+Wrench Posted February 9, 2016 Posted February 9, 2016 View File SF2:E F-86F-40 Sabre, USAFE Skin Pak SF2:E F-86F-40 Sabre, USAFE Skin Pak 2/7/16 -- For SF-2, FULL-5 merged, Reccomended -- This mod is to be applied to the "F-86F-40 Remod Pak", available at the following url: http://combatace.com/files/file/13788-sf2-f-86f-40-sabre-remod-pak/ It is also advised, if/when installing both the original Remod Pak and these skins in SF2:E you =MUST= remove any/all other skins for non-European based users (such as JASDF, IIAF, EtAF). This will preclude any "oddites" that you might see over The Continent. See "Notes" below for more information on the included data and loadout inis.In other words, this is a European-centric skin/decals/ini package only!! In this package are skins for Sabres from the 50th FWB, USAFE, in the mid-1950s ... 10th FBS81st FBS417th FBS also a remoded/corrected version of the... 461st FDS, 36th FDW (corrected FDW) skin/decal ini with 'fixed' tail skin, and corrected Wing affiliation in the texture set ini. Also, a "Level 1 decal" has been added, activating the Squadron Displayed Name on the Loadout Screen. When installing, just allow the overwrite for this skin. I've been unable to run down exactly WHICH F-86F version was used by these squadron, so simply chose to use the F-40, given the time frame they operated them (1953-58-ish).As all the Sabres are mapped the same, can be used for any of the F-86F variants. However, if NOT using this on the -40 model, do =NOT= use the included data ini!! (but you can copy the changes, which are the 1950s pilot figure and 'steerable nose gear' callouts) Almost all markings are decals, with the exceptions of the nose color bands for the 50th FBW birds. Tail bands are decals, at Level=1, and will activate the Squadron Displayed Name on the Loadout Screen (these are stock units,listed in the game's SquadronList.ini). All skins use a "pool" of serial Serial and buzz numbers; while these should be considered 'generic' in nature, are for the variant depicted. Decal randomization is TRUE. All skins are in jpg format. As well as a slightly tweeked data ini, a new "USAFE only" style loadout ini is included. . REMINDER -- this loadout ini is =ONLY= for use by American Sabres (this version) as used in the SF2:E mods folder!!! Don't use it anywhere else! As always, fairly easy to follow, yet detailed install instructions are included. So, please read them! Also, as this mod pack is specificly designed for an SF2:E (Europe) install, PLEASE read the "Notes" section for important information on the 2 inis included!It is HIGHLY ADVISED you read this document through, after unzipping, but BEFORE installing to you game.Just so we're clear on everything, this is for use in Europe (SF2:E) ONLY!!! Happy Landings!WrenchKevin Stein Update 2/9/2016: Replaced "1.jpg" on all skins, removed anti-glare panel. Submitter Wrench Submitted 02/09/2016 Category F-86 Quote
+Wrench Posted February 9, 2016 Author Posted February 9, 2016 I forgot the mention in the readme, that now with the corrected Hit Boxes, the aircraft may be more vulnerable to enemy fire. as some point, I'll be updating the KAW Sabre Pack, and any others, with the new settings. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.