Decal problem with "4" 1RNAS Tripe

[+quack74 329]

I managed to add the "4" to the upper fuselage of the 4 1RNAS Tripe I painted. But there's a problem.

Anybody know how to fix this. When I added the upper "4" decal it appeared on the right lower fuselage as well. ???? I'll list my decal config and a photo.

 

 

[Decal001]

MeshName=Tail

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=Triplane/1RNAS 4/D/4

Position=-1.70,-0.070

Scale=1.35

DecalMaxLOD=3

Reverse=FALSE

 

[Decal002]

MeshName=Tail

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=Triplane/1RNAS 4/D/4

Position=-1.70,-0.070

Scale=1.35

DecalMaxLOD=3

 

[Decal003]

MeshName=Tail

DecalLevel=2

DecalFacing=TOP

FilenameFormat=Triplane/1RNAS 4/D/4

Position=0.08,-1.950

Scale=1.35

DecalMaxLOD=3

 

[Decal004]

MeshName=Tail

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=Triplane/1RNAS 4/D/N5377

Position=-2.900,0.200

Scale=0.5

DecalMaxLOD=3

Reverse=FALSE

 

 

[Decal005]

MeshName=Tail

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=Triplane/1RNAS 4/D/N5377

Position=-2.900,0.200

Scale=0.5

DecalMaxLOD=3

[+russouk2004 6,958]

Try making it smaller and see what happens

Edited February 14, 2009 by russouk2004

[Southside Bucky 1]

Hi Quack.

 

I know you've got enough on your plate with the upper decking No.4 'n all, but while you're working in that area, I was thinking you might want to have a look at the positioning of the two white bars in comparison with the photos...D'you think they're a bit too far forward and maybe a tad too small?

 

Sorry if I'm being a pain in the A***, man...

[+quack74 329]

No, your right. I'll have to patch this one anyway. I'll fix the whole thing.

[+quack74 329]

I still need to know why the "4" decal shows up on a panel it's not intended for. As I have in the above post, I have a "4" on the left and right Tail section, and one "4" on the Top. Why or how is the "Top 4" showing up ontop of a right side tail decal?

[Heck 496]

Hi, Quack. This looks like a problem with the model itself. Many of these models for addons were created for another sim called Wings of War (I think), and they were converted to be useful in First Eagles. Unfortunately some, like the Pfalz D3, have issues because of the way the model is constructed. They have odd wrapping issues in their fuselages, causing decals to bleed into areas where they shouldn't be, or lines you paint on to make sudden and odd turns, which is what I think the issue is here. It's a defect in the model itself, so I don't think you're going to be able to cure it. On this skin you'll probably have to sacrifice a little accuracy because of the model's construction. Sorry.

 

Heck

[+quack74 329]

Thanks Heck. I figured that might be the problem. Oh well, no "4" on top

Sorry there bucky. I tried

I still can change the 1RNAS bars on the rear tail.

[Heck 496]

Thanks Heck. I figured that might be the problem. Oh well, no "4" on top

Sorry there bucky. I tried

I still can change the 1RNAS bars on the rear tail.

 

You've been producing some great skins, Quack. Thanks. Although, you seem to have some sort of triplane fixation. Doctors can help with that. Pups could use some of your help too. And when that 1&1/2 strutter appears.....