zmatt Posted May 1, 2009 Posted May 1, 2009 Several of the aircraft that I routinely fly have their flaps set to deploy automatically at a given airspeed. That's pretty nifty, but in a long turning fight sometimes my airspeed drops below that level and the deploying flaps messes me up. How do you change the flaps to make them deploy on a key command? [LeftFlap] SystemType=HIGHLIFT_DEVICE CLiftdc=0.20 CDdc=0.035 Cmdc=-0.005 DeltaStallAlpha=-2.00 AreaRatio=1.00 DeploymentMethod=AUTOMATIC_AERODYNAMIC_LOAD Setting[1].Angle=8.0 Setting[1].DeployValue=144.0 Setting[1].RetractValue=154.3 Setting[2].Angle=20.0 Setting[2].DeployValue=97.74 Setting[2].RetractValue=108.76 MaxDeflection=20.0 MinDeflection=0.0 ControlRate=1.0 ModelNodeName=LeftFlap ReverseModelOrientation=TRUE Here is the pertinent data.ini information to one of two flaps. I understand what the delpoy value does, but the numbers don't make much sense to me. Can someone show me how to make it deploy on a key press? Quote
+FastCargo Posted May 1, 2009 Posted May 1, 2009 DeploymentMethod=MANUAL Comment out the Setting[x].RetractValue lines. Done. FC Quote
zmatt Posted May 1, 2009 Author Posted May 1, 2009 Awesome, thanks. Does it automatically assign the function to the F key? Quote
+sony tuckson Posted May 1, 2009 Posted May 1, 2009 yes, if you didn't change default values, F to lower, V to raise Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.