graven Posted October 5, 2006 Posted October 5, 2006 Tried to add F-5E to WOE and it won't fly . Any help? Quote
Aintry Posted October 5, 2006 Posted October 5, 2006 (edited) Could you be more specific? Does it blow up on the runway? Does it cause a CTD when you try to load it? Does it not show up on the list of available planes? There are a number of things that might make a plane non-functional. Edited October 5, 2006 by Tristan Quote
graven Posted October 6, 2006 Author Posted October 6, 2006 (edited) If I start in the air It won't gain arispeed, even at full AB, If I start on the runway it won't move at all. In the air I can get abought 135kn Edited October 6, 2006 by graven Quote
Aintry Posted October 6, 2006 Posted October 6, 2006 Are you running it on a 3rd-party terrain or on a stock terrain? Quote
Aintry Posted October 6, 2006 Posted October 6, 2006 This sucks -- I think this problem has been covered before and the solution is relatively simple. But it eludes me anyway. If nobody else picks up this thread, you could probably find the solution through a forum search. Sorry for the lame advice. Quote
+Fubar512 Posted October 6, 2006 Posted October 6, 2006 This doesn't sound like any of the Mirage Factory's F-5s. Copy and paste the the engine section of the F-5E_Data.ini and we'll help you fix it. Quote
graven Posted October 6, 2006 Author Posted October 6, 2006 (edited) Strange the Mig-28 version flys OK [Engine1] SystemType=JET_ENGINE InputName=THROTTLE_CONTROL EngineID=1 HasAfterburner=TRUE NumAfterburnerStages=4 SLThrustDry=14590 SLThrustWet=22240 ThrustAngles=0.0,0.0,0.0 ThrustPosition=-0.331,-0.47,0.00 ThrottleRate=0.5 NozzleAnimationID=9 IdleThrottle=0.10 IdleRPM=0.68 IdleNozzle=0.0 CruiseThrottle=0.37 CruiseRPM=0.82 CruiseNozzle=1.0 MilThrottle=0.65 MilRPM=1.00 MilNozzle=1.0 MaxThrottle=0.78 MaxRPM=1.00 MaxNozzle=1.0 FullABThrottle=1.12 FullABRPM=1.00 FullABNozzle=0.0 AltitudeTableNumData=10 AltitudeTableDeltaX=3048.0 AltitudeTableStartX=0.0 AltitudeTableData=1.000,0.802,0.634,0.496,0.381,0.288,0.206,0 .147,0.105,0.000 DryMachTableNumData=4 DryMachTableDeltaX=0.4 DryMachTableStartX=0.0 DryMachTableData=1.000,0.980,1.172,0.000 WetMachTableNumData=7 WetMachTableDeltaX=0.4 WetMachTableStartX=0.0 WetMachTableData=1.000,0.991,1.207,1.683,2.473,2.750,3.027 MaxInletTemperature=120 GyroscopicInertia= TSFCM0=0.860 TSFCM1=1.270 AfterburnerTSFC=1.930 MinFuelFlow=0.01 ExhaustEmitterName=F5ECleanExhaustEmitter ExhaustPosition=-0.331,-5.944,-0.0 AfterburnerNodeName=afterburner AfterburnerEmitterName=AfterburnerEmitter4 MinExtentPosition=-0.58,-5.907,-.21 MaxExtentPosition=-0.07,-5.700,0.22 FireSuppression=TRUE Edited October 6, 2006 by graven Quote
+Fubar512 Posted October 6, 2006 Posted October 6, 2006 Here's the fix, courtesy of Florian-AmokFloo-Schneider: Open the F-5e_DATA.ini and remove in the first section (MissionData) the "," in the "Ceiling" Line. [MissionData] NationName=USAF ... MaxMissionRadius=640 Ceiling=50,800 ------> change to: Ceiling=20800 MinBaseSize=MEDIUM That should cure it. Quote
Guest Sony Tuckson Posted October 6, 2006 Posted October 6, 2006 Hi You speak about the Mig28 version, this leads me to think you use an old F-5E model Check out for the Mirage Factory model, you shouldn't have any problem with it (and it comes with a swiss skin, fitting nicely in WoE ;) ) Quote
graven Posted October 7, 2006 Author Posted October 7, 2006 Got the new F-5E Works fine ,Old F5 Is stuck in the runway Quote
sonnie Posted October 27, 2006 Posted October 27, 2006 hay,,,!!!!!!!i've been downloading CF-5A & F-5E Tiger II from column5, after downloading it i extract all the files to my Wings Over Europe then aircraft directory, after successfully extract all the files i run the game n IT REALLY2 WORKS,,,,,,,,,!!!!!!!!!god,,,!!!??? what happens 2 your F-5?????try downloading it again n follow my instructions,,,,,,,,key,,,,,,,,thx be 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.