SPAD XIII C1. "Diamond Dick" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant William H. Palmer of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. William W. Palmer achieved 3 victories in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
During the Spring of 1919, "Diamond Dick" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Diamond Dick" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Diamond Dick" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Diamond Dick
Name=Diamond Dick
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding one optional (SPAD13_001.bmp) with a red star painted on the wheels.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

SPAD XIII C1. "Lightning Bolt" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Harvey Weir Cook of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919.
Lieutenant Harvey Weir Cook achived 7 confirmed victories in WW1, flying with 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
During the Spring of 1919, "Lightning Bolt" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Lightning Bolt" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Lightning Bolt" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Lightning Bolt
Name=Lightning Bolt
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000 
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

SPAD XIII C1. "Easter Egg" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Samuel Kaye of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919.
Lieutenant Samuel Kaye achieved 4 victories in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
During the Spring of 1919, "Easter Egg" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Easter Egg" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Easter Egg" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Easter Egg
Name=Easter Egg
Nation=USAS
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

SPAD XIII C1. "Sumbeam" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant John Jeffers of 94th Aero Squadron. Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. John Jeffers achieved 2 victories in WW1, flying with 94th Aero Squadron. 
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Sumbeam" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Sumbeam" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Sumbeam" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Sunbeam
Name=Sunbeam
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 
 

 

Skin for excellent oefD3_ba253 by Jan Tuma.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Add to oefD3_ba253.ini :
[TextureSetXXX]
Name=GreenPhR
Nation=AUSTRIA
Squadron=
Specular=0.400000
Glossiness=0.400000
Reflection=0.400000
Eugene

Skinpack for excellent Snipe by 101tfs.
There are two skins with different wing colors - PC10 and PC12 and with different fulelage's bottom - canvas color and PC10 color.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Also for correct the work of Snipe's sight you can replace :
- for "Snipe_COCKPIT":
[CockpitData]
Directory=cockpit
[GunsightFront]
HasGunsight=TRUE
//GunsightMilSize=50
//GunsightName=SPAD13_ironsight.tga
//FixedSight=TRUE
GunsightMilSize=30
GunsightName=Fokker_ironsight.tga
FixedSight=FALSE
[CockpitSeat001]
ModelName=Camel_Pit-R2.LOD
HideExternalNodeName=cockpit
OpenCockpit=TRUE
ExternalClipDistMin=0.04
//Position=0.00,-0.1883,0.8394
Position=0.00,-0.1883,0.8154
Offset=0.0,-0.5,0.7
//ViewAngles=0.0,3.0,0.0
ViewAngles=0.0,0.5,0.0
- and for "Snipe_DATA":
// Internal Guns ---------------------------------------------------------
[LeftMachineGun]
SystemType=FIXED_GUN
GunTypeName=303CAL_VICKERS_MK1
InputName=FIRE_PRIMARY_GUN
GunFireAnimationID=4
GunGroup=1
MuzzlePosition=-0.155,1.275,0.667
//AimAngles=0.0,-3.0,0.0
AimAngles=0.0,1.0,0.0
MaxAmmo=380
EjectShells=TRUE
EjectPosition=-0.35,0.37,0.5
EjectVelocity=-1.5,-0.25,-0.5
[RightMachineGun]
SystemType=FIXED_GUN
GunTypeName=303CAL_VICKERS_MK1
InputName=FIRE_PRIMARY_GUN
GunFireAnimationID=4
GunGroup=1
MuzzlePosition=0.155,1.275,0.667
//AimAngles=0.0,-3.0,0.0
AimAngles=0.0,1.0,0.0
MaxAmmo=380
EjectShells=TRUE
EjectPosition=0.35,0.37,0.5
EjectVelocity=1.5,-0.25,-0.5
Eugene1

Skinpack for excellent Rumpler C1 and Rumpler CIV aircraft by Stephen1918.
"CanvasPhR" and "GreyPhR" are for Rumpler C1."3ColorPhR" and "LozengePhR" are for Rumpler CIV.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.

Eugene1

New skin pack for excellent Caudron G4 by Stephen1918.
Skinpack included two skins with french and russian paint schemes.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Eugene1