kukulino 1 Posted October 15, 2008 (edited) Zdar chlapi :yes: Som odštartoval nový projektík. Alebo skôr adaptáciu Už dávnejšie mi v žalúdku ležal stock Mig-19S. Urobiť ho flyable nie je problém. Ale ukočírovať ho... To je iné kafe... Flight model Migu-19S vôbec nezodpovedal obratnej mašine s dobrou stúpavosťou... Kto skúsil, vie o čom hovorím. Už teraz môžem povedať, že nový letový model je hotový. Spravil ho starfighter2 a vôbec nepochybujem že sa bude páčiť Základný skin mám takmer hotový. Možno pribudne aj jedan či dva ďalšie. Špecifická výzbroj dvomi ORO-57K raketnica umiestnenými za podvozkovými šachtami na krídle je tiež plánovaná. Pôvodné pylóny na nábežnej hrane krídla naše mašiny nepoužívali (už sú "vymazané" aj z S-105 modelu ) Podobne plánujem aj dve verzie S-105. Sú odlišné rozdielnou dĺžkou kýlovej plochy na chvoste a tiež by bolo dobré vymodelovať imitáciu zameriavača pre externý model (stock verzia -- podľa môjho skúmania a z neho plynúceho názoru -- reprezentuje skoršiu verziu s kratšou kýlovkou). Tieto vecy sa však musia prediskutovať s 76.IAP-Blackbirdom, ktorý je momentálne na dovolenke po ťažkom skúškovom období. Kokpit by bol upravený Mig-19S pit z download section. Dúfam že sa to podarí a čoskoro si budeme môcť streliť z troch NR-30 na nejaký dôstojný cieľ a budeme vedieť, že nestrieľami z podhodnotenej mašiny Takto zatiaľ vypadá zameriavač: V akcii... A S-105: Edited October 15, 2008 by kukulino Share this post Link to post Share on other sites
Vigilant 1 Posted October 15, 2008 Uzasny. MiG-19S fakt muzu. Skvela prace. Moc se tesim. Ted se nejak objevuje spousta super letadel. A to jeste nejsou Vanoce :-) Jo a kde si sehnal ten obrazek? Je fakt peknej :-) Share this post Link to post Share on other sites
kukulino 1 Posted October 15, 2008 (edited) Zdar :yes: Mig-19 aj ja dosť môžem A to je ešte ako WIP aj P alebo PM verzia (neviem presne), ale má nižšiu prioritu na "to do" liste jej autora. Takže v dohľadnej dobe ho asi neuvidíme. Ale pevne verím že S-105 bude čoskoro. A ten obrázok je scan z Lock On No 21 (Aircraft photo file 799. Mikoyan Mig-21MF Fishbed). Je to taký zošit s fotografickým materiálom detailov maďarskej Mig-21MF. Znaky sú dorobené, pravda :yes: Edited October 15, 2008 by kukulino Share this post Link to post Share on other sites
kukulino 1 Posted October 17, 2008 (edited) Taký maličkú update Niektoré S-105 mali na nose malý emblém s hviezdou, listami a nápisom "V SOCIALISTICKÉ PÉČI" Síce to nie je na skine čitateľné (samotný znak bol veľmi malý), ale je to tam :yes: Aspoň budeme vedieť o čo ide EDIT: a rozmýšľam, že druhý skin by bol bez farebných doplnkov na chvoste a výškovkách. Panely vedľa kanónov na trupe možno budú tmavšie. Edited October 17, 2008 by kukulino Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 19, 2008 I have still your MiG-21R on my HDD will work on it today maybe finished this evening or later this week. What do oyu mean by fin fillet? And the box? If you have some pics for reference I don`t think it`s so hard to create this stuff. The gunsight box is really needed. I think will do it. Share this post Link to post Share on other sites
kukulino 1 Posted October 19, 2008 (edited) Wellcome back OK. Thanks for interest. You will see what you can do :yes: About box ---- see first picture in my previous post. No gunsight model in the pit. So just simple gunsight box model, maybe with some glass as "HUD/gunsight" is needed. Edited October 19, 2008 by kukulino Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 25, 2008 So here is the first result of my modding, hope it`s the stuff you are looking for ;-) Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 Simply: PERFECT!!!!! Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 thanks mate, so lets coordinate what nex, what kind of detail do you want?! Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 Not necessary have Hi-detail model, becouse S-105 is just stock Mig-19S adaptation So nice gunsight and different tail section is needed to get wanted S-105 look. Most different from stock Mig-19S is flight model Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 I will redo the gunsight, have now the righ position for it and will do the hump! Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 Ok gunsight done for now working on the hump what do you think? Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 New gunsight new antennas under the fuselage, under the left wing, on the top of the tailfin humps on the tailfin and on the fin under the belly can see on the pic below Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 DAMN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Looking ABSOLUTELY AMAZING :fans: Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 (edited) Nice you like it, will map it, you will be able to change the colour not really the texture will map it as mass. 3 colours for the pit, 1 colour for the antenas and one for the tail antena wich is now red cause of the skin. hope this is the stuff you`ve wanted! Edited October 27, 2008 by 76.IAP-Blackbird Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 Sent you last update in PM. Sometimes it is hard comunicate with me and my english, I know Now we have first production version finished with your stuff. Second version is diffirend just in longer tail part. I feel very good mod in the air :ph34r: Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 Haven`t ICQ installed yet will see what I can do about this fin I think it`s possible. Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 (edited) Rgr that :yes: It is not hard make it I hope. If you will have time for it and you will make it, it is the last part for external model. Skins are finished, ORO pod with basic rocket model is finished, FM finished. Than it will be possible make pack with both bit different versions whose served in our AF. I am sorry again for my english. Project looks very good in this WIP phase. Looky forward to final version Edited October 26, 2008 by kukulino Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 Tell me what do you see Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 I see veery nice Migs Seriously: I see both S-105 variants. Closer plane is earlier plane with shorter "finn fillet" and second plane is with later longer "finn fillet". This is exactly what is needed for Czechoslovak S-105 (and in general for Mig-19S) look :good: :good: Thank you :cray: Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 26, 2008 Good!!! But i need to work a bit on the late fin. I also created this plane for this fin, now we have S-105 early with humps S-105 late with fin will pack both and send them to you when I finish the UV mapping stuff maybe in the next days! Share this post Link to post Share on other sites
kukulino 1 Posted October 26, 2008 (edited) Rgr that! And looky forward to your stuff I have low info about OARS-57 rocket for ORO rocket pod, so for this time no new version is planned. ORO-57K firing S-5 for test: Edited October 26, 2008 by kukulino Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted October 27, 2008 (edited) Jo hey Ravenclaw is redoing the S-5 rockets.. so .... ;-) Damn If I had the OUT file I would redo the small intakes for you... Edited October 27, 2008 by 76.IAP-Blackbird Share this post Link to post Share on other sites
kukulino 1 Posted October 27, 2008 (edited) Ouuuha. Good news. Will be cool have multiple warheads for UB-16/32, ORO-57K rocket pods Mmm, well, no easy way get OUT file from install. Not included in any CAT file I think. Is it possible use LOD and Hex editor for finding needed parts? Mmm, or ask TK for OUT... Edited October 27, 2008 by kukulino Share this post Link to post Share on other sites