F-4C_8thTFW_1967

[mppd 16]

View File

F-4C_8thTFW_1967

---

F-4C 1967 – 8thTFW Ubon - By Crab_02 and Mike Druzolowski

 

80 F-4C serial numbers which actually operated with the three squadrons of the 8th TFW at Ubon during 1967.

 

Historical bit: The three squadrons of the 8th TFW at Ubon RTAFB adopted tailcodes on their F-4C Phantom II aircraft from at least July 1966. By early 1967 the F-4Cs within the theater had been modified with the addition of AN/APR-25 RHAW gear visible as a housing on the vertical stab above the rudder, and had received the new Air Force MAU-12 intermediate (inner) wing pylons. Some serial numbers are repeated for the different squadrons as many transfers between squadrons occurred during the year – so be careful that you don’t fly the same airplane numbers at the same time if interested in being historical. Some aircraft were seen carrying all olive drab 370 gal wing tanks, so those are presented here. Also a camouflaged centerline 600 gal tank sometimes seen is here too. Almost all airplanes seem to have had the original 6-inch serial number on the vertical fin painted out with olive drab paint. Mig kill markings were carried over from previous units (the 497th eventually ending up with most of them). Some 497th TFS planes seem to have had red nosewheel door numbers, but photos show that most other squadrons had none.

I made this package for the post-October 08 patched version for Wings over Vietnam (which is what I'm flying). Textures are again 1024 pixel resolution to help frame rates on modest systems (like mine) - so view the external views at arm's length, not extremely close-up please. Versions for SF2 with higher resolution textures are sure to follow.

 

Description: The airplane depicted is the Air Force F-4C as it appeared in early 1967 or later in Southeast Asia – Air Force MAU-12 pylons, tail fin tip radar homing and warning antennas and several other small antennas added, three tone camouflage and tailcodes.

New features include:

- New vertical stab and rudder shapes

- New nose radome and IR sensor housing shapes

- New detailed pylons and Sidewinder rails

- New 3D model cockpit (mostly invisible though...)

- New nose wheel doors

- Animated air refueling door (Sift + 8)

- Opening canopies of course (Shift + 3)

- New horizontal stab bases

- Camouflaged Fletcher wing tanks (with pylons that correctly jettison along with the tank) plus new centerline 600 gal tank with retained pylon

- Numerous small detail changes

 

Note that all textures for the stock Thirdwire F-4s can be made to fit with minor alterations - watch leading edge flap, vertical stab/rudder and intake splitter plate locations mostly.

 

Issues: I used many parts that I already had built, so separate bmps are included for the pylons, nose and rails - these should have been combined into one I guess.

 

My sincere thanks (in addition to Crab and TK) go to Sundowner - who originally shared his F-4 texture templates with me and what I started with originally, and also to drdoyo for his 1024 templates which helped, Ravenclaw_007 for the kind permission to include his super Martin Baker ejection seat in this package, and to Old Diego for kind permission to include his superb pilots. Also my thanks to Mike france and Alan Howarth who know more about F-4s than I ever will!

 

Please contact me for any problems or issues - we'll do our best to correct them and make this even more authentic for what's to come. PM me at Combatace or E-mail at mppd@att.net please.

---

• Submitter
  mppd
• Submitted
  08/25/2009
• Category
  F-4 Phantom II

 

[Vader2 1]

Thank,s!

[+ST0RM 145]

Nice work Mike. Always great to add your realistic tweaks.

 

Thanks!

 

-Jeff