+suhsjake Posted September 16, 2006 Posted September 16, 2006 I am having problems with the F-5E flaps, After Take off they don't go all the way up. Here's a picture Quote
eightlein Posted September 16, 2006 Posted September 16, 2006 I am having problems with the F-5E flaps, After Take off they don't go all the way up. Here's a picture Check this against what you have. This is stock MF F-5E. [LeftFlap] SystemType=HIGHLIFT_DEVICE CLiftdc=0.20 CDdc=0.035 Cmdc=-0.005 DeltaStallAlpha=-2.00 AreaRatio=1.00 DeploymentMethod=AUTOMATIC_AERODYNAMIC_LOAD Setting[1].Angle=8.0 Setting[1].DeployValue=144.0 Setting[1].RetractValue=154.3 Setting[2].Angle=20.0 Setting[2].DeployValue=97.74 Setting[2].RetractValue=108.76 MaxDeflection=20.0 MinDeflection=0.0 ControlRate=1.0 ModelNodeName=LeftFlap ReverseModelOrientation=TRUE [RightFlap] SystemType=HIGHLIFT_DEVICE CLiftdc=0.20 CDdc=0.035 Cmdc=-0.005 DeltaStallAlpha=-2.00 AreaRatio=1.00 DeploymentMethod=AUTOMATIC_AERODYNAMIC_LOAD Setting[1].Angle=8.0 Setting[1].DeployValue=144.0 Setting[1].RetractValue=154.3 Setting[2].Angle=20.0 Setting[2].DeployValue=97.74 Setting[2].RetractValue=108.76 MaxDeflection=20.0 MinDeflection=0.0 ControlRate=1.0 ModelNodeName=RightFlap Quote
+suhsjake Posted September 16, 2006 Author Posted September 16, 2006 Thats what I have. What should I adjust to make it go up higher. Regards, suhsjake Quote
+Fubar512 Posted September 16, 2006 Posted September 16, 2006 Thats what I have. What should I adjust to make it go up higher. Regards, suhsjake No offense, but have you tried raising them (by hitting the "V" key)? Quote
+suhsjake Posted September 16, 2006 Author Posted September 16, 2006 (edited) Yes I have and after I raise them as far as I can, I can't lower them again (I never messed with the Flaps part of the data file). Edited September 16, 2006 by suhsjake Quote
+Fubar512 Posted September 16, 2006 Posted September 16, 2006 Yes I have and after I raise them as far as I can, I can't lower them again (I never messed with the Flaps part of the data file). The flaps are set to automatic in the data.ini. Perhaps you're not traveling fast enough (over 310 kias) for them to retract. You can always edit the flaps DeploymentMethod from "AutomaticAerodynamicLoad" to 'Manual", in the F-5E_Data.ini Quote
+suhsjake Posted September 16, 2006 Author Posted September 16, 2006 Thanks, Thats what it did know its much better. ALL FIXED Quote
planes Posted October 10, 2007 Posted October 10, 2007 can someone help me i just downloaded the F-15E strike eagle when i press the keys to deploy flaps it says flaps deployed but the flaps are not coming down????? help tks... Quote
+Fubar512 Posted October 10, 2007 Posted October 10, 2007 can someone help me i just downloaded the F-15E strike eagle when i press the keys to deploy flaps it says flaps deployed but the flaps are not coming down????? help tks... That's strange, just tried the '15E and the flaps work fine. Quote
planes Posted October 10, 2007 Posted October 10, 2007 That's strange, just tried the '15E and the flaps work fine. is the F-15E workable for WOE???? Quote
+Fubar512 Posted October 10, 2007 Posted October 10, 2007 is the F-15E workable for WOE???? Yes, models work "all across the board". I, in fact, tested it in WoE. Quote
planes Posted October 10, 2007 Posted October 10, 2007 (edited) Yes, models work "all across the board". I, in fact, tested it in WoE. how can i upload a picture so that i can show you??? Edited October 10, 2007 by planes Quote
+Fubar512 Posted October 10, 2007 Posted October 10, 2007 how can i upload a picture so that i can show you??? Convert it to a jpeg format, upload it to our gallery, and then copy and paste the url link to that image on to your reply. Quote
+Fubar512 Posted October 10, 2007 Posted October 10, 2007 Make sure that the flap entries in your F-15E_Data.ini match these values: [LeftFlap] SystemType=HIGHLIFT_DEVICE CLiftdc=0.34 CDdc=0.080 Cmdc=0.005 DeltaStallAlpha=-3.75 AreaRatio=1.00 DeploymentMethod=MANUAL Setting[1].Angle=45.0 Setting[1].DeployValue=120.0 Setting[1].RetractValue=126.0 MaxDeflection=45.0 MinDeflection=0.0 ControlRate=0.3 AnimationID=5 ModelNodeName=Left_Flap ReverseModelOrientation=FALSE [RightFlap] SystemType=HIGHLIFT_DEVICE CLiftdc=0.34 CDdc=0.080 Cmdc=0.005 DeltaStallAlpha=-3.75 AreaRatio=1.00 DeploymentMethod=MANUAL Setting[1].Angle=45.0 Setting[1].DeployValue=120.0 Setting[1].RetractValue=126.0 MaxDeflection=45.0 MinDeflection=0.0 ControlRate=0.3 AnimationID=5 ModelNodeName=Right_Flap ReverseModelOrientation=FALSE Quote
planes Posted October 11, 2007 Posted October 11, 2007 (edited) thanks Fubar512 its working now seems like the flap files are the cause of it. thanks for helping and fast reply Edited October 11, 2007 by planes Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.