1Patriot-of-many

What head or eye tracker are you guys using with Win10 and SF2?

What your gov't did to the arrow project was totally insane. I've read books on it and have the movie. You could've had quite a GIANT industry in aviation. Very sad.

Okay dinking around and searching for strike fighters 2 planes sinking into carrier deck got me to CollisionMesh=Flight Deck Just that little change in the carrier data.ini did the trick!!!!!! At least for Modern Warfare Korea. Now to try MWT. Yeehaw!

"Additionally, if you have a merged install with SF2V, SF2E, and SF2NA, you can add F-8's and A-7's to the stock campaigns and a new 1978 campaign with A-7's, F-15's, HarrierGR3's, F-14's, and A-10's as well." How do I add these aircraft particularly the f-8 and A7, I'm not seeing them and don't see the others available either.

That's strange I distinctly remember them working I believe on my win7 a few years ago. But I could be wrong. I'll have to fire it up and check. There must be a fix? The mod works fine except for the navy planes flying off the carrier. Surely someone that does these mods could figure out why the problem there of plane sinking into the carrier and wingmen diving for the sea on the carrier deck?

I believe I followed all instructions, The Navy planes either fall through the deck and explode and wingmen tilt 45 degress and the drive into the ocean, What Have I down wrong?

The E-2C-R3.LOD for the E-2C "HawkEye" from Skunkworks I tried getting it from the skunkworks and they never replied back. I want to run The Modern warfare series mods(Korea and Tawain) by Spectre. Anyone have them? Please message me here or reply on this thread thanks!

I don't know guys. All I know is the instructions for the mod say the lod is required. I asked for access from the owner, never heard a reply. The mod was done by Spectre. I don't plan on doing anything commercially, I'm not a pirate. Just want to play the mods put up here.

I give up, I've tried installing this 6 times. The campaign doesn't show up in the list. I've tried manually putting the info in the options.ini to no avail. Directions need to be clearer, especially adding all the stuff before the mod. 1. Do you add the mod first, then put all the other stuff like Ticonderoga and the others in and over write? I added all the other stuff first overrode and then put the main mod in. 2. Am I supposed to delete the objects file first or leave everything to be overwritten?

Cool, Yeah I use a separate mod folder for each one. Off topic but since you replied, how do I load the same weapons on all my wingmen at the same time in the loading screen? I know someone told me how before but can't remember.

Which one of the SF2.exe's should I use as the base and should I remove all the files after running it first or just the objects folder? I'm not sure what you mean by clean mod. I have all the SF2.exe's merged. Had this working fine on a nother computer a few years ago. Putting it on a new one. Thanks!

Yep, getting a subscription is well worth it. The mods add many hours to an already fairly good game. Strike fighters 2 for me. Server is a little slow, and I get an error saying I can only download one file at a time, while the file was already downloaded, but otherwise well worth the price.

Tells me the page is not accessible to me, is multiplayer going to be in it?

How do i make American and other allied planes less effective. Even on easy setting, any Russian plane I take off with is eliminated very quickly. I'd like to play some of the Russian planes and live long enough to complete some missions.

Back just to revisit this thread, Just got done reading a book on the F4 phantom II's USAF mig killers 1972-73. Falcon missiles were practically useless, Sparrows were less than 15% fired to hit ratio, and sidewinders slightly less than that. That definitely isn't programmed in when you fly on the North Vietnamese side in the game, but at least you have a fighting chance of breaking missile lock unlike most of the other mods playing the red side. BTW I'm true blue American, just because I like to play on the Red side once in a while doesn't mean I'm a democrat, quite the opposite. Here's some of my toys, minus a couple on another part of the property.

$100 for the whole package is well worth it IMO. Especially with all the mods you can pack on from here. DCS you pay what $50-60 bucks for the basic game and everything costs you $50 a pop here, $50 for a terrain. Plus it's so complicated at least for me, this is the flight sim that keeps on giving and I keep playing, middle of the road complicated. I've got a ton of flight sims, Janes and Microprose were state of the art at the beginning and frankly I still play Janes Fighters anthology now and then. I didn't even know about Strike fighters2 till fairly recently in the big scheme of things. Wish I had. Only thing I wish for is multiplayer to get finished.

Hey guys, I somehow messed up somewhere in installing the Vietnam mods. Neither A6-a or B have the cockpit showing and on the B the cockpit is missing and both planes are black. Any Idea what I'm missing here?

I use a HP Z620 with two cpu's(though Strike fighters 2 obviously doesn't use the second) Xeon E5-2670's@2.6GHZ up to 3.3 boost with a GTX1070 at 1920x1080 Not bad for old school gaming but lacking on unlimited setting especially in Vietnam Strike fighters2. I decided i needed to try NVME which the ZX20 series of workstations doesn't really support. I bought a Z440 for $150 with win 10 already on it. Bought a Team 4 GB NMVE and a cheap PCIE card to mount it on. Bifurcated the slot for 4x4x4x4 copied the os to the NVME. Bought a $300 new GTX3060 running at 3840x2160(yeah I'm a tightwad buying workstations to use) E5-2699v4 @2.2GHZ-3.3GHZ. But then I read you could use an I7 6900K even though it's not advertised by HP. So i grabbed a new one for about $100 and put that in. I went from single frames in unlimited settings in Vietnam to 60 average, 112 high and 21 low with a cheap ugrade in computer generation....Gonna grab another Z440 with a Xeon 1620v4 for my daughter and a GTX3050 so she game decently (big unreal tournament online fan@30years+ old lol). Will be buying another Z440 for my network and putting another I7-6900K in it as well as a NVME HD, and don't know what video card yet as they're insane prices going on now. But anyway point of my post is you can build yourself a cheap budget gaming rig with these workstations that will run everything but the biggest and greatest games.

How do these work? Do I add them to the aircraft file in objects for all the mods?

How do I install it and what Strike fighter2 do I use as a template?