Jump to content
Sign in to follow this  
MigBuster

Falcon 4 BMS 4.34 Update 2 released

Recommended Posts

2019-06-04_204812.thumb.png.48d9b3cb6e211c0a8c724cca50d7726f.png

Ladies and Gentlemen,

on behalf of the entire BMS development team, I am happy to announce that the latest iteration of the Billion Soft Falcon 4.0 total conversion modification - Benchmark Sims 4.34 U2 - is available for you to enjoy as of RIGHT NOW!

BMS 4.34 U2 requires a legit installation of a Falcon 4.0 (all older and newer versions are accepted alike, i.e. Microprose, Hasbro, GOG, Steam, Retroism). The check is performed both at setup time and every time you start BMS. If no valid installation is found, BMS will exit with a corresponding error message.

U2 is an incremental update on top of 4.34 base + U1, so you need to have the BMS 4.34 Full Installer package and Update 1 available on your PC. You can both update your existing 4.34 base + U1 installation as well as perform a fresh 4.34 base + U1 + U2 installation from scratch, as you like. See the installation instructions below for details.


This mod may not be used for any commercial purposes. Any such use may constitute a violation of the intellectual property of Billion Soft (Hong Kong) Limited and the non-commercial Terms and Conditions under which Benchmark Sims make this mod available to you.

 

 

NOTES:

— The build number string in the Falcon UI will read "4.34.2 (x64) Build 20805" after the update.
— The shortcuts in the start menu and on your desktop will NOT be renamed to U2, they will still read "Falcon BMS 4.34" after the update.
— If you have any questions or found bugs regarding the change log items please always! reference the revision number, e.g. "(r12345)".
— The 4.34.0 manuals remain valid.
— None of the .ini or .cfg files will be changed.


U2 FIXES & IMPROVEMENTS:

— CTD safeguard in case of bad PT crossing definition in DB. (r20778)
— CTD fix for a CTD during BMS exit. (r20771)
— CTD fix on Choongwoon. (r11869)
— Fixed BMS Editor messing up data when exporting / importing objective data. (r20767)
— TvT: Set "Lock Client MP" flag for all ground units, relocated Awacs, Tanker and Jstar squadrons, VALIDAC.ACT file adjusted accordingly. (r11887)
— All Airbases: Checked and fixed lettering & crossing. (r11869)
— Fixed F-16 RSAF cockpit RWR issue. (r11868)
— Corrected stations+ils.dat file due to wrong ILS frequency for Taegu airbase. (r11867)
— Fix for cloud restriction being incorrectly applied in deterministic / probabilistic weather. (r20779)
— Fix for g_nFairCloudRestriction and g_nPoorInclCloudRestriction not reducing the number of cells displayed. (r20779)
- Fixed interpolation issues with fog and skyfog. (r20801)
— Fix Power Engine P1 vs RPM Idle interpolation chart. (r20780)
  * This bug was responsible of a wrong deceleration of our current model vs HFFM in the high supersonic region for GE engines.
— Fixed an error at manual flight fragging in campaign due to bad team assignation. (r20781)
— Fix flights being automatically started in flight if the Take off Time or TOT was moved 1H backward in the package page. (r20781)
— Fix error of "no Slots available" when moving Take off Time or TOT despite slots being obviously available. (r20781)

 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By MigBuster
       
       
      Ladies and Gentlemen,
      On behalf of the entire BMS development team, I am happy to announce that the latest iteration of the Microprose Falcon 4.0 total conversion modification - Benchmark Sims 4.37 U4 - is available for you to enjoy RIGHT NOW!
      BMS 4.37 U4 requires a legit installation of a Falcon 4.0 (all older and newer versions are accepted alike, i.e. Microprose, Hasbro, GOG, Steam, Retroism). The check is performed both at setup time and every time you start BMS. If no valid installation is found, BMS will exit with a corresponding error message.
      DISCLAIMER: Please make sure to have a clean base (no installed mods) before update…
      For those of you who are new to Falcon and still need a legacy Falcon 4.0 license, you’re lucky, as there are various season sales going on.
      Retroism GOG If you have already installed BMS 4.37 Full Installer you will need to launch the “updater.exe” in Falcon BMS root folder (or from the new launcher). Alternatively, you can use the offline incremental installer available on the Falcon BMS Download page.
      This mod may not be used for any commercial purposes. Any such use may constitute a violation of the intellectual property of Tommo Inc and the non-commercial Terms and Conditions under which Benchmark Sims make this mod available to you.
      After the update, when starting BMS, the version string in the BMS UI will now read:
      FALCON BMS 4.37.4 (X64) BUILD 2355
      A big THANK YOU to everyone in the BMS development team and to the gents from Microprose and Tommo who made this release possible!
      Changelog:
      https://www.falcon-bms.com/changelogs/falcon-bms-4-37-4/
       
       
       
       
      (Text from BMS)
       

    • By MigBuster
      New 2024 interview with Falcon 4.0 campaign creator Kevin Klemmick.
       
       
    • By MigBuster

       
      The latest iteration of the Tommo Inc Falcon 4.0 total conversion modification - Benchmark Sims 4.37 U3 - is available for you to enjoy RIGHT NOW with some major changes ( See change log below)
      BMS 4.37 U3 requires a legit installation of a Falcon 4.0 (all older and newer versions are accepted alike, i.e. Microprose, Hasbro, GOG, Steam, Retroism). The check is performed both at setup time and every time you start BMS. If no valid installation is found, BMS will exit with a corresponding error message.
      For those of you who are new to Falcon and still need a legacy Falcon 4.0 license, you’re lucky, as there are various season sales going on.
      Retroism
      GOG

      If you have already installed BMS 4.37 Full Installer you will need to launch the “updater.exe” in Falcon BMS root folder (or from the new launcher). Alternatively, you can use the offline incremental installer available on the Falcon BMS Download page.
      This mod may not be used for any commercial purposes. Any such use may constitute a violation of the intellectual property of Tommo Inc and the non-commercial Terms and Conditions under which Benchmark Sims make this mod available to you.
      After the update, when starting BMS, the version string in the BMS UI will now read:
      FALCON BMS 4.37.3 (X64) BUILD 1329
      CHANGELOG
      https://www.falcon-bms.com/changelogs/falcon-bms-4-37-3/
       
      A big THANK YOU to everyone in the BMS development team and to the gents from TOMMO INC who made this release possible!
       
      Download
      https://www.falcon-bms.com/downloads/
    • By MigBuster

       
      Microprose announce they have reacquired the copyright for the Falcon series and sounds like there will be upcoming work along with continuing to work with Benchmark Sims (BMS).
       

       

       
    • By MigBuster
       

       
      The latest iteration of the Tommo Inc Falcon 4.0 total conversion modification - Benchmark Sims 4.37 U2 - is available for you to enjoy RIGHT NOW!
      BMS 4.37 U2 requires a legit installation of a Falcon 4.0 (all older and newer versions are accepted alike, i.e. Microprose, Hasbro, GOG, Steam, Retroism). The check is performed both at setup time and every time you start BMS. If no valid installation is found, BMS will exit with a corresponding error message.
      For those of you who are new to Falcon and still need a legacy Falcon 4.0 license, you’re lucky, as there are various season sales going on.
      Retroism
      GOG

      If you have already installed BMS 4.37 Full Installer you will need to launch the “updater.exe” in Falcon BMS root folder (or from the new launcher). Alternatively, you can use the offline incremental installer available on the Falcon BMS Download page.
      This mod may not be used for any commercial purposes. Any such use may constitute a violation of the intellectual property of Tommo Inc and the non-commercial Terms and Conditions under which Benchmark Sims make this mod available to you.
      After the update, when starting BMS, the version string in the BMS UI will now read:
      FALCON BMS 4.37.2 (X64) BUILD 521
      DISCLAIMER: Do not update over a modded 3D KTO Database, it will corrupt your install…
       
      CHANGELOG
      https://www.falcon-bms.com/changelogs/falcon-bms-4-37-2/
       
      A big THANK YOU to everyone in the BMS development team and to the gents from TOMMO INC who made this release possible!
       
       
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..