+quack74 329 Posted February 14, 2009 I managed to add the "4" to the upper fuselage of the 4 1RNAS Tripe I painted. But there's a problem. Anybody know how to fix this. When I added the upper "4" decal it appeared on the right lower fuselage as well. ???? I'll list my decal config and a photo. [Decal001] MeshName=Tail DecalLevel=2 DecalFacing=RIGHT FilenameFormat=Triplane/1RNAS 4/D/4 Position=-1.70,-0.070 Scale=1.35 DecalMaxLOD=3 Reverse=FALSE [Decal002] MeshName=Tail DecalLevel=2 DecalFacing=LEFT FilenameFormat=Triplane/1RNAS 4/D/4 Position=-1.70,-0.070 Scale=1.35 DecalMaxLOD=3 [Decal003] MeshName=Tail DecalLevel=2 DecalFacing=TOP FilenameFormat=Triplane/1RNAS 4/D/4 Position=0.08,-1.950 Scale=1.35 DecalMaxLOD=3 [Decal004] MeshName=Tail DecalLevel=2 DecalFacing=RIGHT FilenameFormat=Triplane/1RNAS 4/D/N5377 Position=-2.900,0.200 Scale=0.5 DecalMaxLOD=3 Reverse=FALSE [Decal005] MeshName=Tail DecalLevel=2 DecalFacing=LEFT FilenameFormat=Triplane/1RNAS 4/D/N5377 Position=-2.900,0.200 Scale=0.5 DecalMaxLOD=3 Share this post Link to post Share on other sites
+russouk2004 6,958 Posted February 14, 2009 (edited) Try making it smaller and see what happens Edited February 14, 2009 by russouk2004 Share this post Link to post Share on other sites
Southside Bucky 1 Posted February 14, 2009 Hi Quack. I know you've got enough on your plate with the upper decking No.4 'n all, but while you're working in that area, I was thinking you might want to have a look at the positioning of the two white bars in comparison with the photos...D'you think they're a bit too far forward and maybe a tad too small? Sorry if I'm being a pain in the A***, man... Share this post Link to post Share on other sites
+quack74 329 Posted February 16, 2009 No, your right. I'll have to patch this one anyway. I'll fix the whole thing. Share this post Link to post Share on other sites
+quack74 329 Posted February 16, 2009 I still need to know why the "4" decal shows up on a panel it's not intended for. As I have in the above post, I have a "4" on the left and right Tail section, and one "4" on the Top. Why or how is the "Top 4" showing up ontop of a right side tail decal? Share this post Link to post Share on other sites
Heck 496 Posted February 17, 2009 Hi, Quack. This looks like a problem with the model itself. Many of these models for addons were created for another sim called Wings of War (I think), and they were converted to be useful in First Eagles. Unfortunately some, like the Pfalz D3, have issues because of the way the model is constructed. They have odd wrapping issues in their fuselages, causing decals to bleed into areas where they shouldn't be, or lines you paint on to make sudden and odd turns, which is what I think the issue is here. It's a defect in the model itself, so I don't think you're going to be able to cure it. On this skin you'll probably have to sacrifice a little accuracy because of the model's construction. Sorry. Heck Share this post Link to post Share on other sites
+quack74 329 Posted February 17, 2009 Thanks Heck. I figured that might be the problem. Oh well, no "4" on top Sorry there bucky. I tried I still can change the 1RNAS bars on the rear tail. Share this post Link to post Share on other sites
Heck 496 Posted February 17, 2009 Thanks Heck. I figured that might be the problem. Oh well, no "4" on top Sorry there bucky. I tried I still can change the 1RNAS bars on the rear tail. You've been producing some great skins, Quack. Thanks. Although, you seem to have some sort of triplane fixation. Doctors can help with that. Pups could use some of your help too. And when that 1&1/2 strutter appears..... Share this post Link to post Share on other sites
