Jump to content

Ivankuturkokoff

NEW MEMBER
  • Content count

    12
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Ivankuturkokoff

  1. Avionics

    As real as you can make it IMO. The radars we are talking about are pretty simple affairs, No TWS for instance, other than boresight no ACM modes. In the case of the Mirage ALL the info you need is available ... to whatever ever detail you decide to take it. As to NAV systems again pretty simple affairs in the case of the A4, Mirage and dagger. A little more complex in the case of the sea Harrier.
  2. what am I doing now?

    Great Video. A small point. i notice the G meter datum is zero... It should be 1 :)
  3. talk to me about how jet engines behave

    I wish :) I once was profecient in Reverse Polish on an HP41C but thats it . Happy New Year
  4. talk to me about how jet engines behave

    Scary Jet engines are fairly straight forward. The biggest controling variable is Fuel flow. the pilots throttle can be thought of as a a Fuel flow control, a bit like a gate valve. More Fuel Flow more thrust ... but :) However a number of modifying devices exist between the Throttle and the the engine. These devices control things like Engine acceleration, Fuel air ratios, initial ignition, and Jet pipe temperature limitation. Given that there is a large rotational mass in the jet engine especially fan type engines like the Pegasus you dont have instant engine control. It is imperative that the demanded Fuel flow (by the pilot) is matched with engine RPM. If its not nasty things like compressor stalls and surges ocurr. essentially because you are feeding too much fuel into the engine for not enough air flow. Since Air Flow is a function of RPM. To control this is a device called an Acceleration Fuel Ratio Control unit or AFRCU exists. It takes the pilot demanded Fuel Flow and then smothly matches this to engine RPM via a predetermined schedule known as an operating line. Altitude corrections are also feed in to ensure stable Fuel Air ratios are always maintained. The engine also has its own dedicated High pressure fuel pump to ensure pressure fuel is available for the other control units to deliver to the burners. In the case of Afterburning aeroplanes (Ak Mirage/Dagger) an aditional AB or "Turbo fuel pump" is there dedicted solely to AB operation. IDLE/MAX RPM IDLE limits are set to ensure stable minimum thrust values. This Idle value will also vary with altitude to ensure enough Bleed air is available to maintain cockpit pressuristion. Max RPM is typically there as a structural limit and to ensure reasonable engine life. Some real numbers. The Mirage ATAR 9C has an idle of 2900+-200RPM. Max RPM is 8460RPM and 8710 when Overspeed is permitted. Typical JPT limits 680deg C to 740DegC. The Mirage uses actual RPM values but most other aeroplanes (Harrier) uses %RPM. However typically max RPM is usually more than 100%. Harrier limits (these are TMK4 values however... Dante has these as well) MAX RPM No water injection 103.5%, JPT 715deg C. With water Injection 107.0% and 745deg C. These are very time limited vales ..no more than say 1.5mins. Maximum Continous 89% 540deg C. Absolutely No Sh.. RPM limit 108% momentarily. I will chase up some idle values for you as well. SPOOL UP TIMES Because there is a large rotational mass and that Acceleration must follow a schedule you dont have instantaenous RPM control in a jet engine. A typical value from Idle to 100% will take 8 seconds or so. This rate is also not linear, it gets faster at the upper end. From an effciency point of view The Jet engine likes to operate up around the 90% mark. Any faster or slower will vary thrust but effciency drops off. JET PIPE TEMPERARTURE LIMITS (JPT) JPT control is essential, Without it things like turbines can get cooked really quickly. The simplest method is by the pilot. He attempts to select say maximum thrust and observes JPT. In most cases it will be fine as careful design should prevent gross exceedences. If tHe pilot sees a limit approaching he must limit fuel flow. This will have an almost immediate response on the JPT guage (Though RPM will have a certain lag). GOOD REFRENCES If you can get hold of a second hand copy of the Rollys Royce publication The "Jet Engine" you will have most of the theoretical info you need. Hope this helps
  5. what am I doing now?

    Gulp ... pretty impressive AVI.
  6. what am I doing now?

    This is looking fantastic great work Scary and Dante. I cannot wait to fly this Sim. Dante regarding the Artificial Horizon, it looks unusual only since the bank refrence pointer is missing.
  7. Fuse Arming

    Here are some real mirage III MK82 Snakeye balistics. If we assume a Zero dive angle 100Foot release at 500Knots (any faster and the HD fins could rip off) the time of flight is 2.59Sec. Though Safe escape in this release is questionable :ph34r:
  8. Fuse Arming

    The well known subject of a lot of Argentine bombs not arming due to release altitudes being so low and Times of flight less than fuse arming time. Does anyone now for sure what bomb and fuse combinations the Argentine Air Force were using ? Is there any historical data on the fuse settings used ?
  9. Mirage V Sea Harrier

    The images are NOT Falkland War images Aceman but post war ACM excercise images :) RN v RAAF
  10. Mirage V Sea Harrier

    RN Sea Harrier FRS MK 1 being Photogenic for RAAF Mirage IIIO :D
  11. 1 More Little Video

    Stunning video, but real pilots strafe with 30MM Defa's :)
  12. What Are You Looking Foward Too??

    A really accurate Mirage III :)
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..