-
Similar Content
-
By franconinja14
FAA F-16BM Block 10 (Argentine Air Force) v1.0
View File This is the First Argentine F-16BM, actually M-1210, Previously ET-210
The pack has two schematics: one that was actually presented here in Tandil, Buenos Aires, Argentina, and the other that was presented during the purchase confirmation, which remains fictional for now since the official schematic is unknown.
The official schematics and data for avionics, radars, etc. will be created and published in future updates.
General credits to Ravenclaw_007, Menrva and Team Viper
- 3D Model Modified by Ravenclaw_007
- Weapons proporcioned by Ravenclaw_007 And 3 extra weapons created by Franconinja14
- New skins by franconinja14, using the Team Viper F-16C Templates and modified by Franconinja14.
- Detailed Menrva F-22 pilot model
- Detailed Team Viper ejection seat.
- Sounds, Effects and fuel tanks proporcioned by Team Viper.
Submitter franconinja14 Submitted 04/30/2025 Category F-16
-
By franconinja14
This is the First Argentine F-16BM, actually M-1210, Previously ET-210
The pack has two schematics: one that was actually presented here in Tandil, Buenos Aires, Argentina, and the other that was presented during the purchase confirmation, which remains fictional for now since the official schematic is unknown.
The official schematics and data for avionics, radars, etc. will be created and published in future updates.
General credits to Ravenclaw_007, Menrva and Team Viper
- 3D Model Modified by Ravenclaw_007
- Weapons proporcioned by Ravenclaw_007 And 3 extra weapons created by Franconinja14
- New skins by franconinja14, using the Team Viper F-16C Templates and modified by Franconinja14.
- Detailed Menrva F-22 pilot model
- Detailed Team Viper ejection seat.
- Sounds, Effects and fuel tanks proporcioned by Team Viper.
-
By dtmdragon
View File F-16XL for SF2 – F-16E Blk 62 Fighting Falcon
F-16XL for SF2 – F-16E Blk 62 Fighting Falcon 2.1
In March 1981, the USAF announced the Enhanced Tactical Fighter (ETF) program to procure a replacement for the F-111. The program was later renamed the Dual-Role Fighter (DRF) competition. The concept envisioned an aircraft capable of launching deep air interdiction missions without requiring additional support by fighter escort or jamming. General Dynamics submitted the F-16XL, while McDonnell Douglas submitted the F-15E.
As we all know the F-15E was chosen... BUT what if the F-16XL had been chosen instead?
And so I give you the F-16E/F Block 62 Fighting Falcon.
The designation F-16E/F Block 60/62 would have been used had the XL been selected (The F-16E/F Desert Falcon as we know it today wasn't even on the drawing board in the late 80's).
Included in this mod are:
- F-16E (XL) Blk 62 Fighting Falcon
- F-16EM (XL) Blk 62 Fighting Falcon (CUPID mods)
- F-16EV (XL) Blk 62 Fighting Falcon (AN/APG-83 AESA radar upgrade)
- 8 different USAF squadrons.
To Install simply un pack and drop into your mods folder.
Notes:
- The weapon stations are quite complicated due to the set up on the real aircraft itself and the limitations in SF2 with the maximum amount of hard-points etc. As such it is best to use the default load out from the loadout.ini. That being said if you do want to change it at the loadout screen you need to follow these rules: If the default loadout uses rail launched weapons (Aim-9/120, AGM-65/88) under the inner wings, only change it for another rail launched weapon and vice-versa. This is because the weapon rails are loaded as an EP class weapon that doesn't show up at the loadout screen.
- The default 'Attack' loadout is designed for the mass anti-armour mission as that is the kind of CAS mission SF2 generates. However in the loadout.ini file under each 'attack' loadout entry is a CAS loadout option with LGB etc.
- There are a ton of different loadout options in the loadout.ini file so check them out with the single mission editor.
- Loadouts are based on the F-16C Blk 40/42 but with an F-15E Strike Eagle flavor e.g. AGM-130
- Shadows are deactivated as 'tractor beams' are an issue as it is an older .lod
2.1 Changes:
- Added missing 20mm M61A1 Vulcan (PGU-28) to 'Guns' folder. PGU-28 loads generally don't have tracers.
2.0 Changes:
- F-16EV (XL) Blk 62 Fighting Falcon added.
- Loadout.ini and weapon station fixes.
- Cockpits changed to Block 42 type with WAR hud as LANTIRN would have been fully integrated on the jet.
- Ferris test skin added for F-16E (XL) Blk 62 Fighting Falcon.
- Canopy RCS reducing tinting added as per F-16C/CM Block 40/42.
- Semi- conformal AIM-120 station position and angles corrected.
- Internal ECM changed to AN/ALQ-165 Airborne Self-Protection Jammer (ASPJ) as was planned for production aircraft.
Released under the CA fair use agreement.
Credits:
The Viper Team
The Mudhen Maintenance Team 2016
Viper63a
USAFMTL
Dave
ravenclaw_007
Original Model by wpnssgt via Swede
Dels
moonjumper
Fubar512
creepin death
Mirage Factory
Enjoy,
Dan.
Submitter dtmdragon Submitted 04/27/2016 Category What If Hangar
-
By dtmdragon
F-16XL for SF2 – F-16E Blk 62 Fighting Falcon 2.1
In March 1981, the USAF announced the Enhanced Tactical Fighter (ETF) program to procure a replacement for the F-111. The program was later renamed the Dual-Role Fighter (DRF) competition. The concept envisioned an aircraft capable of launching deep air interdiction missions without requiring additional support by fighter escort or jamming. General Dynamics submitted the F-16XL, while McDonnell Douglas submitted the F-15E.
As we all know the F-15E was chosen... BUT what if the F-16XL had been chosen instead?
And so I give you the F-16E/F Block 62 Fighting Falcon.
The designation F-16E/F Block 60/62 would have been used had the XL been selected (The F-16E/F Desert Falcon as we know it today wasn't even on the drawing board in the late 80's).
Included in this mod are:
- F-16E (XL) Blk 62 Fighting Falcon
- F-16EM (XL) Blk 62 Fighting Falcon (CUPID mods)
- F-16EV (XL) Blk 62 Fighting Falcon (AN/APG-83 AESA radar upgrade)
- 8 different USAF squadrons.
To Install simply un pack and drop into your mods folder.
Notes:
- The weapon stations are quite complicated due to the set up on the real aircraft itself and the limitations in SF2 with the maximum amount of hard-points etc. As such it is best to use the default load out from the loadout.ini. That being said if you do want to change it at the loadout screen you need to follow these rules: If the default loadout uses rail launched weapons (Aim-9/120, AGM-65/88) under the inner wings, only change it for another rail launched weapon and vice-versa. This is because the weapon rails are loaded as an EP class weapon that doesn't show up at the loadout screen.
- The default 'Attack' loadout is designed for the mass anti-armour mission as that is the kind of CAS mission SF2 generates. However in the loadout.ini file under each 'attack' loadout entry is a CAS loadout option with LGB etc.
- There are a ton of different loadout options in the loadout.ini file so check them out with the single mission editor.
- Loadouts are based on the F-16C Blk 40/42 but with an F-15E Strike Eagle flavor e.g. AGM-130
- Shadows are deactivated as 'tractor beams' are an issue as it is an older .lod
2.1 Changes:
- Added missing 20mm M61A1 Vulcan (PGU-28) to 'Guns' folder. PGU-28 loads generally don't have tracers.
2.0 Changes:
- F-16EV (XL) Blk 62 Fighting Falcon added.
- Loadout.ini and weapon station fixes.
- Cockpits changed to Block 42 type with WAR hud as LANTIRN would have been fully integrated on the jet.
- Ferris test skin added for F-16E (XL) Blk 62 Fighting Falcon.
- Canopy RCS reducing tinting added as per F-16C/CM Block 40/42.
- Semi- conformal AIM-120 station position and angles corrected.
- Internal ECM changed to AN/ALQ-165 Airborne Self-Protection Jammer (ASPJ) as was planned for production aircraft.
Released under the CA fair use agreement.
Credits:
The Viper Team
The Mudhen Maintenance Team 2016
Viper63a
USAFMTL
Dave
ravenclaw_007
Original Model by wpnssgt via Swede
Dels
moonjumper
Fubar512
creepin death
Mirage Factory
Enjoy,
Dan.
-
