Grinseed 19 Posted December 2, 2010 Salute all. When flying the F2B with the F1 cockpit view, what passes for the Aldis sight is too low to sight through. You can only see over the top of it. Panning in the F2 mode brings the sight up to the very top of the screen, making it hard to use in dogfights. I am assuming there is a tweak for lowering the POV , lowering the seat or removing a few pillows? Thanks in advance for any help. Cheers Grinseed. Share this post Link to post Share on other sites
Steve43 0 Posted December 6, 2010 Hi Grinseed, Try this: Open your Fe2B_Cockpit.ini and change these lines in the (CockpitSeat001) section to read as below : [CockpitSeat001] ModelName=Fe2B_Pit-R1.LOD HideExternalNodeName=cockpit OpenCockpit=TRUE ExternalClipDistMin=0.05 Position=0.00,1.2926,0.5344 <------- Offset=0.0,-0.1,-0.02 <-------- ViewAngles=0.0,-13.0,0.0 <-------- MaxYaw=178 MinYaw=-178 MaxPitch=90 MinPitchFront=-70 MinPitchRear=-60 MinMovementX=-0.1 MaxMovementX=0.1 MinMovementZ=-0.1 MaxMovementZ=0.1 LightRange=1.5 LightInnerConeAngle=43 LightOuterConeAngle=60 LightAngles=0.0,-35.0,0.0 DiffuseLightFactor=0.5 NightLightOn=0.25 NightLightColor=0.5,0.2,0.3 Gunsight=GunsightFront Instrument[001]=StickRoll Instrument[002]=StickPitch Instrument[003]=RudderPedals Instrument[004]=Throttle Instrument[005]=Altimeter Instrument[006]=AirSpeed Instrument[007]=RPM Instrument[008]=Compass Share this post Link to post Share on other sites
+ojcar 157 Posted December 6, 2010 Sorry, Steve, but the plane is the F2B, instead the FE2B...Your numbers doesn't work in the F2B. Grinseed try open the cockpit file, search for [CockpitSeat001]and do some changes in the Position line (the third number adds or remove the pillows :wink2: ) Share this post Link to post Share on other sites
Grinseed 19 Posted December 7, 2010 Thank you gentlemen. Steve, you went to a bit of trouble there and I appreciate it. Its been more than once I've been fooled by the BE, FE8, RE, B2F, BE2F etc etc. Bloody poms. Ojcar you hit the nail right on the head. For those interested the original setting for the third number in the Position line was 0.7641. I have selected 0.7230 which brings the viewpoint down to the gun sight. It might need a bit more tweaking to make it exactly accurate but it will be fine enough for a dog fight. If nothing else I have learned how adaptable this engine is and how precise. Hats off to TK! Cheers Grinseed Share this post Link to post Share on other sites
DukeIronHand 8 Posted December 16, 2010 I made the change to all the aforementioned aircraft..FE2B, FE2D, F2B, and F2Ba. Thanks to all for the contributions. Share this post Link to post Share on other sites