nieuports 24bis used by Escadrille 87 "Les Chats Noir".
Some serial numbers are historicals, others are not.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_escadrilles_1_a_500.htm
__________________________________________________________________________________________________________
** What you will find in this Nieuport N24bis skin Pack:
- A full set of skins & decals to Nieuport N24bis used by Escadrille 87.
- A full squadron (Escadrille 87) with 100 decal serial numbers and squadron markings. 
- 3 New optional hangar screens for Nieuport 24bis (N24bis) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24bis aircraft main folder, next, edit your N24bis.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 02.jpg      <------ add this line to use the second option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24bis" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24bis" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24bis".ini file.
[TextureSetXXX]
Directory=ESC 87 (Silver Dope)
Name=Escadrille 87
Nation=FRANCE
Squadron=87ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24bis.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24bis and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24bis model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of Escadrille 87 for EmID N27_FAS First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 27 used by Escadrille 87 "Les Chats Noir".
Some serial numbers are historicals, others are not.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_escadrilles_1_a_500.htm
__________________________________________________________________________________________________________
** What you will find in this Nieuport N27_FAS skin Pack:
- A full set of skins & decals to Nieuport N27_FAS used by Escadrille 87.
- A full squadron (Escadrille 87) with 100 decal serial numbers including the Nieport 27 flown by William Wellman and other by René d'Estainville. 
- 3 New optional hangar screens for Nieuport 27 (N27_FAS) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=ESC 87
Name=Escadrille 87 (Camo)
Nation=FRANCE
Squadron=87ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 87 (Silver Dope)
Name=ESC 87 (Silver Dope)
Nation=FRANCE
Squadron=87ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 27 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Nieuport 24 skins of Escadrille 87 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 87 "Les Chats Noir".
- Two types of paint patterns for the Nieuports used by Escadrille 87, one in silver-dope and other in french pattern camouflage. This enables a mix of different types when you fly single missions.
- A full squadron (Escadrille 87) with 100 decal serial numbers. 
- 3 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website:http://albindenis.free.fr/Site_escadrille/page_escadrilles_1_a_500.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 87 (Silver Dope)
Name=Escadrille 87 (Silver Dope)
Nation=FRANCE
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Squadron=87ESC
[TextureSetXXX]
Directory=ESC 87
Name=Escadrille 87
Nation=FRANCE
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Squadron=87ESC
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of Escadrille 561 for EmID N27_FAS First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 27 used by Escadrille 561 on Venice, Italy from 1917 to 1918.
To be used with the campaign "Armchair Aces Over Italy" by Ojcar. 
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
Many serial numbers are historicals, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII. 
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________
** What you will find in this Nieuport N27_FAS skin Pack:
- A full set of skins & decals to Nieuport N27_FAS used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 6 New optional hangar screens for Nieuport 27 (N27_FAS) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 04.jpg      <------ add this line to use the fourth option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 05.jpg      <------ add this line to use the fifth option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 06.jpg      <------ add this line to use the sixth option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=ESC 561
Name=ESCadrille 561
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561b
Name=ESC 561 (Silver dope)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561c
Name=ESC 561 (Light camo)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 27 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Nieuport 24 skins of Escadrille 561 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 24 used by Escadrille 561 on Venice, Italy from 1917 to 1918.
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
You will also find two types of paint patterns for the Nieuports used by Escadrille 561, one in silver-dope and other in french pattern camouflage. This enables a mix of different types when you fly single missions.
Many serial numbers are historical, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________ 
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 3 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 561
Name=Escadrille 561 (Silver Dope)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561a
Name=Escadrille 561 (Camo)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________