+whiteknight06604 Posted June 6, 2010 Posted June 6, 2010 I for one would love it.All of your stuff gets used in my installs eventualy.
+Cliff7600 Posted June 6, 2010 Posted June 6, 2010 (edited) I think I spend hours of fun flying this one. I'll wait for it! Edited June 6, 2010 by Cliff11
+Veltro2k Posted August 3, 2010 Author Posted August 3, 2010 still the same problem ..Both props spins untill you give it full power, then front stops spinning and does nor start up again
+Veltro2k Posted August 6, 2010 Author Posted August 6, 2010 (edited) [FrontEngine] SystemType=PROP_ENGINE InputName=THROTTLE_CONTROL EngineID=1 SLPowerDry=2342260.0 ThrustAngles=0.0,0.0,0.0 ThrustPosition=0.0,6.5,0.0 ThrottleRate=0.5 AltitudeTableNumData=10 AltitudeTableDeltaX=1524 AltitudeTableStartX=0.0 AltitudeTableData=0.980,0.985,0.995,1.000,0.965,0.950,0.800,0.700,0.555,0.000 SpinnerNodeName=Spinner_F StaticPropNodeName=Prop_F SlowPropNodeName=SlowProp01 FastPropNodeName=FastProp01 SlowPropRPM=200 FastPropRPM=1650 MaxPropRPM=2750 IdlePropRPM=50 BSFC=0.010 ExhaustEmitterName=CleanExhaustEmitter ExhaustPosition=-0.35,3.0,0.00 FireSuppression=TRUE StructuralFactor=1.5 MinExtentPosition=-0.35,6.4,-0.6 MaxExtentPosition= 0.35,3.4, 0.6 PropRotationDirection=LEFT ReversePropOrientation=TRUE ConstantSpeed=TRUE NumBlades=2 PropDiameter=3.0 PropEfficiencyAdvanceRatioTableNumData=11 PropEfficiencyAdvanceRatioTableDeltaX=0.2 PropEfficiencyAdvanceRatioTableStartX=0.0 PropEfficiencyAdvanceRatioTableData=0.023,0.40,0.70,0.80,0.86,0.87,0.87,0.87,0.87,0.86,0.85 MomentOfInertia=0.05 MinManifoldPressure=0.35 MaxManifoldPressure=1.0 [RearEngine] SystemType=PROP_ENGINE InputName=THROTTLE_CONTROL EngineID=2 SLPowerDry=2342260.0 ThrustAngles=0.0,0.0,0.0 ThrustPosition=0.0,-6.5,0.7 ThrottleRate=0.5 AltitudeTableNumData=10 AltitudeTableDeltaX=1524 AltitudeTableStartX=0.0 AltitudeTableData=0.980,0.985,0.995,1.000,0.965,0.950,0.800,0.700,0.555,0.000 SpinnerNodeName=Spinner_R StaticPropNodeName=Prop_R SlowPropNodeName=SlowProp02 FastPropNodeName=FastProp02 SlowPropRPM=200 FastPropRPM=1650 MaxPropRPM=2750 IdlePropRPM=50 BSFC=0.010 ExhaustEmitterName=CleanExhaustEmitter ExhaustPosition=0.35,-2.0,0.0 FireSuppression=TRUE StructuralFactor=1.5 MinExtentPosition=-0.35,-0.6,-0.2 MaxExtentPosition= 0.35,-3.6, 1.0 PropRotationDirection=LEFT ReversePropOrientation=TRUE ConstantSpeed=TRUE NumBlades=2 PropDiameter=3.0 PropEfficiencyAdvanceRatioTableNumData=11 PropEfficiencyAdvanceRatioTableDeltaX=0.2 PropEfficiencyAdvanceRatioTableStartX=0.0 PropEfficiencyAdvanceRatioTableData=0.023,0.40,0.70,0.80,0.86,0.87,0.87,0.87,0.87,0.86,0.85 MomentOfInertia=0.05 MinManifoldPressure=0.35 MaxManifoldPressure=1.0 Edited August 6, 2010 by Veltro2k
sparky Posted August 28, 2010 Posted August 28, 2010 I'll stress this just a guess... Rear prop has off-centre thrust-line, therefore full power will push nose down....maybe front prop is then striking ground. Suggest try reducing front prop diameter to see if solves the problem. Alan
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now