Here you have 12 siver skins, made using Shusjake's temps, generic and for each squadron.
 
Historical serials & loadoutimage tga.
 
Options for NATO 4/5 install (see dedicated readme in nato folder)
 
All credits to DERK who helped me in this job (houdoe!).
 
Enjoy.
 
@paulopanz

Here come "Belgae Gallorum fortissimi" Thunderjets!
 
Using last patch SF-2 You will have each BAF squadron (or smaldeel) letters.Tail art for 1 & 10 Wing.The 9 Wing had not any official tail art (see included refences)
 
Nose art for 1-2-3 Smaldeel
 
2 F-84E + 1 F-84G skins for general use.
 
 
Included new loadout.tga
 
Install as usual.
 
[i hope that someone will make the F-84F serie, too].
 
This is for Kevin and Eric (NATO 5).
 
Enjoy
 
Paulopanz

Redrawn Lines, Rivets, etc.. for the beautiful F-84E/G Thunderjet by RussoUK2004.
It can be used for SF1 or SF2.
This template is a Photoshop .psd file at 2048 pixels. It has redrawn lines, rivets and various bits. It can be reduced for those with low spec computers.
The only skin with this template is USAF Natural Metal / Aluminum.
Add your own paint, dirt, details and weathering.
If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
 
Credit and Thanks to RussoUK2004 for this nifty little jet and Wrench for the colorful skins he's made for it.
 
INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
 
Geary
 

SF2 P-47N Thunderbolt 36th FBS, KAW "What If" Skins Pack       6/22/2019
-For SF2, (Full 5 Merged Reccomended)-
This is a 'What If' skin for the P-47N Thunderbolt by RussoUK. It represents the
36th FBS, 51st FG if said unit had been equipped with Jugs during the Korean War.
It is to be applies to V.2 of Russ's Jug. If you don't have it, You can find
Version 2.0 of Russ' P-47N at the following URL:
https://combatace.com/files/file/13202-p-47n-157z/
The aircraft is painted in "silver lacquer" and carries the same style of tail
markings as seen on their Real Life (tm) F-80C Shooting Stars used in Korea. All
new serial and buzz number decals were created. The serials, while generic in
nature, are correct for the late model P-47Ns. Decal randomization is TRUE.  Let it
be known that the SF2 Date Switch is =NOT= used on this skin*. A new more "chewed
up looking" damage tga is also included. When in-game, on the Loadout Screen's Skin
Selection Dropdown window, you'll see:
36th FBS (What-If, KAW 1950)
Remember, you'll have to change the skin for all members in your flight.
Once upon a time, there was a 1stGen version of this aircraft/skin that I did (mid
2000s???) but it dosen't seem to exist in the CA downloads anymore. So, this is a
full replacement. If any of you End Users (tm) still have it, you are instructed to
delete both the original skin and decals.
As is always reccomended, unzip to a temp folder or your desktop to give easy
access to the rest of this readme for it's install instructions. Might want to give
the "Notes & Other Nonsense" section a once over, as well! :)
*=see 'Notes' for information on how to create a post-war F-47N

Happy Landings!
Wrench
Kevin Stein

In 2003-2004 Poland received 22 MiG-29 aircraft from Germany, including 4 MiG-29GTs (German version of a MiG-29UB 9-51 two-seater). In 2015 the aircraft no. 4105 received a special paintscheme in honor of brigadier general Stanisław Skalski - the top Polish fighter ace of the WW2 and the first Allied fighter ace of the war.
This mod contains the abovementioned special 4105 skin. To install, unpack the zip archive and paste the contents of "to mod folder" folder into your game's mod folder. Read the Knowledge Base for further instructions on installing mods etc.
Credits:
Bazillius for his outstanding MiG-29 skin template and the original MiG-29 9-51 Soulfreak for the MiG-29GT Mariusz Wojciechowski (mariwoj) for the priceless reference material, visit his site for more goodies: http://mig.mariwoj.pl/ As with all my works, you can use any content of this mod as freeware only.
Have fun
Chris

Redrawn Lines, Rivets, etc.. for the Mirage Factory's beautiful little F-84F Thunderstreak.
It can be used for SF1 or SF2.
This template is a .psd file at 4096 pixels. It can be reduced for those with low spec computers.
It was made using Photoshop. It has redrawn lines, rivets and various bits.
I had completed about half of this template when I discovered PappyChkSix's template and beautiful skins. Kicked myself repeatedly and at great length but I was also happy to discover the skins. Some of this template is based on and inspired by his original template and works.
The only skin with this template is USAF Natural Metal / Aluminum.
If you want to make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.
Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.
I use the poor mans' method of bump mapping. I don't have the needed software or skills to create real bump maps. I use two template layers: one black the other white. The white layer is below the black layer and offset one pixel up or down and one pixel left or right. Then adjust the opacity of each layer to create a 'shadow' effect. When done right it gives the illusion it's 3D.
Add your own dirt, details and weathering.
Credit and Thanks to the Mirage Factory for this great little jet.

INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
 
Geary

Skin Template for the ThirdWire C-130A Hercules.

It can be used for SF1 or SF2.

This template is a .psd file at 2048 pixels. It can be reduced for those with low spec computers.

It was made using Photoshop.

Before anyone asks if I can make the lines and rivets darker or lighter, this template allows you to do that yourself by adjusting the opacity of the lines, rivets or any layer of this file. To use it you must have a paint program that reads/modifies .psd files.

Then you can adjust the specular, glossiness and/or reflection entries in the skin's texture.ini file to get the skin to your liking.

Add your own dirt and weathering.

If you just want the Natural Metal / Silver skin depicted in the attached picture, PM me.

If you need help, PM me.

INSTALLATION:  Unzip to a folder/place of your choice.  Copy, Move, Drag-n-Drop or do whatever you wish to get the skin folder into your XXX folders.  Choose the desired skin in the loadout section.  Fly.

I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use.  For any other use, please contact me first. 

If you find any problems with it, please PM me.  If you improve it, please PM me a copy. 

Thanks to all who are helping me learn to skin by direct involvement and/or by inspiration.

If I forget or miss anyone who deserves credit for anything I release, I apologize.  I have no intent to abuse or misuse anyone's property or claim it as my own.  Please contact me to correct any error.
 
Geary
TW_C-130A_Template.7z

"Global Sedition" MiG-21MF Fishbed Skin/Decal Pak


 

-- For SF2, any and all that have the 21MF --


 
Yet another in the Series of "Things I'd Forgotten I'd Done, and Found On My Hard Drive"...
 
This is, basically, a redecalling of the stock MiG-21MF, but with new insignia decal for the 'Global Sedition' (an Evil Force ™, bent of World Domination (etc, and so forth). It's just another skin that can be used in the "What If..." world of the GS vs the North American Alliance.
 
Just for fun!
 
As always, READ the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs, to make it a LOT easier to install (read: drag and drop).
 
enjoy!
Wrench
kevin stein