mejay855 Posted November 17, 2007 Posted November 17, 2007 How do you correct the gear down handling chacteristics of A6 intruder.
Czech6 Posted November 17, 2007 Posted November 17, 2007 Here's a fix from my archieved documents: nooby Junior Member Member # 29460 hey atr-driver, thanks to combatace.com, i found a post about our issue in the forum there and i have fixed it for my own. here is my fix: http://mwlue.no-ip.com/A-6A_DATA.INI put the ini file in to the Objects\Aircraft\A-6A, then happy flying. if you don't like it, just remove it or move it to some where else and the default will be loaded. according to the post at combatace, there are some parameters in the INI that increase the sensitivity of control surface when gear is lowered. i found those value and simply disable it. here they are: [LeftStabilizer] SystemType=CONTROL_SURFACE InputName=PITCH_CONTROL MovingSurface=TRUE MaxDeflection=6.3 MinDeflection=-9.5 HasGearDownSetting=FALSE <=== GearDownMaxDeflection=15.0 GearDownMinDeflection=-24.0 MaxControlSpeed=249.84 ControlRate=1.0 ModelNodeName=elevator_left ReverseModelOrientation=TRUE [RightStabilizer] SystemType=CONTROL_SURFACE InputName=PITCH_CONTROL MovingSurface=TRUE MaxDeflection=6.3 MinDeflection=-9.5 HasGearDownSetting=FALSE <=== GearDownMaxDeflection=15.0 GearDownMinDeflection=-24.0 MaxControlSpeed=249.84 ControlRate=1.0 ModelNodeName=elevator_right ReverseModelOrientation=TRUE [Rudder] SystemType=CONTROL_SURFACE InputName=YAW_CONTROL ReverseInput=TRUE MaxDeflection=4.0 MinDeflection=-4.0 HasGearDownSetting=FALSE <=== GearDownMaxDeflection=35.0 GearDownMinDeflection=-35.0 CDdc=0.0096 Cydc=0.1214 Cldc=0.0086 Cndc=-0.0121 CldcAlphaTableNumData=15 CldcAlphaTableDeltaX=4.00 CldcAlphaTableStartX=-28.00 CldcAlphaTableData=1.430,1.253,1.070,0.882,0.690,0.494,1.274,0.090,1.000,1.023,-0.214,-0.397,-0.633,-0.921,-1.256 CndcAlphaTableNumData=15 CndcAlphaTableDeltaX=4.00 CndcAlphaTableStartX=-28.00 CndcAlphaTableData=0.434,0.450,0.464,0.476,0.867,0.986,0.995,1.000,1.000,0.995,0.879,0.485,0.476,0.464,0.449 ControlRate=5.0 MaxControlSpeed=128 ModelNodeName=vertical_rudder_partA RotationAxis=Y-AXIS
Czech6 Posted November 18, 2007 Posted November 18, 2007 On further review, that fix many not be valid. It appears to be old as my current A-6 data.ini does not have those lines with gear down settings. Either it was fixed in the last patch or I have someone's FM fix that changed it.
mejay855 Posted December 18, 2007 Author Posted December 18, 2007 Here's a fix from my archieved documents: nooby Junior Member Member # 29460 THIS WORKED GREAT!THANX!! hey atr-driver, thanks to combatace.com, i found a post about our issue in the forum there and i have fixed it for my own. here is my fix: http://mwlue.no-ip.com/A-6A_DATA.INI put the ini file in to the Objects\Aircraft\A-6A, then happy flying. if you don't like it, just remove it or move it to some where else and the default will be loaded. according to the post at combatace, there are some parameters in the INI that increase the sensitivity of control surface when gear is lowered. i found those value and simply disable it. here they are: [LeftStabilizer] SystemType=CONTROL_SURFACE InputName=PITCH_CONTROL MovingSurface=TRUE MaxDeflection=6.3 MinDeflection=-9.5 HasGearDownSetting=FALSE <=== GearDownMaxDeflection=15.0 GearDownMinDeflection=-24.0 MaxControlSpeed=249.84 ControlRate=1.0 ModelNodeName=elevator_left ReverseModelOrientation=TRUE [RightStabilizer] SystemType=CONTROL_SURFACE InputName=PITCH_CONTROL MovingSurface=TRUE MaxDeflection=6.3 MinDeflection=-9.5 HasGearDownSetting=FALSE <=== GearDownMaxDeflection=15.0 GearDownMinDeflection=-24.0 MaxControlSpeed=249.84 ControlRate=1.0 ModelNodeName=elevator_right ReverseModelOrientation=TRUE [Rudder] SystemType=CONTROL_SURFACE InputName=YAW_CONTROL ReverseInput=TRUE MaxDeflection=4.0 MinDeflection=-4.0 HasGearDownSetting=FALSE <=== GearDownMaxDeflection=35.0 GearDownMinDeflection=-35.0 CDdc=0.0096 Cydc=0.1214 Cldc=0.0086 Cndc=-0.0121 CldcAlphaTableNumData=15 CldcAlphaTableDeltaX=4.00 CldcAlphaTableStartX=-28.00 CldcAlphaTableData=1.430,1.253,1.070,0.882,0.690,0.494,1.274,0.090,1.000,1.023,-0.214,-0.397,-0.633,-0.921,-1.256 CndcAlphaTableNumData=15 CndcAlphaTableDeltaX=4.00 CndcAlphaTableStartX=-28.00 CndcAlphaTableData=0.434,0.450,0.464,0.476,0.867,0.986,0.995,1.000,1.000,0.995,0.879,0.485,0.476,0.464,0.449 ControlRate=5.0 MaxControlSpeed=128 ModelNodeName=vertical_rudder_partA RotationAxis=Y-AXIS
+MigBuster Posted December 18, 2007 Posted December 18, 2007 Mayb that fix should be in the general download section because I dont think it was ever patched by 3W.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now