UK_Widowmaker Posted July 1, 2009 Posted July 1, 2009 (edited) Hiya This is a picture of an Alb from those heady days of Phase 1 You will notice some lovely looking bulletholes in the Fuselage.... my question is:- I don't see bulletholes on the fuselage anymore...and not all that many on the wings either. I have the graphics setting correct to show damage, but is this something my end?...Or have you 'toned it down?' (as you can see..my pilot was very lucky that day!) Edited July 1, 2009 by UK_Widowmaker Quote
Creaghorn Posted July 1, 2009 Posted July 1, 2009 oh well, i see bulletholes in my alb quite often like in this picture. maybe you are the better pilot? or is it maybe a nvdia/ati thing, like fire and mirror and stuff like this. Quote
+Olham Posted July 1, 2009 Posted July 1, 2009 I never had bulletholes like this in my fuselage. So either I am very good, or there IS a difference between the cards (Now, even IF I'm very good, there must be)? Quote
+Winder Posted July 1, 2009 Posted July 1, 2009 Hiya This is a picture of an Alb from those heady days of Phase 1 You will notice some lovely looking bulletholes in the Fuselage.... my question is:- I don't see bulletholes on the fuselage anymore...and not all that many on the wings either. I have the graphics setting correct to show damage, but is this something my end?...Or have you 'toned it down?' (as you can see..my pilot was very lucky that day!) Goto workshops and check your Graphics Settings ; Aircraft Skins. If its on the highest then note that it says (no visible damage) Drop it down to Normal Res and you will see bullet holes. HTH WM Quote
Canvas Wings Posted July 1, 2009 Posted July 1, 2009 (edited) Goto workshops and check your Graphics Settings ; Aircraft Skins. If its on the highest then note that it says (no visible damage) Drop it down to Normal Res and you will see bullet holes. HTH WM Well, it's no big deal, -but maybe there is a difference in cards. I have my settings at 'normal res' and I never see bullet holes or any other damage... Edited July 1, 2009 by Canvas Wings Quote
+Winder Posted July 1, 2009 Posted July 1, 2009 Well, it's no big deal, -but maybe there is a difference in cards. I have my settings at 'normal res' and I never see bullet holes or any other damage... Its actually a function of Vid Card memory - there should be only a handful of cards that don't show bullet damage on Normal. In your case try the next notch down which is normal CFS3 res anyway. HTH WM Quote
Herr Prop-Wasche Posted July 1, 2009 Posted July 1, 2009 Damage model and bullet strength also effect visible damage. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.