Jump to content

Geary

+PREMIER MEMBER
  • Content count

    1,289
  • Joined

  • Last visited

  • Days Won

    25

Files posted by Geary

  1. F8F Bearcat Redrawn Lines, Rivets, etc..

    Redrawn Lines, Rivets, etc.. for the Geo's F8F Bearcat.
    It can be used for SF1 or SF2.
    Add your own paint, dirt, details, decals and weathering...
    I can't remember why I made this template (I must have had some extra rivets laying around) as there are already some excellent skins for this plane by Geo, Pappychksix, paulopanz and Wrench and much of this template was based on some of those skins. 
    This is a WIP-Finish-It-Yourself template and is in Photoshop .psd format at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers. It's still a bit rough around the edges, but you can smooth out any rough edges to your desires.
    -----------------------------
    If you want to make the lines and rivets darker or lighter, this template allows you to do that by adjusting the opacity of the lines, rivets or any layer of this file. You can also 'Click' off any layer you don't wish to use, such as the rivets layer if you don't wish to have any rivets. To use it you must have a paint program that reads/modifies .psd files.
    Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
    I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
    ---------------------------
    Credit and Thanks to Geo for this nifty little jet.
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 
    If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 
    Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
    Geary

    57 downloads

       (0 reviews)

    0 comments

    Submitted

  2. SF2 F-80_T-33_F-94_Redrawn Lines, Rivets, etc...

    Redrawn Lines, Rivets, etc.. for ErikGen's F-80/T-33/F-94 SF2 KAW set.
    Add your own paint, dirt, details and weathering.
    I made these templates so I could make natural metal/aluminum skins for these planes.
    ------------
    These templates are more like WIPs. They are a bit rough and can use some improvement. They could use some organizing. I don't think I'll be doing anymore to them, so feel free to improve them in any way you wish.
    These templates are Photoshop .psd files at 2048 pixels. They have redrawn lines, rivets and various bits. They can be reduced for those with low spec computers.
    Soulfreak has released an excellent Hi-Rez RT-33A template for the 2 seater Shooting Star at 4096 pixels.
    ------------
    If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. You can also 'Click' off any layer you don't wish to use, such as the rivets layer, if you don't wish to have any rivets. To use it you must have a paint program that reads/modifies .psd files.
    Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
    I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
    ------------
    Credit and Thanks to:
    ErikGen for this great plane set.
    Wrench for all of the original skins I repainted except for the F-94 skin.
    paulopanz for the original F-94 skin I repainted.
    ------------
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 
    If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 
    Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
    Geary

    86 downloads

       (1 review)

    0 comments

    Submitted

  3. P-47N-15_Redrawn Lines, Rivets, etc.. by RussoUK2004

    Redrawn Lines, Rivets, etc.. for the P-47N-15 Thunderbolt by RussoUK2004.
    It can be used for SF1 or SF2.
    Add your own paint, dirt, details and weathering.
    This template is a Photoshop .psd file at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers. It was based on RussoUK2004's template.
    The only skin with this template is USAF Natural Metal / Aluminum.
    If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
    Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
    I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
    Credit and Thanks to RussoUK2004 for this classic plane.

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

    If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

    Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
     
    Geary

    41 downloads

       (0 reviews)

    0 comments

    Updated

  4. F-84E/G Thunderjet Redrawn Lines, Rivets, etc..

    Redrawn Lines, Rivets, etc.. for the beautiful F-84E/G Thunderjet by RussoUK2004.
    It can be used for SF1 or SF2.
    This template is a Photoshop .psd file at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers.
    The only skin with this template is USAF Natural Metal / Aluminum.
    Add your own paint, dirt, details and weathering.
    If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
    Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
    I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
     
    Credit and Thanks to RussoUK2004 for this nifty little jet and Wrench for the colorful skins he's made for it.
     
    INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

    If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

    Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
     
    Geary
     

    60 downloads

       (0 reviews)

    0 comments

    Submitted

  5. F-84F_TMF_4096pixel_Redrawn Lines & Rivets

    Redrawn Lines, Rivets, etc.. for the Mirage Factory's beautiful little F-84F Thunderstreak.
    It can be used for SF1 or SF2.
    This template is a .psd file at 4096 pixels. It can be reduced for those with low spec computers.
    It was made using Photoshop. It has redrawn lines, rivets and various bits.
    I had completed about half of this template when I discovered PappyChkSix's template and beautiful skins. Kicked myself repeatedly and at great length but I was also happy to discover the skins. Some of this template is based on and inspired by his original template and works.
    The only skin with this template is USAF Natural Metal / Aluminum.
    If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
    Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
    I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
    Add your own dirt, details and weathering.
    Credit and Thanks to the Mirage Factory for this great little jet.

    INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

    If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

    Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
     
    Geary

    55 downloads

       (1 review)

    0 comments

    Submitted

  6. TW_C-130A_2048pixel_Photoshop_Template

    Skin Template for the ThirdWire C-130A Hercules.

    It can be used for SF1 or SF2.

    This template is a .psd file at 2048 pixels. It can be reduced for those with low spec computers.

    It was made using Photoshop.

    Before anyone asks if I can make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.

    Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.

    Add your own dirt and weathering.

    If you just want the Natural Metal / Silver skin depicted in the attached picture, PM me.

    If you need help, PM me.

    INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

    If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

    Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
     
    Geary
    TW_C-130A_Template.7z

    36 downloads

       (0 reviews)

    0 comments

    Updated

  7. SF1 F-80C/T-33A/F-94B/RF-80A KAW Skin Pack

    SF1 F-80C/T-33A/F-94B/RF-80A Korean War Skin Pack

    For Pasko/Gramps/Column5's F-80C/T-33A/F-94B models.
    Updated skins for SF1 Korean War install.
    Contains Korean War skins for the following aircraft and units:
    F-80C Shooting Star:
    35th FBS
    36th FBS
    80th FBS
    F-94B Starfire:
    68th FIS
    RF-80A Photo/Recon Shooting Star:
    15th TRS
    T-33A Shooting Star Trainer, Hack & FAC:
    35th FBS
    36th FBS
    80th FBS
    (These T-33A skins are fictional.  I've found very little info/pictures of T-33's in the Korean War.  What I have pieced together says T-33's were used as trainers, taxi's, forward air controllers and whatever the unit wanted or was able to do with them.  I painted these with a little poetic license to match the 3 F-80C unit skins provided in this download.)
    These skins are in BMP format at 1024 x 1024 pixels.
    These are old models and have a few anomolies such as bleeding color from templates.

    Thanks and credit goes to:
    Pasko/Gramps/Column5 - for the aircraft models.
    Wrench - for the decals and skins from the SF2 KAW skins pack for EricGen's SF2 F-80C/T-33A/F-94B/RF-80C from which I borrowed.  Also for the original Templates I modified.
    PauloPanz - for the 68th FIS skin for ErikGen's SF2 F-94B from which I borrowed pieces.
    pappychksix - for original SF1 F-80C Korean War pack skins I repainted.
    Muesli / pappychksix(?) - for OD Green Camo skin I modified/repainted for the RF-80A.
    Geary - for reworking everyone else's work; new lines and rivets, etc.; repaints; cameras on RF-80A; small tweaks.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's work or property or claim it as my own.  Please contact me to correct any error.

    INSTALLATION:  You must have Pasko/Gramps/Column5's F-80C/T-33A/F-94B models.  They can be found in the CA SF1 download section.  Unzip this download to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the slin folders into their corresponding aircraft folders in your SF1 Korea install. Fly.

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. Otherwise, please give credit to those due it. 

    If you find any problems with it, please PM me.  If you improve it, please share. 
     
    Geary

    56 downloads

       (0 reviews)

    0 comments

    Updated

  8. SF1 Korean War Corsair Pack for TMF F4U7/AU-1

    SF1 Korean War Corsair Pack
    For the TMF F4U7 / AU-1 Corsair.
    These are converted/repainted skins and ini file tweaks of Wrench's SF2 Corsairs paks for use in a SF1 Korea War install.  This is a complete aircraft pak containing 4 different Corsair versions and 23 unit skins.

    The skins are in .bmp format at 1024 x 1024 pixels each.
    -----------------------------------------------------------------------
    Thanks and credit go to (from Wrench's original read me file).
    "TMF/Mod Mafia for ALL these Corsairs: with special thanks to BPAO - we miss you Oli!
    and also to Crusader, Mod Mafia Leader (xTMF)
    RussoUK for the engine sound, borrowed from the P-47N
    Me, for alot of the skins and decals and some ini reworking and assembling the package, and bottle washing.
    More Skins by CrazyHorseB34 (thanks man!)."
    And to Geary - for new lines, rivets, repaints, conversions, ini tweaks, a few decals, adding .50 cal painted gun ports to F4U-4, etc...
    But, especially to Wrench for all the work he did in putting the original Corsair paks together.
    --------------------------------------------------------------------
    I used parts and pieces from Wrench's sf2_kaw_f4u4_cosairs_pak, his sf2_f4u5_corsair_pak, his sf2_kaw_corsairs file and his SF1 f4u4b_pak to get some of these tweaks to work in SF1.

    ---------- Installation Instructions --------------------------
    If you have any of these aircraft installed, you must rename or remove them.
    INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your SF1 Korea install. Fly.

    If you don't have the correct weapons, look in the many weapons packs available here at CombatAce.

    There's a repainted m38_jeep.bmp that the 500lb and 1000lb bomb use as a skin.  If you want to use it, just drop it into your weapons folder and overwrite the old one.
    -----------------------------------------------
    I've included a repainted drop tank to match the aircraft skin color.  Installation instructions are in the Weapons folder and in the SF1 Knowledge Base.
    -------------------------------------------------

    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's work or property or claim it as my own.  Please contact me to correct any error.
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  Otherwise, please give credit to those due it. 
    If you find any problems with it, please PM me.  If you improve it, please share. 

    Geary
     
     
     

    47 downloads

       (0 reviews)

    0 comments

    Updated

  9. SF2 Korean War Corsair Pack (Re-Skinned)

    SF2 Korean War Corsair Pack (Re-Skinned)
    For the TMF F4U7 / AU-1 Corsair.
    These are relined and repainted skins for Wrench's SF2 Corsairs paks for use in a SF2 Korea War install.  This pak contains 5 different Corsair versions and 25 unit skins.
    You must have Wrench's sf2_kaw_corsairs file installed for the AU-1 an F4U-5NL.  You must have his sf2_kaw-f4u4_corsairs_pak installed for the F4U-4 and F4U-4B.  And you must have his sf2_kaw_f4u5-corsair_pak for the F4U-5. His original readme(s) are in the Original Readme's Folder.

    The skins are in .jpg format at 2048 x 2048 pixels each.
    -----------------------------------------------------------------------
    Thanks and credit go to (from Wrench's original read me file).
    "TMF/Mod Mafia for ALL these Corsairs: with special thanks to BPAO - we miss you Oli!
    and also to Crusader, Mod Mafia Leader (xTMF)
    RussoUK for the engine sound, borrowed from the P-47N
    Me, for alot of the skins and decals and some ini reworking and assembling the package, and bottle washing.
    More Skins by CrazyHorseB34 (thanks man!)."
    ---
    And to Geary - for new lines, rivets, repaints, conversions, ini tweaks, a few decals, adding .50 cal painted gun ports to F4U-4, etc...
    But, especially to Wrench for all the work he did in putting the original Corsair paks together.

    ---------- Installation Instructions --------------------------
    You might want to back up your old/original skins and/or weapons in case you don't like these.

    INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your SF2 Korea install. Overwrite if asked. Fly.

    Replace the old/original decals with the ones provided.  Most are Wrench's original but some have been changed.
    If you don't have the correct weapons, look in the many weapons packs available here at CombatAce.

    -----------------------------------------------
    I've included a repainted drop tanks to match their aircraft skin color. 
    -------------------------------------------------

    If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's work or property or claim it as my own.  Please contact me to correct any error.
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  Otherwise, please give credit to those due it. 
    If you find any problems with it, please PM me.  If you improve it, please share. 

    Geary
     
     
     

    93 downloads

       (0 reviews)

    0 comments

    Updated

  10. TW RF-51D for Korean War

    TW RF-51D for Korean War
     
    This are a skin and aircraft files to create a RF-51D using the TW P-51D.
     
    You must have the P-51D from the Strike Fighters 2 Expansion Pack 1 for this mod to work.
     
    (If you don't have the TW P-51D and want a RF-51D for your SF2 Korean War install, there's a great one by FastCargo/Wrench in the downloads section.)
     
    The cameras are 2D and are painted on the skin. The skin texture files are in .jpg format at 1024 x 1024 pixels.
     
    Thanks and credit go to:
    Third Wire - for the P-51D model.
    Wrench - for the decals and RF-51D original skin I modified.
    Me - for creating/painting on the 2D camera's; modifiying Wrench's skin to this plane.
    ? - I'm not sure who created the 108 gallon drop tanks. They've been around for many years. Thanks to the unknown creator. (Consensus is the F-51D used the 108 gallon drop tanks more than the WWII 75 gallon tanks.)
     

    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your SF2 Korea install. Fly.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
     
    If you find any problems with it, please PM me. If you improve it, please share.
     
    Geary

    90 downloads

       (1 review)

    0 comments

    Submitted

  11. SF2 YAP F-100F Fuel Probe Shadow Line Fix

    SF2 YAP F-100F Fuel Probe Shadow Line Fix
     
    This mod is for the payware YAP F-100F Super Sabre.
     
    Thanks and Credit go to:
     
    yakarov79 - for creating this new, shadow free fuel probe. Thank you Jarek.
     
    FastCargo - for creating the FakePilot.
     

    This mod uses the Fake Pilot method to fix the YAP F-100F shadow line.
     
    A .psd file is included if you wish to repaint the fuel probe. It is currently painted in the USAF SEA paint scheme.
     
    This will not work in SF1.
     
     
     
    Installation:
    Drop the F-100F and FakePilot folders into your installation's Pilot Folder.
    Back up your F-100F_Data.ini file in your aircraft F-100F plane folder and overwrite it with the provided F-100F_Data.ini file. (This file hides the old/original fuel probe and adds the new fuel probe to the plane.)
     
    That's it. The fuel probe shadow line is gone.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
     
    I'm releasing this under the Combat Ace Fair Use Agreement.
     
    If you find any problems with it, please PM me.
     

    Geary

    88 downloads

       (1 review)

    0 comments

    Submitted

  12. SF1 F9F-5 & 5P Panther Korean War Skins Pak

    SF1 F9F-5 & F9F-5P Panther Skins.
     
    For those of us that still fly SF1, who still enjoy the old Korean War mod and who would like some updated F9F-5/5P Panther skins for the Korean theatre.
     
    This download contains the Fighter/Bomber and Photo Reconnaissance aircraft as well as skins.
     

    Because I used Wrench's SF2 F9F-2 decals, you may notice the BuNums referencing the aircraft as F9F-2 models instead of F9F-5 models. Change them if you wish/can.
     

    Most of these old SF1 skins didn't use the decal system. They do now.
     

    I only created a template and repainted over the old skins. The model is a bit old and has some quirks with the paint and decals. You will notice some paint streaks and line deformation caused by these quirks.
     
    Thanks and credit go to:
     
    Pasko/Column5/Gramps/Major Lee/Marcfighters - for the F9F-5 & F9F-5P models uploaded by Guest.
     
    Wrench - for the decals from the Wrench/Bobrock SF2 Korean War Era F9F-2 Panther Pak.
     
    Creature - for the hook, canopy folding wings fix.
     
    Geary - for template, paints, repaints, etc...
     
    MultiUnknownSources - for the weapons and pilot.
     

    If you wish to paint your own skins, the template is available for the asking. Just PM me. It is in .psd format.
     
    These skins are in .bmp format and were created at 1024 pixels. They are 3MB each but can be downsized for those of you who can't use them this large.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your SF1 Korea install. If you don't already have the weapon information in your weapondata.ini file, add it. Run the SF1 Weapons Editor. Fly.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
     
    If you find any problems with it, please PM me. If you improve it, please share.
     

    Geary

    41 downloads

       (1 review)

    0 comments

    Submitted

  13. SF1 P-51D ETO Aircraft and Skins

    SF1 P-51D ETO Aircraft and Skins
     
    For those of us that still fly SF1 and noticed there were very few P-51D ETO skins that use the decal system:
     
    3 skins for Wolf257's P-51D.
     
    343rd FS, 55th FG.
    363rd FS, 357th FG.
    487th FS. 352nd FG.
     
    There is no nose art with these skins.
     

    Thanks and credit go to:
    Wolf257 - for the P-51D model.
    Pappychksix - for the 343rd skin I repainted from his SF1 Evelyn skin.
    Amariani - for the decals from his SF2 P-51D ETO skins.
    Geary - for template, paints, repaints, etc...
    I don't know who created the WW II pilot or the drop tanks. They've been around since the dinosaurs. But thanks to those creators.
     
    If you wish to paint your own skins, the template is available for the asking. Just PM me. It is in .psd format.
     
    These skins are in .bmp format and were created at 2048 pixels. They are 12MB each but can be downsized for those of you who can't use them this large.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your SF1 ETO install. If you don't already have the weapon information in your weapondata.ini file, add it. Run the SF1 Weapons Editor. Fly.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
     
    If you find any problems with it, please PM me. If you improve it, please share.
     

    Geary

    33 downloads

       (1 review)

    0 comments

    Submitted

  14. RF-86A Korean War Project Ashtray

    Korean War RF-86A for SF2 and SF1
    RF-86A Sabre of the Korean War Poject Ashtray.
     
    There is one zipped file for SF2 and one for SF1 in this download package.
     
    Information on this project is and it's predecessor, Project Honeybucket, is schetchy. As gun removal seems to have been personal choice and changed throughout these projects I chose to leave the top four guns inplace as described at one of the few sites with information. Remove any or all guns as you desire.
     
    Credit and Thanks to:
    Zur - for the F-86 model and drop tanks.
    yakarov79 - for the fake pilot 3D cameras, photos and project info.
    Diego - for Korean War era pilot.
    Wrench - for the decals, original skin I adapted/repainted and cockpit mod for the F-86A.
    ravenclaw007 - for his F-86 template I borrowed text and other details from.
    regula50 - for the correct plane numbers and project info.
    FastCargo - for the Fake Pilot.
    Geary - for new panel lines, rivets, paint, ini modifications, etc...
     
    The cameras on the SF2 model are 3D .lods using .jpg format texture.
    As the .lod's and .jpg's aren't recognized by SF1, those cameras are painted on.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your Korean War install. If you don't already have the weapon information in your weapondata.ini file, add it. Run the SF1 Weapons Editor. Fly.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
     
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
     
    Geary

    155 downloads

       (1 review)

    2 comments

    Updated

  15. Korean War RF-51D Photo-Recon

    Korean War RF-51D for SF1
     
    For those of us that still fly SF1, who still enjoy the old Korean War mod and who don't have this photo-recon plane.
    (Those round black circular things on the left mid/tail section of the plane are supposed to be there. They are the cameras and they are placed in the generally correct areas.)
    (This should work fine in SF2. But Wrench has an SF2 RF-51D for Korea in the download section for those that want one for SF2.)
    Credit and Thanks to:
    Wolf257 - for the P-51D model.
    Diego - for the Korean War era pilot.
    ErikGen - for the F-80 seat.
    Wrench - for the decals and the original skin I adapted/repainted from his SF2 RF-51D.
    ? - for the P-51 108 gallon drop tank. (Sorry, I don't know who created this but I think it came in an old weapons pack.)
    ? - I don't know who created the updated cockpit for this model/.lod but God Bless you.
    * - The many who created skins, mods, etc for Wolf257's P-51D that I've borrowed from or was inspired by.
    Geary - for the new lines, rivets, paint, cameras, new drop tank skin, etc...
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's work or property or claim it as my own. Please contact me to correct any error.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the folders into their corresponding folders in your Korean War install. If you don't already have the weapon information in your weapondata.ini file, add it. Run the SF1 Weapons Editor. Fly.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use but please give credit to those due it.
     
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
     

    Geary

    66 downloads

       (2 reviews)

    1 comment

    Submitted

  16. MD-450 Ouragan Template Redrawn Lines & Rivets

    Semi-HiRez 1024 Templates for Pasko's MD-450 Ouragan
     
    For SF1 and SF2.
     

    Based on Wrench's original MD-450 template
    .
     
    Redrawn Panel Lines and Rivets at 1024 pixels in layered PSD format. You must have a program that recognizes and works with PSD layers to work with this template. Two free programs, Gimp and Paint.net work with PSD layers.
     

    Opacity adjustable for both lines and rivets layers.
     

    It's and old plane and has a couple of lod inconsistencies such as the lower right aileron isn't mapped correctly but it's the only Ourgan we have.
     

    I have no references for this plane so there's not a lot of detail in the templates.
     

    Add your own paint, dirt and weathering.
     

    I've left Wrench's original skins in the template to make it easier to repaint them.
     

    Thanks to Pasko for this great little plane and to Wrench for the original template
     
    .
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
     
    If you find any problems with it, please PM me. If you improve it please share with the community.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     

    Geary

    66 downloads

       (2 reviews)

    0 comments

    Submitted

  17. AT-6G Mosquito Fictional SEA Skin

    Fictional AT-6G Mosquito skin for SF1 & SF2.
    This is a What If SEA skin for Wrench's AT-6G Mosquito mod found here: http://combatace.com/files/file/9082-at-6g-texan-mosquito-fac/
    It is Wrench's mod to Bunyap's T-6 Texan. You will need this file for the plane, weapons and decal numbers.

    Bunyap's T-6 Texan is a bit old and has a few malfunctions such as a shadow line and no texture mapping for the tires, etc. But it looks good in the air.
    If you would like my .psd layer mods to Wrench's template, PM me.
     
    Thanks to Bunyap for the plane and Wrench for the Mosquito mod and templates.
    Any questions, please ask.
    Enjoy,
    Geary

    53 downloads

       (1 review)

    0 comments

    Submitted

  18. TW_HiRez_SuperMystereB2_Templates

    TW Super Mystere B2 / Sa'ar Hi-Rez Templates for SF2 / SF1.
     
    Templates for the ThirdWire Super Mystere B2 / Sa'ar at 2048 pixels in PSD format. You must have a software program that reads and works with PSD layers. These were built in Photoshop CC 2015. Gimp and Paint.net are two free programs that work with PSD layers.
     

    Opacity is adjustable for all layers.
     

    These can be saved in JPG format for SF2 or BMP format for SF1.
     

    Add your own paint, dirt and weathering.
     

    I have no references for this plane so there's not a lot of detail in the templates. I just redrew the lines and rivets from the existing Super Mystere B2 skins.
     

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
     
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
     
     
    Geary

    52 downloads

       (5 reviews)

    0 comments

    Submitted

  19. TW_MystereIVA_HiRez_Templates

    TW Mystere IVA Hi-Rez Templates for SF2 / SF1.
     
    Templates for the ThirdWire Mystere IVA at 2048 pixels in PSD format. You must have a software program that reads and works with PSD layers. These were built in Photoshop CC 2015. Gimp and Paint.net are two free programs that work with PSD layers.
    Opacity is adjustable for all layers.
     

    These can be saved in JPG format for SF2 or BMP format for SF1.
     
    Add your own paint, dirt and weathering.
     

    I have no references for this plane so there's not a lot of detail in the templates. I just redrew the lines and rivets from the existing Mystere IVA skins.
     

    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
     
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
     
     
    Geary

    44 downloads

       (2 reviews)

    0 comments

    Updated

  20. La-15_Fantail_Templates

    Semi-HiRez Templates for Pasko and Column5's La-15 Fantail
     
    For SF1 and SF2.
     
    Redrawn Panel Lines and Rivets at 1024 pixels in layered PSD format. You must have a program that recognizes and works with PSD layers to work with this template. Two free programs, Gimp and Paint.net work with PSD layers.
    Opacity adjustable for both lines and rivets layers.
     
    It's and old plane and has a couple of lod inconsistencies but it's the only Fantail we have.
     
    I have no references for this plane so there's not a lot of detail in the templates
    .
    Add your own paint, dirt and weathering.
     
    Thanks to Pasko and Column5 for this early soviet jet.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
    Geary

    31 downloads

       (2 reviews)

    0 comments

    Submitted

  21. 3 Fictional Sabre/Fury Planes for SF1

    2 Fictional Sabres and 1 Fictional Fury for SF1
     
    You will need columns5's FJ-3M Fury from here: http://combatace.com/files/file/525-fj-3m-fury-addon/
     
    This pack contains files to convert the FJ-3M Fury to:
     
    1 - A USN FJ-3B Attack Fury, a fictionalized version of the real USN FJ-4B Fury ground attack variant of the FJ-4 Fury - capable of carrying AGM-12B Bulpup Air-to-Ground missiles; Aero 7D_FFAR Pods; AIM-9B Air-to-Air Missles; various and sundry bombs, rocketpods, etc....
     
    2 - An F-86B Attack Sabre. The USAF version of the above USN FJ-3B ground attack jet.
     
    3 - An F-86G Sabre. The USAF version of the FJ-3M - 4x20mm nose guns and 2xAIM9B Air-to-Air missiles.
     
    You will need to install the FJ-3M for each of the above planes you want to install. If you want to install all three planes, you will need to install the FJ-3M three times.
     
     
    INSTALLATION:
    Install the FJ-3M once and rename the installed FJ-3M folder to FJ-3B.
     
    Install another FJ-3M and rename that folder to F-86B.
    Install one more FJ-3M and rename that folder to F-86G.
    Drop the corresponding folders from this pack into the newly created FJ-3B, F-86B and F-86G folders and overwrite the old files when asked.
     
     
    To add extra pylons for the FJ-3B and F-86B I used ravenclaw_007's execellent F-86 Bomb Rack weapon from his Canadair CL-13B Mk6 Sabre early or Canadair CL-13B Mk6 Sabre late.
    They can be found here: http://combatace.com/files/file/7387-canadair-cl-13b-mk6-sabre-late/ and here: http://combatace.com/files/file/7384-canadair-cl-13b-mk6-sabre-early/. Either one will do as they both have the F-86 Bomb Rack.
    They are also both execllent planes and if you haven't flown them you are missing out on two of the best F-86 versions available at CA.
     
     
    You must install the bomb rack as a weapon. The necessary lod's, ini's, weapon data entries and instructions are in ravenclaw_007's download.
     
     
    You will need to ensure you have the necessary weapons, ie. AGM-12B, AIM-9B, Aero 7D_FFAR Pod, etc. Look in the *_loadout.ini files to see what weapons are needed. Most are found in common weapons packs or are already default weapons.
     
     
    Included in this pack are the relevant .ini files to convert the FJ3M. Also included are an FJ-3B skin for VA-146, a real FJ-4B unit and two skins for the the F-86B/G models. VA-146 skin was created by me. The F-86 SEA skin was inspired by Dave's/Wrench's SEA F-86 skin.
     
     
    Decals are, for the most part, default. They will depend on which SF1 install you put these planes in. You may end up changing some of the numbers.
     
     
    Thanks to Dave "USAFMTL" Slavens for the idea. Years ago he created an FJ-4B fury from a FJ-3M. I found it at AVSIM while browsing the ancient Strike Fighters section.
    Thanks to ravenclaw_007 for the F-86 Bomb Rack that makes the 'B models possible.
    Thanks to Zur and column5 for the FJ-3M Fury.
    And thanks to all those that have inspired and coached me to be able to do this.
     
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
    If you find any problems with this release, please PM me. If you improve it, please PM me a copy. Any questions, PM me.
     
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
     
    Geary

    53 downloads

       (1 review)

    0 comments

    Updated

  22. FJ-3M_Fury_Pack_1_for_SF1

    FJ-3M Fury Skins Pack 1 for SF1
     
    You will need the columns5's FJ-3M Fury mod to Zur's F-86 Sabre for these skins here:
    http://combatace.com/files/file/525-fj-3m-fury-addon/
     
    Five FJ-3M Fury clean skins:
     
    1 = VF84 - FJ-3M - Repaint of pappychksix/Wrench's VF-84 skin.
    1 = VMF232 - FJ-3M - Semi-Fictional Repaint of David "USAFMTL" Slavens' FJ-4B DBF skin.
    1 = VMF312- FJ-3M - Repaint of pappychksix/Wrench's VMF-312 skin.
    1 = USN Blue Camo - Fictional - FJ-3M - Repaint of Mitch's F-86F_German skin.
    1 = VMF122 - FJ-2 - Semi Fictional Repaint of VMF122 standalone skin I have but I don't know where I got it or who the original author is. If anyone know's whose skin this is, please tell me so I can credit them. VMF-122 actually used this skin on their FJ-3's. I wanted an FJ-2 Fury to compliment the Navy Blue Phantoms, Banshees, Skyraiders, etc. of the Korean War era. So I downgraded a FJ-3M to an FJ-2.
     
    DECALS: These skins use a mixture of default and other Fury skin decals. As I can't release other peoples decals without their consent, you will need to find some of the decals in other Fury releases. PM me if you need help with these.
     
    For the VF-84 and VMF-312 skins, use the decals from pappychksix's Fury Package here:
    http://combatace.com/files/file/2255-fury-package/ ... OR ... Wrench's SF2 FJ-3M Package here: http://combatace.com/files/file/12233-fj-3m-fury-by-zur-and-co-for-sf2/
     
    For the VMF232 skin I have NO idea where I got the decals to use for this skin. But probably from pappychksix/Wrench's Fury packs. Choose your own.
     
    For the USN Blue Camo fictional skin, use which ever declas you like. I used TW default decals for my skin and probably some from pappychksix/Wrench's Fury packs.
     
    For the VMF122 skin ... I have a stand alone VMF122 skin I repainted. I think I used the decals from this original skin. I used VMF232 numbers, but you can use whichever you wish. The problem is the original skin doesn't have a readme and I can't find where I got it from. Anyone who know's the original author please pm me where it can be found so I can post that information here.
     
    These skins are fairly clean as I'm not very good at weathering so feel free to add your own dirt. To repaint some of these skins such as the VF-84, VMF232 and VMF312, I had to paint over the existing paint to eliminate the old panel lines and rivets. Unfortunately, this means I also painted over the great weathering on these skins. I apologize to the artists of the original skins.
     
    They were made using my F-86 Sabre/FJ-3 Fury templates. They are in .bmp format, 2048x2048 for SF1 but they might work in SF2 with a bit of tweaking. You can of course make them smaller if your computer can't handle the large size. If you have trouble making them smaller, pm me and I'll see what I can do.
     
     
    There is included a clean drop tank skin for those that wish to use it. Just drop it into your existing Tank_F86 weapons folder. Overwrite when asked. Also a clean skin for the FJ-2 Navy Blue VMF-122 Tank-FJ2.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skins folders into your FJ-3M aircraft folder. If you want the blue FJ-2 VMF-122 drop tank, you will have to add the Weapondata entry to your install's weapondata.ini and run the weapon editor. Drop the Tank_FJ2.bmp and Tank_FJ2.lod into your weapons folder.
     
    They were inspired by:
     
    Dave
    Wrench
    pappychksix
    column5
    paulopanz
    ravenclaw_007
    Tazkiller
    DanW
    howling1
    suhsjake
    Mitch
    Zur
    and MANY others who've contributed skins and mods to this wonderful plane.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
     
    If you find any problems with this release, please PM me. If you improve it, please PM me a copy.
    Geary

    52 downloads

       (1 review)

    0 comments

    Submitted

  23. F-86_Sabre_Pack_1_for_SF1

    F-86 Sabre Skins Pack 1 for SF1
    Four F-86 Sabre clean skins:
    1 = 3-tone Desert Camo - Fictional
    1 = 2-tone Desert Camo - Fictional
    1 = 3-tone SEA Camo - Semi-Fictional
    1 = Silver - Non-Fictional
     
    These skins are fairly clean as I'm not very good at weathering so feel free to add your own dirt.
     
    They were made using my F-86 Sabre/FJ-3 Fury templates. They are in .bmp format for SF1 but they might work in SF2 with a bit of tweaking.
     
    They use a mixture of default and other Sabre/Fury skin decals. As I can't release other peoples decals without their consent, you will need to find some of the decals in other Sabre/Fury releases.
     
    There is included a clean skin for those that wish to use it. Just drop it into your existing Tank_F86 weapons folder. Overwrite when asked.
     
    INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skins folders into your F-86 aircraft folder.
     
    They were inspired by:
     
    Dave
    Wrench
    PappyChkSix
    Column5
    paulopanz
    ravenclaw_007
    Tazkiller
    DanW
    howling1
    Zur
     
    and MANY others who've contributed skins to this wonderful plane.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
    I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
     
    If you find any problems with this release, please PM me. If you improve it, please PM me a copy.
    Geary

    79 downloads

       (3 reviews)

    0 comments

    Submitted

  24. F-106A Templates for Pasko and Column5's Delta Dart

    Templates for Pasko's and Column5's F-106A Delta Dart.
     
    Original SF1 aircraft can be obtained here: http://combatace.com/files/file/5210-f-106a-delta-dart/.
     
    SF2 aircraft conversion can be obtained here: http://combatace.com/files/file/14246-f-106a-delta-dart-for-sf2/.
     
    These are .psd files with redrawn panel lines and rivets. You will need a paint prgroam such as Photoshop or Gimp that can read .psd files. You also need to know how to work with layers.
     
    The lines and rivets are painted in pure black with a second offset underlayer in pure white. The opacity for all is adjustable.
     
    The Wing.psd is mirrorred. It serves both left and right wings.
     
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
     
    Thanks to Pasko and Column5 for this great airplane.
     
    And thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
    Enjoy.

    44 downloads

       (2 reviews)

    0 comments

    Submitted

  25. Templates for Veltro2k's F-102A Delta Dagger

    Templates for Veltro2K's F-102A Delta Dagger.
    Original aircraft can be obtained here: http://combatace.com/files/file/9446-f-102a-delta-dagger/.
    These are .psd files with redrawn panel lines and rivets. You will need a paint program such as Photoshop or Gimp that can read .psd files. You also need an know how to work with layers.
    If you find any problems with it, please PM me. If you improve it, please PM me a copy.
     
    Thanks to Veltro2K for this great airplane.
     
    And thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.
     
    If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
     
    Enjoy.
     
    Geary

    30 downloads

       (1 review)

    0 comments

    Submitted

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..