Jump to content

Recommended Posts

Posted

File Name: Eurocopter Tiger ARH

File Submitter: capun

File Submitted: 28 Aug 2006

File Updated: 29 Aug 2006

File Category: Helicopters

 

The SFP1 Dev A-Team (capun, Gramps, Charles, Kesselbrut, The Wrench & Wehner) proudly presents the EuroCopter Tiger ARH

 

Model work and FM by capun, Textures by Gramps, testing by Charles, Screens by The Wrench, Virtual Cockpit by Kesselbrut

 

Many thanks to all devs who contributed to this project. Please read the Installation instructions file for a complete list of contributors.

 

Original Model design by Rory Kelly, downloaded from Hovercraft.com

 

The helo FM needs to be tweaked a bit, Use the joystick gently, Thrust Vectoring is enable.

 

8/28/08 22:38 PDT

Minor update to fix a missing sound file. Check the EC_Tiger_Data.ini for this

 

[sound]

EngineSoundName=Heli

 

8/29/06 Update

Data ini replaced to fix running out of fuel.

 

8/30/06 Update added on-board Laser Designator.

 

 

Click here to download this file

Posted

There seems to be a problem with the engines stopping if you fly at full power, until I find the problem do not run at full power after take off, the helo will fly at full speed with throttle at about 25%

Posted

Update posted, the problem was that the Tiger was running out of fuel.

 

If you are interested, the Tiger has 1080 Kg of fuel, the TurboMecca MTR390 hace a TSFC of 274 g/kW-Hr and producing 873 kW of power.

 

The expected endurance should be around 2+ hours. But for some reason the TSFCM1=0.274 is not working or the number is wrong. So I am using TSFCM1=0.0274

 

If you don't want to download the whole package you can change the TSFCM0 and TSFCM1 for engine1 and engine2 like this (be sure that you do not have duplicates.

 

[Engine1]

ReferenceName=Rolls-Royce/Turbomeca/MTU MTR390 1170 SHP/873 kW

.

.

TSFCM0=0.0174

TSFCM1=0.0274

MinFuelFlow=0.01

 

 

[Engine2]

ReferenceName=Rolls-Royce/Turbomeca/MTU MTR390 1170 SHP/873 kW

.

.

TSFCM0=0.0174

TSFCM1=0.0274

MinFuelFlow=0.01

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..