Jump to content
Sign in to follow this  
mejay855

A6 gear down handling

Recommended Posts


Here's a fix from my archieved documents:

 

nooby

Junior Member

Member # 29460

 

 

 

hey atr-driver, thanks to combatace.com, i found a post about our issue in the forum there and i have fixed it for my own.

 

here is my fix:

http://mwlue.no-ip.com/A-6A_DATA.INI

 

put the ini file in to the Objects\Aircraft\A-6A, then happy flying. if you don't like it, just remove it or move it to some where else and the default will be loaded.

 

according to the post at combatace, there are some parameters in the INI that increase the sensitivity of control surface when gear is lowered. i found those value and simply disable it.

 

here they are:

 

[LeftStabilizer]

SystemType=CONTROL_SURFACE

InputName=PITCH_CONTROL

MovingSurface=TRUE

MaxDeflection=6.3

MinDeflection=-9.5

HasGearDownSetting=FALSE <===

GearDownMaxDeflection=15.0

GearDownMinDeflection=-24.0

MaxControlSpeed=249.84

ControlRate=1.0

ModelNodeName=elevator_left

ReverseModelOrientation=TRUE

 

[RightStabilizer]

SystemType=CONTROL_SURFACE

InputName=PITCH_CONTROL

MovingSurface=TRUE

MaxDeflection=6.3

MinDeflection=-9.5

HasGearDownSetting=FALSE <===

GearDownMaxDeflection=15.0

GearDownMinDeflection=-24.0

MaxControlSpeed=249.84

ControlRate=1.0

ModelNodeName=elevator_right

ReverseModelOrientation=TRUE

 

[Rudder]

SystemType=CONTROL_SURFACE

InputName=YAW_CONTROL

ReverseInput=TRUE

MaxDeflection=4.0

MinDeflection=-4.0

HasGearDownSetting=FALSE <===

GearDownMaxDeflection=35.0

GearDownMinDeflection=-35.0

CDdc=0.0096

Cydc=0.1214

Cldc=0.0086

Cndc=-0.0121

CldcAlphaTableNumData=15

CldcAlphaTableDeltaX=4.00

CldcAlphaTableStartX=-28.00

CldcAlphaTableData=1.430,1.253,1.070,0.882,0.690,0.494,1.274,0.090,1.000,1.023,-0.214,-0.397,-0.633,-0.921,-1.256

CndcAlphaTableNumData=15

CndcAlphaTableDeltaX=4.00

CndcAlphaTableStartX=-28.00

CndcAlphaTableData=0.434,0.450,0.464,0.476,0.867,0.986,0.995,1.000,1.000,0.995,0.879,0.485,0.476,0.464,0.449

ControlRate=5.0

MaxControlSpeed=128

ModelNodeName=vertical_rudder_partA

RotationAxis=Y-AXIS

Share this post


Link to post
Share on other sites

On further review, that fix many not be valid. It appears to be old as my current A-6 data.ini does not have those lines with gear down settings. Either it was fixed in the last patch or I have someone's FM fix that changed it.

Share this post


Link to post
Share on other sites
Here's a fix from my archieved documents:

 

nooby

Junior Member

Member # 29460

 

THIS WORKED GREAT!THANX!!

 

hey atr-driver, thanks to combatace.com, i found a post about our issue in the forum there and i have fixed it for my own.

 

here is my fix:

http://mwlue.no-ip.com/A-6A_DATA.INI

 

put the ini file in to the Objects\Aircraft\A-6A, then happy flying. if you don't like it, just remove it or move it to some where else and the default will be loaded.

 

according to the post at combatace, there are some parameters in the INI that increase the sensitivity of control surface when gear is lowered. i found those value and simply disable it.

 

here they are:

 

[LeftStabilizer]

SystemType=CONTROL_SURFACE

InputName=PITCH_CONTROL

MovingSurface=TRUE

MaxDeflection=6.3

MinDeflection=-9.5

HasGearDownSetting=FALSE <===

GearDownMaxDeflection=15.0

GearDownMinDeflection=-24.0

MaxControlSpeed=249.84

ControlRate=1.0

ModelNodeName=elevator_left

ReverseModelOrientation=TRUE

 

[RightStabilizer]

SystemType=CONTROL_SURFACE

InputName=PITCH_CONTROL

MovingSurface=TRUE

MaxDeflection=6.3

MinDeflection=-9.5

HasGearDownSetting=FALSE <===

GearDownMaxDeflection=15.0

GearDownMinDeflection=-24.0

MaxControlSpeed=249.84

ControlRate=1.0

ModelNodeName=elevator_right

ReverseModelOrientation=TRUE

 

[Rudder]

SystemType=CONTROL_SURFACE

InputName=YAW_CONTROL

ReverseInput=TRUE

MaxDeflection=4.0

MinDeflection=-4.0

HasGearDownSetting=FALSE <===

GearDownMaxDeflection=35.0

GearDownMinDeflection=-35.0

CDdc=0.0096

Cydc=0.1214

Cldc=0.0086

Cndc=-0.0121

CldcAlphaTableNumData=15

CldcAlphaTableDeltaX=4.00

CldcAlphaTableStartX=-28.00

CldcAlphaTableData=1.430,1.253,1.070,0.882,0.690,0.494,1.274,0.090,1.000,1.023,-0.214,-0.397,-0.633,-0.921,-1.256

CndcAlphaTableNumData=15

CndcAlphaTableDeltaX=4.00

CndcAlphaTableStartX=-28.00

CndcAlphaTableData=0.434,0.450,0.464,0.476,0.867,0.986,0.995,1.000,1.000,0.995,0.879,0.485,0.476,0.464,0.449

ControlRate=5.0

MaxControlSpeed=128

ModelNodeName=vertical_rudder_partA

RotationAxis=Y-AXIS

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..