-
Content count
583 -
Joined
-
Last visited
-
Days Won
26
Posts posted by denissoliveira
-
-
I need the manual and photos of SEM instruments, the SE I have, but the SEM have little, want a more detailed cockpit SEM
Already complete cockpit Etendard IVM, and starting the SE, now the SEM do not have much details, pictures of low resolution only
-
I'm also building a cockpit to SE and SEM, you have documentation of SEM?
-
How do I move? I do not have permission to create topic in forum knowledge base.
-
If this wondering why not create in the forum of knowledge Base?I do not have permission to create topic in the forum of knowledge Base.
-
The flaps are animation, decided to increase the angle and only displaying the last stage. SolvedThe fuelflow, there were 2 instruments, for this reason he did not work, now it's ok!Question, the fuelflow is in hours minutes of consumption?
-
jeanba, could post in chh Forum about images and documentation from the cockpit of the SEM(Super Etendard modernized)? I need the weapons too SE (Super Etendard), sits just below the radar, on the right side.
FRPignon - contact by email usually takes, but if you can help me ...
-
I thank you !Now I need the SEM - Super Etendard modernized
-
Yes
I added a 4 digit individual 10000feet, works well, thank you.on fuel, I do not know the scale in data.ini, not where you configure. but the instrument put kg. I will test this configuration.About flaps (my last question) as I do so only move on the last stage (landing) and do not move at takeoff? -
Construction cockpit Dassault-Breguet Super Étendard - need documents-I need help with photos and documentation to end panel construction (cockpit) Super Étendard and Super Étendard Modernisé.I need Manuel and photos in high resolution, who can help me.(I can not create knowledge forum)
- 2
-
This ?[FuelFlowIndicator]Type = FUEL_FLOW_INDICATORCounterNodeFormat = counter_FF_% dMovementType = ANALOG_COUNTERValueUnit = KGSet[01].Position=0.0Set[01].Value=0.0Set[02].Position=360.0Set[02].Value=1.0SmoothCounter = TRUE
-
Thanks, these work now.to the altimeter, created a second with different scale, only 3 digits, 4 not works.[Altimeter](ALTI_dig_3,2, 1 and needle , for 10000, 1000, 100 Feet)Type=PRESSURE_ALTIMETER_3NodeName=NeedleAlti100CounterNodeFormat=ALTI_dig_%dMovementType=ROTATION_XValueUnit=FEETSet[01].Position=0.0Set[01].Value=0.0Set[02].Position=360.0Set[02].Value=100.0SmoothCounter=FALSE[Altimeter2] (and ALTI_dig2_1, for 10 FEET)Type=PRESSURE_ALTIMETER_3CounterNodeFormat=ALTI_dig2_%dMovementType=ROTATION_XValueUnit=FEETSet[01].Position=0.0Set[01].Value=0.0Set[02].Position=360.0Set[02].Value=10.0SmoothCounter=TRUEso it works well!Now, the FUEL_FLOW_INDICATOR does not work, my unit is in KG[FuelFlowIndicator]Type=FUEL_FLOW_INDICATORCounterNodeFormat=counter_FF_%dMovementType=ANALOG_COUNTERValueUnit=KGSmoothCounter=TRUE -
I have problem in rotation with the selection of weapons, it does not rotate on the same axis, this is in degrees or meters.And problem with instruments with 4 digits.[FuelFlowIndicator]Type=FUEL_FLOW_INDICATORCounterNodeFormat=counter_FF_%dMovementType=ANALOG_COUNTERValueUnit=KGSmoothCounter=TRUE[Altimeter2]Type=PRESSURE_ALTIMETER_3NodeName=NeedleAlti100CounterNodeFormat=ALTI_dig_%dMovementType=ROTATION_XValueUnit=FEETSet[01].Position=0.0Set[01].Value=0.0Set[02].Position=360.0Set[02].Value=10.0SmoothCounter=TRUE -
Need help,I need an altimeter with 10000, 1000, 100 and 10,use digit ALTI_dig_%d,%d equal to 3.2 and 1, if I put a %d equal to 4 and put the Set [02] .Value = 100.0 with the value 10.0 will work?example: the display digit appears 1/1/1/89 (11189 ft),%d = 4/3/2/1And FUEL_FLOW_INDICATOR with four digits
-
This does not work, it does not move[gearBotao]Type=LANDING_GEAR_INDICATORNodeName=GearLeverMovementType=ROTATION_XItemNumber=1Set[01].Position=0.0Set[01].Value=0Set[02].Position=35Set[02].Value=1
-
Value Unit = there is a list of this?Is there any documentation to download?
-
Thank you very much !!!I will use the existing cockpit to find out more!Sorry for the topic in the wrong place.as toPOSITION_XYZ - the first define what position? position 0 and position 1 (with distacia value of the initial position?)and ANIMATION - use animation in the cockpit and set the start trigger button?
-
I'm starting cockpit construction and need this information if anyone has any documentation, a list of these types.I need this information, the list of These types:Type = is how many? there list?MovementType = how many are? there list?ValueUnit = how many are? there list?CounterNodeFormat = how many are? there list?ItemNumber = que this is associated?
- 1
-
-
-
He did not authorize, but he is not the author, I contacted the real author to authorize, that is Tim conrad
DNRDESIGN is only a thief who takes the models of other
- 2
-
The A-29 was withdrawn by reason of having beenremapeou, not right, received this model and was allowed to publish, anyone know who is the real author of the model?
-
IAI PACK Argentine Air Force
IAI FINGER A Argentine Air Force (2.0)
Install - Need Update July 2012 and DLC Mirage IIIO
IAI Finger is a jet fighter and bomber Mach 2.2 used by the Air Force Argentina .
Finger is the name of a modernization program carried out at the
planes made ??in Israel IAI Dagger possessed the Argentina Republic .Modelo - TK (Mirage IIIO)
Texture - Denis Oliveira
Template Texture - Ludo.m54
3D mod - Denis Oliveira
Decals - Denis Oliveira
Modified TW Nesher Cockpit tiles and Avioncs ini - CoupiDagger B
The remaining Israeli Nesher aircrafts were refurbished and exported to the Argentine Air Force in two batches, 26 in 1978 and 13 in 1980, under the name Dagger, comprising 35 Dagger A single-seat fighters and 4 Dagger B two-seat trainers.
They formed a new unit, 6th Air Group, and were immediately enlisted with the help of the 8th Air Group (Mirage IIIEA) and the Peruvian Air Force, already a user of the Mirage 5, due to the escalating crisis with Chile of that year.
During the 1982 Falklands War, they were deployed to the southern naval airbase of Río Grande, Tierra del Fuego, and an airfield in Puerto San Julián and despite the distance to their targets and lack of aerial refueling capability, managed to make 153 sorties against both ground and naval targets on the 45 days of operations. In the last role, they damaged HMS Antrim, Brilliant, Broadsword, Ardent, Arrow and Plymouth. Eleven Daggers were lost in combat (nine by AIM-9L Sidewinders fired from Sea Harriers and two by surface to air missiles).
In the 1979 contract with IAI, the Argentine Air Force stipulated that the Daggers would be equipped with new avionics and HUD systems to take them to the Kfir C.2 (and beyond in some subsystems) standard. The program, named Finger, was underway in 1982 when the Falklands War broke out. With the war over, as some of these systems were made by the British Marconi Electronic Systems, they needed to be replaced after an arms embargo was imposed by the UK. The replacement of such systems took the planes to the final Finger IIIB standard mainly by replacing the British equipment with French-built Thomson-CSF.
Texture Temp by Ludo.m54
Texture: PauloPanz
Decals: PauloPanz
Data.ini: Coupi
3D mod: Denis Oliveira
-
Submitter
-
Submitted07/09/2016
-
Category
- 3
-
-
IAI Nesher T
IAI Nesher T
The Israel Aircraft Industries Nesher (Hebrew: ?, "Vulture" - often mistranslated as "Eagle") is the Israeli version of the Dassault Mirage 5 multi-role fighter aircraft. Most were later sold to the Argentine Air Force as Daggers, and later upgraded as Fingers.
-Design and development
Israel had to replace more than 60 aircraft lost during the Six Day War and the War of Attrition which followed. Before the war, Israel began co-development with Dassault to build the Mirage 5 and it was eventually built by Israel and named Raam in Hebrew (thunder).Dassault Aviation had developed the Mirage 5 at the request of the Israelis, who were the main foreign customers of the Mirage III. The Israeli Air Force (IAF) wanted the next version to have less all-weather capability in exchange for improved ordnance carrying capacity and range as the weather in the Middle East is mostly clear.
In January 1969, the French government arms embargo on Israel (in response to the 1968 Israeli raid on Lebanon) prevented the first 30 Mirage 5 aircraft (which were already paid for by Israel) plus optional 20 from being delivered and cut off support for the existing Mirage IIICJ fleet.
This was a setback for the Israeli Air Force, who needed the new Mirage to compensate for the losses of the Six Day War and was still using the Mirage IIIC. Israel then decided to produce the (Raam A and B project) airframes as it had the necessary plans, although Israel did not officially obtain a manufacturing license.
Officially, Israel built the aircraft after obtaining a complete set of drawings. However, some sources claim Israel received 50 Mirage 5s in crates from French Air Force (AdA), while the AdA took over the 50 aircraft originally intended for Israel.
Production began in 1969 with the first empty airframes with no weapons, electronics, seat, or engine included delivered directly from Dassault Aviation. The first Raam A was delivered in May, 1971. In November, 1971 the plane was renamed Nesher.
The Neshers' airframe was identical to the Mirage 5, but there was an extensive refitting of Israeli avionics, a Martin-Baker zero-zero ejection seat, and improved provisions for a wider range of AAMs (Air-to-Air Missiles), including the Israeli Shafrir heat-seeking missile. Fifty-one Nesher fighters (Nesher S) and ten Nesher two-seat trainers (Nesher T) were built in all.
The Nesher had simpler avionics than the Mirage IIIC but was slightly less maneuverable. However, it had longer range and bigger payload. The reduced maneuverability did not prevent the Nesher from performing well in air combat during the Yom Kippur war.
Nesher production was phased out from 1978 to make way for an improved Mirage derivative that had been planned in parallel, in which the Atar engine was replaced by an Israeli-built General Electric J79 engine, the engine used on the American Lockheed F-104 Starfighter and McDonnell Douglas F-4 Phantom II fighters. The result was the IAI Kfir.
-Operational
Israeli Nesher over the Golan Heights during the Yom Kippur War
The first Nesher prototype flew in September 1969, with production deliveries to the IAF beginning in May 1971, ending in February 1974. These aircraft performed well during the 1973 Yom Kippur War, claiming over a hundred kills.Install: Strike Fighters Israel or Strike Fighters merge.
Texture: TK, Denis Oliveira
Decals: Coupi
Data.ini: Coupi
3D mod: Denis Oliveira
-
Submitter
-
Submitted07/09/2016
-
Category
- 1
-
-
Mirage 5 Peruvian Air Force
Mirage 5 Package
Need DLC Mirage 5BA.
The Dassault Mirage III is a family of single-seat, single-engine, fighter aircraft produced by Dassault Aviation for the French Air Force and widely exported. Prominent operators included Australia, Argentina, South Africa and Israel, as well as a number of nonaligned nations. Though an older design, the second generation fighter is still a fairly maneuverable aircraft and an effective opponent in close range dogfighting. In French service it was armed with air-to-ground ordnance or R.550 Magic air-to-air missiles.
The versatility of the design enabled production of trainer, reconnaissance and ground-attack versions as well as the Dassault Mirage 5, Dassault Mirage IIIV and Atlas Cheetah variants. A Mirage III was the first European combat aircraft to exceed a speed of Mach 2 in horizontal flight.
Mirage 5DP-4
Mirage 5P-4exture Temp by Ludo.m54
Texture: Tk,Denis Oliveira, PauloPanz
Decals: Coupi
Data.ini: Coupi
3D mod: Denis Oliveira
UserList and Decals: paulopanz
-
Submitter
-
Submitted07/09/2016
-
Category
- 2
-
Construction cockpit Super Étendard - need documents
in Thirdwire: Strike Fighters 2 Series - Mods & Skinning Discussion
Posted · Edited by denissoliveira
Just need to know what would be the empty space, which instrument had there?
I already have the SE documentation, but would this resolution photo for SE?