The Trooper

M151 MUTT with TOW Missile launcher
---------------------------
M151 Model by Jarek Hereda (yakarov79). Skins by me.

Installation:
---------------------------
Extract to your GroundObject folder.

---------------------------
Released under CombatAce Fair-Use terms.

The Trooper

M151 Multi-Utility Tactical Truck (MUTT)
---------------------------
M151 Model by Jarek Hereda (yakarov79). Skins by me.

Installation:
---------------------------
Extract to your GroundObject folder.

---------------------------
Released under CombatAce Fair-Use terms.

The Trooper

Willys MB Jeep
---------------------------
Willys MB Jeep, based on the stock M38 model.

Installation:
---------------------------
Extract to your GroundObject folder.

---------------------------
Released under CombatAce Fair-Use terms.

The Trooper

M38 Jeep skins
---------------------------
512x512 skins for the stock M38 Jeep.

Installation:
---------------------------
Extract to your GroundObject folder.

---------------------------
Released under CombatAce Fair-Use terms.

The Trooper

Soviet/Russian Pilots Pack - part 2 (80's to present)
-------------------------------------------------
 
These are re-skins of the stock pilot model, representing Soviet/Russian pilots wearing the latest generation Soviet/Rusian flightgear.
 

Pilot descriptions:
-------------------------------------------------
 
Red7250 and Red7350
 
These pilots are wearing current standard Russian helmet - ZSh-7, KM-34 series 2 oxygen mask and VKK-15 high altitude suit. Developed in late 1980s, these suits are the latest generation of mass produced Soviet/Russian high altitude suits
 
Use on:
Almost all contemporary Russian aircraft that fly on higer altitudes: MiG-25, MiG-29, MiG-31, Su-27, Tu-160, late Tu-95.
 
Red5260, Red7260 and Red7360
 
These guys are wearing VMSK-4 naval survival suit. It is a complete pilot protection system as it contains a number of partial pressure (G-suit) components and it also acts as a dry-suit in case the pilot ejects into the cold waters of the North or Barents Seas. Great for North Atlantic or DBS terrains.
Red5260 is more suitable for older aircraft like Yak-38.
 
Use on:
Soviet/Russian naval aviation aircraft, aircraft flying over cold waters
Yak-38, Yak-41, Su-33, MiG-29K, Tu-22M etc...
 
Red5225, Red7225 and Red7325
 
Regular flight suits in camo pattern and anti-G pants. Used in various aircraft since the late 80s.
 
Use on:
Pretty much everything that flies since the 80s. I am using these in ground attackers.
 

Instalation:
-------------------------------------------------
1. Extract to your "Objects\Pilots\" folder.
 
2. Open the *_data.ini file for your aircraft of choice and search for a section like this:
 
[Pilot]
SystemType=PILOT_COCKPIT
...
 
Change the line
 
PilotModelName=...
 
to
 
PilotModelName=RedXXXX
 
If the it does not have the line above, just add it.
Save!
 
3. Start the game and enjoy your new pilots!
 
-------------------------------------------------
 
Released under CombatAce Fair-Use terms:
http://forum.combatace.com/index.php?showtopic=26131
 
In short:
Feel free to redistribute it, mod it, include it in your mods, and do with it whatever you want, as long as it is not included in any payware!
 

The Trooper
 
15 Sep 2016

Some skins for the stock T-72A.
 
Camo
Snow
Tan
Finland Camo
 

Installation:
---------------------------
Extract to your GroundObject folder.
 

---------------------------
 
Released under CombatAce Fair-Use terms:
http://forum.combatace.com/index.php?showtopic=26131
 

The Trooper
 
14 Mar 2016

Su-25 cockpit repaint v.1.0
---------------------------
 
A repaint for Florian's Su-25 cockpit.
 
Credits:
---------------------------
 
Florian - cockpit model
 

Installation:
---------------------------
Extract it in your Su-25 folder and overwrite when prompted.
 
---------------------------
 
Released under CombatAce Fair-Use terms:
http://forum.combatace.com/index.php?showtopic=26131
 

The Trooper
 
07 Feb 2016

Soviet/Russian Pilots Pack - part 1 (60's - 80's)
-------------------------------------------------
 
These are re-skins of the stock pilot model, representing Soviet/Russian pilots in a typical flightgear from the 60's till the 80's.
 
 
Pilot descriptions:
-------------------------------------------------
 
Red3201 - Red3211
 
These pilots are wearing ZSh-3 helmet and KM-32 oxygen mask. Developed in the early 1960's, this is probably the most widely used flight helmet in the world. Many of these are in use even today.
 
Aircraft to use on:
Virtually every type of Soviet-made aircraft. Best to use on: late MiG-17 ahd 19, MiG-21, early MiG-23, Mi-24, Su-7, early Su-17 etc.
 
---
 
Red5201 - Red5211
 
These pilots are wearing ZSh-5 helmet and KM-34 oxygen mask. The ZSh-5 helmet was standard Soviet issue for its pilots in the 1970's. These helmets could be found throughout the entire eastern bloc and huge numbers have been manufactured until the late 80's.
 
Aircraft to use on:
late MiG-21, MiG-23, MiG-27, early MiG-29, Mi-24, Su-17, Su-24, early Su-27, etc.
 
---
 
Red7001 - Red7111
 
These pilots are wearing current standard Russian helmet - ZSh-7 and the older KM-34 series I oxygen mask. This setup was typical from the late 80's and quite often seen today.
 
Aircraft to use on:
late MiG-23, MiG-29, MiG-27, MiG-31, Mi-24, late Su-17, Su-24, Su-27 etc.
 
 
Instalation:
-------------------------------------------------
1. Extract to temporary location.
 
2. Copy the following files (where "XXXX" represents the desired pilot number) into your "Objects\Aircraft\" folder.
 
RedXXXX.ini
RedXXXX.lod
RedXXXX_lod002.lod
 
3. Open the *_data.ini file for your aircraft of choice and search for a section like this:
 
[Pilot]
SystemType=PILOT_COCKPIT
...
 
Change the line
 
PilotModelName=...
 
to
 
PilotModelName=RedXXXX
 
If the it does not have the line above, just add it.
Save!
 
4. Start the game and enjoy your new pilots!
 
-------------------------------------------------
 
Released under CombatAce Fair-Use terms:
http://forum.combatace.com/index.php?showtopic=26131
 
In short:
Feel free to redistribute it, mod it, include it in your mods, and do with it whatever you want, as long as it is not included in any payware!
 
 
The Trooper
 
08 Feb 2009

Tornado IDS cockpit repaint v.1.0
---------------------------
 
This is a repaint of AmokFloo's Tornado pit. I've recalibrated or moved some of the instruments, so make sure you are using the Tornado_IDS_COCKPIT.INI file included in this pack. I don't pretend for 100% accuracy due to a lack of good reference materials and engine limitations. Radar Ground Map mode works only in WOI and there is no Terrain Avoidance Mode so I hope TK will fix that in the upcomming patches.
 
Credits:
---------------------------
 
Original cockpit model by AmokFloo
 
RWR Symbology by fractalnoise
 
 
Installation:
---------------------------
Extract it in your tornado folder overwriting all files. In your main tornado_*.ini file change the following lines:
 
CockpitDataFile=Tornado_*_cockpit.ini
AvionicsDLL=Avionics60.dll
AvionicsDataFilename=Tornado_*_avionics.ini
 
to:
 
CockpitDataFile=Tornado_IDS_cockpit.ini
AvionicsDLL=Avionics70.dll
AvionicsDataFilename=Tornado_IDS_avionics.ini
 
There is no .lod file included, so you still need the original model!
 
---------------------------
 
Released under CombatAce Fair-Use terms:
http://forum.combatace.com/index.php?showtopic=26131
 
 
The Trooper
 
13 Sep 2008

F-14A Cockpit Upgrade v.1.0
---------------------------
 
This is a repaint of Mirage Factory's F-14 cockpit, I've made in attempt to give it more reallistic appearance. I've also rearranged some of the lights on the ACM panel, using .ini moves.
 
 
Credits:
---------------------------
 
Original cockpit model by The Mirage Factory
 
Avionics by Crusader modified by JSF_Aggie
 
Thanks to Caesar for beta testing and helping me with some info on
 
the real Tomcat pit.
 
 
Let me know, if I've missed someone...
 
 
Installation:
---------------------------
Extract it in your F-14A folder overwriting all files. In your F-14A.ini change the following line: "AvionicsDLL=Avionics60.dll" to "AvionicsDLL=Avionics70.dll". There is no .lod file included, so you still need the original model!
 
 
The Trooper
 
28 Feb 2008
 
edit: updated installation instructions in the readme file