Jump to content
Sign in to follow this  
McCarty13

Quick question for newbie thread

Recommended Posts

Hey guys.

 

Where is this wonderful magical graphical editor that allows you to tweak the settings.

 

I found the config with the 5 sliders and the resolution but where is the other stuff at?

 

Also Im accessing CFSQC through the workshop and when i hit go to field. I get an error that says something about populating the field. But the QC seems fine....but then again I have nothing to gauge it against since this is my first week of OFF, so im not sure if I'm missing anything.

 

MM

Share this post


Link to post
Share on other sites

Hi,,

 

 

Im assuming you are getting to your sliders thru cfs3config in your obd directory..

 

 

gallery_45808_317_1405.jpg

 

click on the "window" above the sliders....

 

the options you want to set are "overides" and "texture info" ,,,these are where you will find the settings unlcleal described, or any other setting recommendations you might come across in the forums'

Edited by sitting_duck

Share this post


Link to post
Share on other sites
...

click on the "window" above the sliders....

...

 

When I first got OFF, it took me two or three days to realize I needed to click that "Window" label! Sheesh!! I felt REALLY stupid when I finally realized how to do it.

 

I haven't stopped hating that CFS3CONFIG thing since. A close second is the horrible joystick controller interface.

 

Boy, I gotta stop letting posts like this set me off like that! :biggrin: I'll go take my meds now.

Share this post


Link to post
Share on other sites
When I first got OFF, it took me two or three days to realize I needed to click that "Window" label! Sheesh!! I felt REALLY stupid when I finally realized how to do it.

 

I haven't stopped hating that CFS3CONFIG thing since. A close second is the horrible joystick controller interface.

 

Boy, I gotta stop letting posts like this set me off like that! :biggrin: I'll go take my meds now.

 

 

Ahhhhh the window tab.

 

Now I see. Thanks.

 

So I avoid the QC and just do it all at the hanger page? Thats good to know.

Share this post


Link to post
Share on other sites
Soo Far . . Soo Good

avatar40141_18.gif

Join

Clic ON the term FLIGHT TYPE

Yo

 

Clic on AIRCRAFT

You can choose the Aircraft you Fly

Also the Possible Loadout

All the German Aircraft ONLY have twin MGs, except the Fokker EIII with a single gun

British and French aircraft all have rockets or bombs, some you have a choice

There's also a Model 'T' Ford and a Moped if you get bored

 

Clic ON . . . LOCATION you can then choose

country of flight

area of country

airfield in area

Time of Day

Where you start

Weather

Season

 

Clic ON . . SKILL

skill of the enemy pilot

can the ground gunner hit an elefant or not

How will you initialy confront the enemy

 

Clic ON . . FIGHTER

You get to choose the type of aircraft that trys to Kill You

 

On the right side is HANGER . .a drop down menu, that speaks for itself

 

PS . . Those Rockets belong on a P47 both in accuracy and destuctive power, but they're alot of Fun jump.gifuser_online.gifreport.gif

 

--------------------

// pp-blank-thumb.pnggender_mystery.pngView Member Profile friend_add_small.pngAdd as Friend send_pm_small.pngSend Message find_posts.pngFind Member's Topics find_posts.pngFind Member's Posts ipsmenu.register( "post-member-267376", '', 'popmenubutton-new', 'popmenubutton-new-out' );

 

 

Thanks much!!

 

Im having an intermitent problem now.

 

First off every time I "go to field" I get a error message that says something about a problem populating the airfield. but it didnt seem to bother anything in QC

 

Now Im getting that message in campaign followed most times by another error at the WWI world splash screen that says "failed to load mission file". The only way out of this was to start another pilot. is this common, do i have a missing file somewhere?

 

MM

Share this post


Link to post
Share on other sites

If i am wrong about this,,hopefully someone will correct me...

 

Think ive read in the past,,that these messages are more annoyances,,than actuall problems..

 

If you go back to your cfs3config...and in overides,,,there are two settings,,,disable warnings boxes,,and disable advisory messages...if you click these,,,i think the messages will stop..

 

if i understand it right,,the other setting disable simulation warnings is for the things you see in the game like "near stall" and hits on your plane,,,but,,could be wrong about that...

Share this post


Link to post
Share on other sites
If i am wrong about this,,hopefully someone will correct me...

 

Think ive read in the past,,that these messages are more annoyances,,than actuall problems..

 

If you go back to your cfs3config...and in overides,,,there are two settings,,,disable warnings boxes,,and disable advisory messages...if you click these,,,i think the messages will stop..

 

if i understand it right,,the other setting disable simulation warnings is for the things you see in the game like "near stall" and hits on your plane,,,but,,could be wrong about that...

 

 

I believe it for the populating he air field message but the failed to load mission error would not allow me to advance to the mission. and the only way to get it to not do that was by switching to another pilot/campaign. so i figured maybe I'm missing something Ill see if its that pilot in particular o9r the squad I chose which was either Jasta 30 or 69.

Share this post


Link to post
Share on other sites

What year are you starting? If 1916, try starting your career a few months later or try another squadron.

Share this post


Link to post
Share on other sites
What year are you starting? If 1916, try starting your career a few months later or try another squadron.

 

 

I did start in 1916. It seems okay with this pilot at the moment. I am three missions in at Jasta 30. Haven't fired a shot yet but its been fun flying and seeing the NME.

 

I also had a good time filling out the flight log with a rather well written paragraph :biggrin: on what happened each flight...but it didn't save. So when I went back to look at my log, all my flourishy role playing BS was gone. :dntknw:

 

Can it be saved?

 

also what's the difference between scenery and terrain?

 

MM

Share this post


Link to post
Share on other sites
I did start in 1916. It seems okay with this pilot at the moment. I am three missions in at Jasta 30. Haven't fired a shot yet but its been fun flying and seeing the NME.

 

I also had a good time filling out the flight log with a rather well written paragraph :biggrin: on what happened each flight...but it didn't save. So when I went back to look at my log, all my flourishy role playing BS was gone. :dntknw:

 

Can it be saved?

 

also what's the difference between scenery and terrain?

 

MM

 

I spoke to soon my next flight I got the failed to load mission error.

Share this post


Link to post
Share on other sites

I'm not sure myself about the difference between scenery and terrain. Try setting one to one and the other to four and then switching settings to see if you notice any difference.

Share this post


Link to post
Share on other sites

There are some mentions of this in the FAQ. Also CFS3QC is hidden away for a reason, we don't control much in there. Use OFF QC or better still campaign, or if you need a quick fix wait for the new patch with new quick mode.

Share this post


Link to post
Share on other sites
In Phase II we had an actual control in Workshop. But now as then, if your installation starts to go south, you'll never know it, till it happens

 

 

Are you saying you think I should reinstall it all?

 

Its all fresh, brand new built pc, new fresh install of XP Pro

 

New fresh install of CFS and BHaH

 

these popup messages started happening almost immediately when I started using the workshop QC.

 

This other intermittent problem with the mission file not loading error seems to happen whenever they want to give me a fun mission, balloon busting, attacking aerodrome etc. both of those were consistent errors, I would have to leave, bring up a new pilot, take him into QC exit that, change back to my campaign pilot, start campaign again, and then I would have a patrol mission or something and it would play fine. Incidentally I have flown 6 mission and have not seen combat yet. every mission has been a patrol. I started in january 25th 1917 in Jasta 30 flying Halbs

Share this post


Link to post
Share on other sites
Not the whole ball of wax No . . .I'd uninstall BHaH, search for all files that contain 'Over Flanders Fields' Delete same.

Then do a SECOND search including your Hidden Folders, a couple always show up, failure to nail those puppies, whatever your problem was, it's sure to return again, and again, and again. Reinstall BHaH and stay AWAY from CFS3 QC. . .It would appear that's what caused your problem in the first place . . .Sooo who knew

 

You Can do all your Configuration from Workshop . . after Config has done it's thing . . it's all auto. Clic on File. . . then custom settings . . they will tell you the world will end . . soo clic OK. Whatever you seek is before you . . merely Clic on Window . . and make your selection.

 

The Only thing missing is Controls. START a campaign mission fly for 3 minutes, then press escape, the Hanger Menu appears before you, take what you need

 

You need to be around a while, as the developers speak in riddles. But I do believe CFS3 QC is destined to become a feature of the past, soon

 

I did as you asked and now I still get the cant populate airfield error (not sure if it even means anything) but now when I do QC through the workshop I go to field and the plane explodes. then anytime I make a change there a new plane explodes in place of the old one. Its rather annoying. Is this normal? It didnt do this before. did I miss a hidden file somewhere.

Share this post


Link to post
Share on other sites
You've got me by the short and curlies, as I run XP. And as such I've never seen those errors. But having your plane explode normally means your Sliders are too low

 

Other than that all I can say, this needs a Developer

 

Sliders too low?? really?

Share this post


Link to post
Share on other sites
You've got me by the short and curlies, as I run XP. And as such I've never seen those errors. But having your plane explode normally means your Sliders are too low

 

Other than that all I can say, this needs a Developer HAMMER

Share this post


Link to post
Share on other sites
I did as you asked and now I still get the cant populate airfield error (not sure if it even means anything)

 

I used to get the can't populate airfield message. I think it had something to do with the pilot I had at the time. Since he kicked the bucket the message has gone away. The message didn't seem to mean anything at all as the airfield looked ok to me.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..