Zvezda K-36D Ejector Seat

[+AleDucat 188]

View File

Zvezda K-36D Ejector Seat

---

Next in my Seat Series, I proudly introduce you Zvezda K-36D.

Intended to use with Soviet/Russian stock pilots with The Trooper repaints.

 

 

Enjoy it!

 

 

 

El siguiente en mi serie de asientos, con orgullo les presento al Zvezda K-36D.

Pensado para ser usado con pilotos Soviéticos/Rusos con el repaint de The Trooper.

 

 

Disfrútenlo!

---

• Submitter
  AleDucat
• Submitted
  02/25/2009
• Category
  Pilot Mods

 

[Silverbolt 104]

Master piece again, ale!

[SUICIDAL 401]

Those with all batteries ALEJANDRO.

We are giving away these beautiful models my friend.

Hope for tomorrow using the PAMPA

 

Marcos

[+X RAY 83]

A Masterpiece! :yes:

[+X RAY 83]

Tried on the mig-29,seat again is great,but the pilot head seems more inside on the pit,I've found the problem,is it possible lower the headrest a bit?This is generated by the same poistion of both pilot and seat,If i try to rise the pilot,harnesses comes inside him,so other way is modifying it,pilot use for purpose is one of the Trooper's ones,aniway is only a suggestion,nothing to critic your great work!

[+76.IAP-Blackbird 3,557]

damn thats a nice work!

[+AleDucat 188]

I've tested this seat with Trooper's pilots in a couple of MiG-29s, and I've found that pilot's position in this plane(s) must be a little bit forward.

 

 

I don't know which '29 you are using, but I think the correct position must be as follow:

 

[Pilot]
SystemType=PILOT_COCKPIT
PilotModelName=Red7011.LOD
Position=0.0,4.6,1.25
SeatModelName=K-36D
SeatPosition=0.0,4.6,1.25
MinExtentPosition=-0.25, 5.91,-0.20
MaxExtentPosition= 0.25, 6.99, 0.92
CanopyNodeName=Canopy
HasArmor=TRUE
ArmorMaterial=STEEL
Armor[TOP].Thickness=3
Armor[FRONT].Thickness=12
Armor[RIGHT].Thickness=12
Armor[LEFT].Thickness=12
Armor[REAR].Thickness=50
Armor[BOTTOM].Thickness=12

 

Note Position=0.0,4.6,1.25 and SeatPosition=0.0,4.6,1.25.

 

The same values also works for any '29*. In example, look at the cockpit from above with "standar" values (0.0000,4.339,1.27) and you'll see that the pilot can't reach the panel, moreover if you make a comparison with any picture, you'll realise that the real pilot is well forward, and ingame one is too backward...

 

 

Don't know if this is what you were talking about...

[+X RAY 83]

More realistic,but set height to 1.215,now all the headrest stays below canopy,at 1,25 if you look at headrest back yo notice that some parts remains out of cockpit a bit!

Thanks for replying!